• Proceedings of the KSME Conference
• /
• 2000.11a
• /
• pp.268-273
• /
• 2000

Mechanical properties of the materials used for transportations and industrial machinery under high strain rate loading conditions are required to provide appropriate safety assessment to these mechanical structures. The Split Hopkinson Pressure Bar(SHPB) technique, a special experimental apparatus, can be used to obtain the material behavior under high strain rate loading condition. In this paper, dynamic deformation behaviors of the aluminum alloys, Al2024-T4, Al6061-T6 and Al7075-T6, under high strain rate compressive and tensile loading are determined using SHPB technique.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.723-726
• /
• 2011

전 세계적으로 사회기반시설 및 신재생 에너지 생산을 위한 공간부족 문제를 해결하기 위하여 초대형 부유구조물에 대한 관심이 증가하고 있다. 다양한 사용분야에 대한 안정성 확보를 위해 파랑하중에 의한 동적 응답과 부유체의 강성 대비 길이 효과로 인해 발생할 수 있는 특이 거동에 대한 분석이 필요하다. 초대형 부유구조물의 경우 중앙부에 비해 양끝 단에서 과도한 응답이 발생하며, 이를 해결하기 위해 입사파가 들어오는 초대형 부유구조물의 단부에 부착되는 다양한 감요장치(anti-motion device)가 제안되어지고 있다. 초대형 부유구조물에 감요장치가 적용될 경우 입사파에 의한 동적 파압을 감소시켜 구조물의 전반적인 응답을 줄여줄 수는 있지만 감요장치의 질량이 클 경우 오히려 끝단의 응답을 증폭시킬 수 있다. 본 논문에서는 양단 자유 경계조건의 탄성지지된 보를 이용하여 초대형 부유구조물의 길이와 끝단에 부착된 감요장치의 질량으로 인한 영향을 분석하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.9
• /
• pp.569-574
• /
• 2020

A floating dock is the main facility for launching ships. In the early 2000s, ship-launching technology using floating docks was developed in Korea. Therefore, the opportunity to participate in new construction projects without investment in dry docks has expanded. In this paper, a basic calculation for the safe mooring of a floating dock was performed, and a mooring system was designed based on this. This study was conducted considering the typhoon situation, which is the most serious environmental requirements of Daebul Pier, a site to be installed and operated, for a floating dock. The design load was calculated by wind load, tidal load, and wave-induced load in accordance with the internationally accepted standards. After performing the initial arrangement of the mooring line of the floating dock using the existing mooring facilities of Daebul Pier, the minimum breaking load for each mooring line was calculated for the given load. Based on the calculation, the mooring arrangement was modified to minimize the breaking load, and a final specification of each mooring line was selected.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.3
• /
• pp.503-512
• /
• 1990

In this study, a penalty method effective for the case that has no snap-back phenomenon, is proposed and an adaptive method which choose the penalty method or Riks' type method, is suggested for the case of snap-back problem. And for the case that loads are applied to one or more points of a structure, the Riks' method is applied in general, but under certain condition choice of new incremental load parameter is suggested to accelerate the convergence rate. Finally, for the case that displacements of a structure are controlled at one or more points Riks' type method is proposed. In this case, the proposed method is applied in general but under certain condition it is recommended to choose other incremental displacement parameter to eliminate probable divergence. Five examples are analysed and compared with the result of published literature.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.37 no.3
• /
• pp.179-186
• /
• 2024

In this paper, a modification coefficient for equivalent single degree of freedom (SDOF), considering the plasticity range of the member subjected to shock wave type of blast load, was developed. The modification coefficient for the equivalent SDOF was determined through comparison with the analysis of a multi-degree of freedom (MDOF) system. The parameters influencing the equivalent SDOF system analysis were chosen as the boundary conditions of the member and the ratio of the duration of blast load to the natural period of the member. The modification coefficient was calculated based on the elastic load-mass transformation factor. The modification coefficient curve was derived using an elliptical equation to ensure it exists between the upper and lower parameter bounds. Using the modification coefficient on examples with varying cross sections and boundary conditions reduced the SDOF analysis error rate from 15% to 3%. This study shows that using the modification coefficient significantly improves the accuracy of SDOF analysis. The modification coefficient proposed in this study can be used for blast analysis.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.11
• /
• pp.1094-1103
• /
• 2008

A fuel specific detonation wave in a pipe propagates with a predictable wave velocity. This internal detonation wave speed determines the level of flexural wave excitation of pipes and the possibility of resonant response leading to a large displacement. In this paper, we present particular solutions of displacements and the resonance conditions for internally loaded pipe structures. These analytical results are compared to numerical simulations obtained using a hydrocode(multi-material blast wave analysis tool). We expect to identify potential explosion hazards in the general power industries.

• Tunnel and Underground Space
• /
• v.21 no.6
• /
• pp.480-493
• /
• 2011

Dynamic rock property is one of most important parameters in design of earthquake-resistant structures. In this study, free-free resonant column test has been conducted to obtain dynamic Young's modulus, dynamic shear modulus, and damping ratio among dynamic properties with granite specimen of Chungnam Yeongi area. The dynamic properties obtained from this test were compared with the physical properties from static rock tests, and their relationship has been analyzed. From our study, it has been concluded that the dynamic Young's modulus and the dynamic shear modulus are linearly proportional to the elastic wave velocity. And also the damping ratio has been identified to be in non-linear inverse proportion to the elastic wave velocity.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2010.04a
• /
• pp.670-673
• /
• 2010

무기저 손상 진단 기법은 능동센서를 이용하여 과거의 기저자료와 현재 상태에서 취득한 유도파의 정보를 비교하지 않고, 구조물의 현재 상태에서 취득한 신호만을 분석함으로써 구조물의 상태를 진단하는 기법이다. 온도 변화 및 하중 변화 등의 외부 환경의 변화에 민감한 유도파의 특성으로 인하여 기저자료를 이용하는 과거의 방법론은 현실적용성이 떨어질 우려가 있다. 본 무기저 손상 진단 기법은 외부 환경적 영향을 최소화함으로써 구조물의 상태를 효율적으로 진단할 수 있다. 최초, 본 연구진에서 제안하였던 무기저 기법은 두 쌍의 능동센서를 구조물에 양면 대칭으로 배치시켜 능동센서의 극성을 이용한 방법이었다. 하지만 실제 구조물의 양면에 완벽한 대칭성을 유지하며 능동센서를 배치시키는 것은 사실상 불가능하다. 이와 같은 한계점을 극복하기 위해 신개념의 듀얼 능동센서를 활용한 무기저 손상 진단 기법이 제안되었고, 수치해석 및 연구실 환경에서 제한적으로 그 실용성이 검증되었다. 본 논문에서는 무기저 손상 진단 기법의 실 구조물에의 적용성을 폐교량을 대상으로 검토하였다. 특히, 보강재를 포함하는 영역에서 본 기법을 적용함으로써 실제 구조물에 적용 가능성을 검증하였다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.30 no.4
• /
• pp.180-190
• /
• 2018

The preliminary study was carried out to utilize the rolling porous pendulum plate as a hybrid system combining blocking and extracting of wave energy. The Galerkin method suggested by Porter and Evans (1995) was used to solve the diffraction and radiation problems to obtain reflection and transmission coefficient, roll displacement, extracted power. The Galerkin method provides better convergence than the matched eigenfunction expansion method (MEEM), which improves the accuracy of the analytical solution even if the CPU time is shorter. The porous plate can not be said to be more effective than the impermeable plate in terms of wave energy extraction and wave blocking, but it has the advantage of reducing the wave load and exchanging seawater.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.20 no.5
• /
• pp.629-640
• /
• 2007

In this paper an analytical study is carried out to improve the capacity of absorbing boundary using dashpot, one of the most widely used absorbing boundaries in FEM. Using 2-D harmonic plane wave equation, absorbing boundary condition is modified to maximize its capacity according to the incident angle. Validity of the absorbing boundary conditions which is modified is investigated by adopting the solution of Miller and Pursey. The Miller and Pursey's problem is then numerically simulated using the finite element method. The absorption ratios are calculated by comparing the displacements at the absorbing boundary to those at the free field without the absorbing boundary. The numerical study is carried out through comparison of displacement at the interior region and the boundary of the numerical model.