• Title/Summary/Keyword: 파장 강도

Search Result 300, Processing Time 0.033 seconds

Effect of Light Emitting Diode Irradiation on Tyrosinase Activity during Storage (저장 중 발광다이오드 광 조사가 타이로시네이스 활성에 미치는 영향)

  • Jung, Hyo Yeon;Kim, Jung Sun;Noh, Bong Soo
    • Korean Journal of Food Science and Technology
    • /
    • v.47 no.6
    • /
    • pp.785-788
    • /
    • 2015
  • In this study, the effect of light irradiation on tyrosinase activity during storage in a low temperature incubator was investigated, with the goal of identifying the appropriate wavelength and intensity of light for inhibiting tyrosinase activity. Fluorescent light and blue light emitting diode (LED) irradiation were found to inhibit tyrosinase activity. In particular, tyrosinase activity was significantly inhibited under high intensity blue LED irradiation, suggesting that the activity of tyrosinase present in vegetables or fruits might be inhibited by LED irradiation. Therefore, blue LED irradiation during food storage and the distribution stage would be useful for ensuring good quality of food, owing to the inhibition of the enzymatic browning reaction.

Laser Intensity Dependence in Resonant Multiphoton Ionization of Hg Atoms (수은 원자에서의 공명 다광자 이온화 과정의 레이저 강도 의존성)

  • 한재민;정도영;차형기;김철중;이종민
    • Korean Journal of Optics and Photonics
    • /
    • v.1 no.1
    • /
    • pp.7-11
    • /
    • 1990
  • Resonant multi photon ionization (RMPD of Hg atoms is studied by focusing a high-power laser into the ionization cell. The intermediate resonant state is taken as $6d^1D_2$ with the 4-photon resonance wavelength of 560.7 nm. The ionization signal is measured as Hg vapor pressure (0.1-3.0 Torr), laser intensity $(10-120GW/\textrm{cm}^2)$, and laser wavelength (559-569 nm) vary. AC Stark shift and line broadening of the resonant state $(6d^1D_2)$ are observed and the shift factor is measured to be $-0.6(cm^{-1}/GW/\textrm{cm}^2$. It is also observed that the ionization signal increases as the Hg vapor pressure increases up to a certain value of pressure, however, if the pressure further increases, the signal decreases. The order of non-linearity, which discribes the laser intensity dependence of ionization rate, is measured to be 3 at the resonance, and compared with the theoretical results.esults.

  • PDF

PLC-Type WDM directional coupler and the effect of wavelength shift by UV irradiation (PLC형 WDM 방향성 결합기와 UV 조사에 의한 파장 천이 효과)

  • 한상필;박태상;최영복;강민정;김상인;박수진;정기태
    • Korean Journal of Optics and Photonics
    • /
    • v.11 no.1
    • /
    • pp.33-36
    • /
    • 2000
  • KrF excimer laser, which is useful for fabrication of fiber gratings, was irradiated on the PLC-type WDM directional coupler and the transmission wavelength shift was observed as a function of UV exposure time. The effective refractive index change of rectangular silica waveguide was calculated from the wavelength shift measurement and the coupled mode theory. heory.

  • PDF

2 파장 백색 OLED의 형광층 두께와 발광 특성

  • Jang, Ji-Geun;An, Jong-Myeong;Sin, Sang-Bae;Jang, Ho-Jeong;Ryu, Sang-Uk
    • Proceedings of the Korean Society Of Semiconductor Equipment Technology
    • /
    • 2007.06a
    • /
    • pp.34-38
    • /
    • 2007
  • 청, 황 2-파장 발광층의 구성에서 청색층으로 GDI602를, 황색층으로 GD1602:Rubrene(10%)를 사용하여 2-파장 백색 유기발광다이오드(WOLED)를 제작하고 이들의 특성을 분석하였다. 실험에서는 GDI602:Rubrene (10%)-황색층의 두께를 $220\{AA}$으로 일정하게 두고, GDI602-청색층의 두께를 달리하여 소자들을 제작하였다. 제작된 소자들의 발광 스펙트럼 특성으로는 GDI602 층의 두께에 따라 중심파장의 위치는 거의 일정하나 2-파장 사이의 상대적 세기가 변화되었으며, GDI602 층의 두께가 얇아질수록 황색파장의 상대적 세기가 강해지는 것을 볼 수 있었다. GDI602 층이 $60{\AA}$인 소자는 11V, $70{\AA}$인 소자는 9V, $80{\AA}$인 소자는 8V, $90{\AA}$인 소자는 7V 에서 순수 백색광(x=0.33, y=0.33)에 가까운 발광 특성을 나타내었다. 또한 GDI602 층의 두께에 따른 효율과 휘도는 백색발광 조건에서 각각 0.51m/W와 $3650cd/m^2(60{\AA})$, 0.61m/W와 $1050cd/m^2(70{\AA})$, 0.91m/W와 $490cd/m^2(80){\AA}$, 1.61m/W와 $250cd/m^2(90){\AA}$을 나타내었다.

  • PDF

Polarization of Stimulated Emission from Optically Pumped AIGaN/GaInN DH (AIGaN/GaInN DH의 광여기 유도방출광의 편광)

  • ;;H. Amano;I. Akasaki
    • Proceedings of the Materials Research Society of Korea Conference
    • /
    • 1994.11a
    • /
    • pp.98-98
    • /
    • 1994
  • 최근 청색반도체레이저의 실현을 위하여 ZnSe가 대표하는 II-Ⅵ족 화합물반도체와 Gan가 대표하는 III족 질화물반도체분야에서 집중적인 연구가 이루어지고 있으며, 아직까지 실용화 되지 않고 있는 청색반도체레이저의 출현에 대하여 많은관심이 모아지고 있다. III족 질화물반도체는 InM(Eg:1.9eV)부터 AIN(Eg: 6.2eV)에 이르기까지 전 조성영역에서 완전한 고용체를 이루며, 실온에서 직접천이형 에너지 대구조를 가지므로 청색 혹은 자외영역에서 동작하는 발광소자를 제작하는데 있어 유망시 되고 있는 소재이다. 특히 GaN와 InN의 3원흔정인 GaInN를 활성층으로 이용하면 그 발전파장을 370nm부터 650nm까지 즉 가시 전 영역으로부터 근 자외영역을 포함할 수 있게 된다. 이 연구에서는 AIGaN/GaInN 이중이종접합(DH) 구조의 고아여기에 의한 유도방출고아의 편광 특성을 조사하였다. 유기금속기상에피텍셜(MOVPE)법으로 성장한 AIGaN/GaInN DH 구조의 표면에 수직으로 펄스 발진 질소레이저(파장: 337.1cm, 주기 10Hz, 폭: 8nsec) 빔을 조사하고 DH구조의 단면으로부터의 유도방출광을 편광기를 통과 시킨 후 스펙트럼을 측정하였다. 입사고아 밀도가 증가함에 따라 약 402nm의 파장에서 유도발출에 의한 가도가 큰 피크가 나타났고, 그 반치폭은 약 18meV이었다. 실온에서 AIGaN/GaInN DH 구조로 부터의 유도방출에 필요한 입사광밀도의 임계치는 약 130㎾/$\textrm{cm}^2$이었다. 한편 편광각이 90$^{\circ}$일때는 발광스펙트럼의 강도가 매우 낮고 단지 자연방출에 의한 스펙트럼만이 나타났다. 편광각이 0$^{\circ}$일 때 최대의 방출광 강도를 나타내었으며, 편광각이 -90$^{\circ}$로 회전함에 따라 발고아강도의 강도가 감소하였다. 이와 같은 결과는 광여기에 의하여 AIGaN/GaInN DH 로 부터의 유도방출광이 GaInN활성층의 단면에 평행한 전기장의방향으로, 즉 TE모드로 선형적으로 편광됨을 의미한다. AIGaN/GanN DH 로 부터의 유도방출이 선형적으로 TE모드로 편광되는 것은 이 구조를 이용한 청색 및 자외선 반도체 레이저다이오드의 실현에 매우 유익한 것이다.

  • PDF

A Measurement and Analysis of Thermoluminescence Spectra of LaAlO3 (LaAlO3에 대한 열자극발광 스펙트럼의 광학적 분석)

  • Lee, J.I.;Moon, J.H.;Kim, D.H.
    • Journal of Korean Ophthalmic Optics Society
    • /
    • v.4 no.2
    • /
    • pp.141-146
    • /
    • 1999
  • We measured and analyzed thermoluminescence spectra of $LaAlO_3$, single crystal by 3 dimensional data for temperature, wavelength and luminescence intensity. $LaAlO_3$, has used as the substrates of YBCO(superconductor) or semiconductors. We could determined the energy of recombination center, that is impossible through analysis of glow curve data. We could obtained the energy through analysis of the spectrum data at peak temperature by Franck-Condon model. The total glow curve was deconvoluted to three glow curves by curve fitting method. The activation energies were 0.54eV, 0.91eV and 1.02eV respectively. The energies of recombination centers were determined with 2.04eV and 2.75eV from the analysis of luminescence intensity data for wavelength.

  • PDF

A Study of the Growth Characteristics of Starry Flounder Platichthys Stellatus in Accordance with the LED Wavelength (LED 파장에 따른 강도다리 Platichthys Stellatus 성장특성)

  • Jang, Jun-Chul;Her, In-Sung;Lee, Se-Il;Yu, Young-Moon
    • Journal of Advanced Marine Engineering and Technology
    • /
    • v.39 no.4
    • /
    • pp.495-500
    • /
    • 2015
  • Currently the fish aquaculture industry of Korea is focused on the mass culture of flatfish (Paralichthys olivaceus) and and rockfish (Sebastes schlegeli) with completely controlled culture techniques. Recently, there has been considerable interest in new species development, such as the starry flounder (Platichthys stellatus). The value of starry flounder (Platichthys stellatus) as a raw fish increases with time because it is tasty, light, and bouncy. In this paper, the growth characteristics dependent on the LED wavelengths and the optimal growth conditions of the starry flounder were studied. In these experiments 4 different kinds of LED lighting, configurations were designed and prepared using red, green, blue and white, respectively. The fish aquaculture experiments were conducted over 10 weeks in four fish tanks, each installed with a different color of LED lighting. 10 starry flounders of 13 ~ 17g were placed into each tank. The effects of each color of light on the growth rate of the starry flounders were then examined. As a result, the starry flounders under the green LED lighting showed the highest growth rate, followed by the white, red, and blue LED lighting. Based on these results, a green light provides a suitable breeding environment for the starry flounder.

Spectral Infrared Signature Analysis of the Aircraft Exhaust Plume (항공기 배기 플룸의 파장별 IR 신호 해석)

  • Gu, Bonchan;Baek, Seung Wook;Yi, Kyung Joo;Kim, Man Young;Kim, Won Cheol
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.42 no.8
    • /
    • pp.640-647
    • /
    • 2014
  • Infrared signature of aircraft exhaust plume is the critical factor for aircraft survivability. To improve the military aircraft survivability, the accurate prediction of infrared signature for the propulsion system is needed. The numerical analysis of thermal fluid field for nozzle inflow, free stream flow, and plume region is conducted by using the in-house code. Weighted Sum of Gray Gases Model based on Narrow Band with regrouping is adopted to calculate the spectral infrared signature emitted from aircraft exhaust plume. The accuracy and reliability of the developed code are validated in the one-dimensional band model. It is found that the infrared radiant intensity is relatively more strong in the plume through the analysis, the results show the different characteristic of the spectral infrared signature along the temperature, the partial pressure, and the species distribution. The continuous spectral radiant intensity is shown near the nozzle exit due to the emission from the nozzle wall.

InGaN/GaN LED 구조의 Bowing 및 광전특성 개선 연구

  • Lee, Gwan-Jae;Kim, Jin-Su;Lee, Cheol-Ro;Lee, Jin-Hong;Im, Jae-Yeong
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2015.08a
    • /
    • pp.192.2-192.2
    • /
    • 2015
  • 본 논문에서는 사파이어 기판 표면에 레이저 처리를 통해 격자 구조(레이저 격자 구조)를 제작하고 InGaN/GaN 발광다이오드(Light-Emitting Diodes, LED) 박막을 성장 한 시료에서 Bowing 특성 변화를 논의한다. 그리고 Bowing 정도에 따른 InGaN/GaN LED의 광학 및 전기적 특성을 Photoluminescence (PL)와 Electroluminescence (EL) Mapping 법을 이용하여 상호 비교 분석하였다. 2-인치 사파이어 기판 상에 레이저 격자 구조의 간격은 1 mm (GS1-LED), 2 mm (GS2-LED), 3 mm (GS3-LED) 로 제작하였으며, 격자 구조가 없는 LED를 기준 시료(C-LED)로 사용하였다. GS1-LED, GS2-LED, GS3-LED의 Bowing 정도는 C-LED 대비 각각 8%, 7.6%, 6.4% 감소하였다. PL Mapping 결과, GS-LED의 발광 파장의 분포 균일도가 C-LED 보다 개선되는 것을 확인하였고, 파장이 C-LED 대비 단파장으로 이동하였다. 또한, GS-LED시료의 PL 강도는 C-LED보다 증가하였고, 특히 GS2-LED의 PL 강도는 C-LED 대비 6.9% 증가 하였다. EL mapping 결과, GS-LED 발광 파장의 분포 균일도는 PL 결과와 유사하게 측정되었으며, 2인치 기판 전체 면적에 대한 GS-LED의 주요 동작전압 및 출력 전력 수율이 C-LED대비 현저히 개선되었다. 사파이어 기판 표면에 제작한 레이저 격자 구조에 따른 InGaN/GaN LED의 광학적, 전기적 특성을 Bowing의 개선과 응력 완화 현상으로 논의 할 예정이다.

  • PDF