• Title/Summary/Keyword: 파 간섭

Search Result 609, Processing Time 0.028 seconds

중력파: 우주를 보는 새로운 창

  • Lee, Hyung Mok
    • The Bulletin of The Korean Astronomical Society
    • /
    • v.41 no.1
    • /
    • pp.31.1-31.1
    • /
    • 2016
  • 중력파의 존재가 예측된 것은 100년전 일이지만 지난해 9월 14일에야 LIGO에 처음으로 직접 검출되었다. 줄력파는 질량을 가진 물질이 가속될 때 만들어져 빛의 속도로 전파되는 현상이다. LIGO는 레이저 간섭 현상을 이용해 서로 수직인 방향의 두 팔의 길이가 상대적으로 진동하는 것을 측정하는 기기로서 지난 2002년 첫 관측을 시작한 이래 지속적인 감도 향상을 통해 아주 미세한 진폭을 가지는 중력파를 직접 검출하는데 성공하였다. 이번에 관측된 중력파는 두개의 블랙홀로 이루어진 쌍성이 궤도 운동을 하면서 중력파를 방출함에 따라 궤도 반지름이 점차 줄어들어 궁극적으로 충돌하기 직전 0.1초 정도 사이에 방출한 것으로서 이론적인 파형과의 비교를 통해 기존의 어떤 방법보다도 정확하게 블랙홀들의 질량과 거리를 측정할 수 있게 해 주었다. LIGO의 감도가 앞으로도 더욱 향상될 것이며 이에 따라 더 많은 중력파 천체가 발견될 것이다. 중력파 관측을 통해 우리는 기존의 망원경으로 볼 수 없었던 새로운 천체 현상을 자구 관측하게 될 것이며 이에 따라 블랙홀이나 중성자별과 같은 밀집 천체를 더 자세하게 탐구할 수 있을 뿐 아니라 우주의 구조나 진화에 대한 새로운 연구가 가능해질 것이다.

  • PDF

Time Variation Characteristics of Internal Waves and Acoustic Pressures Observed in Shallow Water (천해에서 관측한 내부파와 음장의 시간변화 특성)

  • 나영남
    • Proceedings of the Acoustical Society of Korea Conference
    • /
    • 1998.06d
    • /
    • pp.18-24
    • /
    • 1998
  • 최근의 연구를 통해 해양의 내부파가 음파전달에 영향을 주어 비정상적인 손실을 일으키는 것을 밝혀졌다. 한국 동해세서도 강한 수온약층을 중심으로 내부파가 존재할 것으로 여겨져 왔으며, 이를 규명하고자 '98년 6월 각종 장비를 동원한 해양 관측을 동해항 근해에서 실시하였다. 또한 내부파에 의한 음파의 전파 특성을 추정학자 음원과 수신기를 고정한 상태에서 음향 실험을 실시하였다. 실험 결과 전형적인 내부파는 주기가 약 5-12분이고 최대 진폭은 15m 정도임이 밝혀졌다. 특히 10여개의 내부파 묶음이 약 36cm/sec 의 속도로 이동하고 있음도 확인하였다. 15개의 음향센서로 이뤄진 수직선배열 수신기와 음원을 이용한 음향 실험결과 역시 4-12분 주기에서 부분적으로 스펙트럼이 높게 나타났으며, 특히 주파수 1kHz 인 경우에는 4, 6분 주기에서 15개의 센서에 대해 일관되게 높은 스펙트럼 준위가 나타났다. 내부파에 의한 이러한 음파의 특성은 음파의 모든간 결함으로 나타나는 일종의 간섭 현상으로 설명될 수 있다.

  • PDF

Effects of the Length and Diameter of Shock Tube on the Shock Train Phenomenon (충격파관의 길이와 직경이 Shock Train 현상에 미치는 영향)

  • Kim, Dong Wook;Kim, Tae Ho;Yoon, Young Bin;Kim, Heuy Dong
    • Transactions of the Korean Society of Mechanical Engineers B
    • /
    • v.41 no.9
    • /
    • pp.615-622
    • /
    • 2017
  • A normal shock wave is initially formed in the shock tube that migrates towards the closed end of the tube, which, in turn, leads to the reflection of shock. Due to the interaction of the reflected shock with the boundary layer, bifurcation of the shock wave takes place. A shock train will be generated after the bifurcated shock wave approaches the contact surface. Until now, only a few studies have been conducted to investigate this shock train phenomenon inside the shock tube. For the present study, a CFD analysis has been performed on a two dimensional axisymmetric model of a shock tube using unsteady, compressible Navier-Stokes equations. In order to investigate the detailed characteristics of the shock train phenomenon, quantitative studies have been performed by varying shock tube length, diameter under fixed diaphragm, and pressure ratio inside a shock tube.

Fabrication of Real-Time Hologram for the Implementation of 3-D Moving Picture (3차원 동영상을 구현하기 위한 실시간 홀로그램의 제작)

  • 배장근;박세준;김수중
    • Journal of the Korean Institute of Telematics and Electronics T
    • /
    • v.36T no.1
    • /
    • pp.25-31
    • /
    • 1999
  • A real-time holography system using LCD with CCD camera is proposed. In this system, the rainbow hologram is used since it can be reconstructed by white light source. And to record on CCD camera, a kind of in-line holography method is used to widen the width of the fringe pattern. The interference fringe pattern by proposed system is detected with CCD camera and transferred to the LCD. A 3-dimensional image is reconstructed when the white light source illuminates the LCD. If the position of the input image is changed, that of the reconstructed image is also changed. So it can represent 3-dimensional moving images at real-time. In this paper, to confirm the usefulness of the proposed method, the reconstructed image by holographic film is compared to the same reconstructed image by LCD. In the recording process, the optimal ratio of the reference and object beam intensity is also investigated.

  • PDF

Effects of Partial-band Noise Interference on the Performance of Hybrid Ds/SFH-MSK Spectrum System in Rayleigh Fading Channel (Rayleigh Fading 채널에서 DS/SFH-MSK 시스템의 성능에 대한 부분대역 잡음 간섭의 특성)

  • 김윤영;안병록;유흥균
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.12 no.2
    • /
    • pp.251-256
    • /
    • 2001
  • An error probability analysis is performed far a hybrid DS/SFH spread-spectrum system using minimum shift keying(MSK) modulation. The channel is assumed to be a Rayleigh fading channel with partial-band noise interference. Expressions are derived for the bit error rate(BER) in the context of Rician and Rayleigh fading channels, as a function of the average signal-to-noise ratio(SNR) $E_b/N_0$, the average signal-to- interference ratio(SJR) $E_b/N_J$, and channel parameters. As a result, in the fading channel with large Rician factor, K, which denotes the ratio of power of the direct and the diffused components, the partial-band interference is the worst case. On the other hand, in Rayleigh fading channel(K=0), the full-band interference($\rho$=1) brings the system to the worst case. Performance comparisons among various channels show that the factor K has much large effect on overall performance. For example, in conditions of $\rho$=0.1 and BER=$10^-2$, the system in Rician channel with K=10 requires more 1.9 dB SNR than that in AWGN channel, whereas it is less 5 dB SNR than that in the Rayleigh channel with K=0.

  • PDF

A Study on the Tool Vibration Measurement Using the Fiber Optic Interferometric Sensor in Lathe Cutting Process (광섬유 간섭계 센서를 이용한 선삭가공 공구진동 측정 연구)

  • Lee, Jongkil
    • 대한공업교육학회지
    • /
    • v.32 no.2
    • /
    • pp.171-187
    • /
    • 2007
  • The purpose of this study is to measure the lathe tool vibration and verify its usefulness using the fiber optic interferometeric sensor instead of using common accelerometer. To compare two vibration signals a Fabry-Perot fiber optic sensor(FOS) is directly attached to the left-side surface of the lathe tool and an accelerometer is attached near to the fiber optic sensor. Measurement signals from the FOS and theoretical results of receptance simulation are compared. When the amplitude of tool vibration increased the frequency shift phenomena was occurred. This means that mass effect occurred and vibration spectrum moved to the low frequency region. Generally this results is agreement to the regenerative chatter. The chatter frequency is not same as the natural frequency of the tool itself. The FOS can also applied to laboratory experiments for students. This experimental technique is perhaps the first attempts because of directly attachment technique. Therefore, suggested Fabry-Perot fiber optic sensor can be used to monitoring the tool wear and vibration.

A Study on Performance Improvement of CMMB Receiver to Reduce an Adjacent Channel Interference (인접 채널 간섭 제거를 통한 CMMB 수신기의 성능 향상에 관한 연구)

  • Yu, Yeong-Cheol
    • Journal of Korea Multimedia Society
    • /
    • v.15 no.3
    • /
    • pp.364-371
    • /
    • 2012
  • Currently, CMMB(China Mobile Multimedia Broadcasting) and the conventional analog TV broadcasting have transmitted by using UHF(Ultra High Frequency : 474MHz~754MHz) band. Normally, the transmission power of the digital TV broadcasting is lower than the conventional analog TV broadcasting to protect the reception quality of the conventional analog TV broadcasting. The reception sensitivity of CMMB receiver has severely deteriorated due to adjacent the conventional analog TV broadcasting signals which called ACI (Adjacent Channel Interference). To improve the reception sensitivity of a CMMB receiver on ACI environment, this paper proposed a simple method which is tuning a cut off frequency of LPF (Low Pass Filter). From the experiment, the reception sensitivity of CMMB receiver was improved as 11.3dB.

A Study of the Control of Plume-Induced Flow over a Missile Afterbody (Missile Afterbody에서 Plume-Induced Flow의 제어에 관한 연구)

  • ;Young-Ki Lee
    • Proceedings of the Korean Society of Propulsion Engineers Conference
    • /
    • 2003.05a
    • /
    • pp.45-48
    • /
    • 2003
  • The plume interference is a complex phenomenon, consisting of plume-induced boundary layer separation, separated shear layer, multiple shock waves, and their interactions. The base knowledge of plume interference effect on powered missiles and flight vehicles is not yet adequate to get an overall insight of the flow physics in plume-freestream flow field. Computational studies are performed to better understand the flow physics of the plume-induced shock and separation for Simple, Rounded, Porous-extension test model configurations. The present study simulates highly underexpanded exhaust plume effect on missile body at the transoni $c^ersonic speeds. In order to investigate the plume-induced separation phenomenon, Simple, Rounded and Porous-extension plate are attacked to the missile afterbody. The computational result shows that the rounded afterbody and the porous-extension wall attached at the missile base can alleviate the plume-induced shock wave and separation phenomenon and improve the control of the missile body.dy.

  • PDF

An Interference Cancellation Technique for Digital On-Channel Repeaters in T-DMB System (지상파 DMB 디지털 동일 채널 중계기에서의 간섭 제거 기법)

  • Hong, Jin-Kyu;Choi, Jin-Yong;Hur, Min-Sung;Suh, Young-Woo;Seo, Jong-Soo
    • Proceedings of the Korean Society of Broadcast Engineers Conference
    • /
    • 2008.11a
    • /
    • pp.193-196
    • /
    • 2008
  • 지상파 DMB 동일 채널 중계기에서는 송신 안테나로부터 수신 안테나로 재입력되는 궤환 신호가 존재한다. 이 궤환 신호는 적절히 제거되지 않을 경우 수신 신호에 간섭으로 작용하게 되어 중계기 시스템의 안정성이 크게 떨어지게 된다. 과거에 진행된 연구에서는 궤환 채널을 추정하여 간섭을 제거시키는 궤환 신호 제거기(feedback canceller) 를 사용하여 이와 같은 문제를 해결하였다. 하지만 기존의 추정 알고리즘은 간단한 구현에 비해 수렴 성능과 속도 면에서 만족할만한 성능을 얻을 수 없었으며, 신호 간 상관도 제거를 위해 충분한 시간 지연을 해야 하는 단점이 있다. 본 논문은 궤환 채널 추정에 적합한 PNLMS (Proportionate Normalized Least Mean Squares) 적응형 알고리즘을 적용해 새로운 궤환 신호 제거 기법을 제안하였으며, 전산 모의 실험을 통해 이와 같은 문제를 효과적으로 해결할 수 있음을 보여준다.

  • PDF

Multistage Parallel Nulling-Partial PIC Receiver for Downlink MIMO MC-CDMA Systems (하향링크 다중 안테나 MC-CDMA 시스템을 위한 다단계 병렬 널링 및 병렬 부분 간섭 제거 수신기 설계)

  • 구정회;김경연;심세준;이충용
    • Journal of the Institute of Electronics Engineers of Korea TC
    • /
    • v.41 no.11
    • /
    • pp.1-7
    • /
    • 2004
  • We propose multistage parallel nulling (MPN) partial parallel interference cancellation (PPIC) receiver for downlink multiple-input multiple-output (MIMO) multicarrier (MC)-code division multiple access (CDMA) systems. Though the V-BLAST is a popular MIMO receiver, it shows error floor for multiuser downlink MIMO MC-CDMA systems. The proposed MPN-PPIC receiver does not produce error floor for multiuser case, and achieves substantial performance gains with multistage processing. For single user case, the proposed method also surpasses the V-BLAST receiver with multistage processing for MIMO MC-CDMA systems with chip level interleaving. The system performance of the proposed MPN-PPIC receiver is evaluated through computer simulations.