• The Journal of Korean Association of Computer Education
• /
• v.9 no.1
• /
• pp.97-106
• /
• 2006

In the next-generation Internet backbone network, DWDM technology was appeared as an alternative to solve circuit shortage of existing TDM-based Internet. In this DWDM Network, it is inevitable to consider wavelength-conversion function as well as RWA in case of setting up connection for the efficient use of resources and customer satisfaction. This study is to describe an efficient strategy for the wavelength-conversion function with a limited range and for the use of a wavelength converter with the selected node, and to verify the optimum use of a wavelength converter through the performance test.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.07a
• /
• pp.16-17
• /
• 2003

지난 수년간 인터넷 보급에 따른 급격한 통신량 증가에 따른 요구는 차세대 통신 기술인 WDM을 구축하게 되었고 이에 따라 WDM 라우팅 기술과 스위칭 기술이 절실히 필요로 하게 되었다. WDM에 있어서 다른 경로나 목적지로 신호를 보내기 위해서는 신호의 파장이 변환 되어야 하므로 신호의 파장변환은 라우팅에 있어 핵심적인 기술 중 하나로 인식되어지고 있다 현재 사용되어지고 있는 전광 파장 변환기는 주로 SOA (Semiconductor Optical Amplifier)의 비선형 특성인 XGM, XPM, FWM등을 이용한 것으로서 편광 민감성, ASE에 의한 SNR 감소, 신호크기 변형과 높은 가격으로 인해 안정적인 파장변환기로 쓰기에는 다소 무리가 있다. (중략)

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.7 s.337
• /
• pp.13-20
• /
• 2005

We propose an erbium-doped fiber ring laser whose multi-wavelength oscillation is tunable and switchable by tuning fiber bragg gratings. By applying axial pressure on the fiber bragg grating, the wavelength spacing of the proposed laser can be tuned continuously. And by adjusting a polarization controller(PC), the proposed laser can be switched among dual-, triple- and four-wavelength lasing operations.

• Korean Journal of Optics and Photonics
• /
• v.16 no.4
• /
• pp.392-396
• /
• 2005

A new structure of tunable wavelength converter based on XCM in SOA was tried and analyzed. This converter used single SOA and had very simple structure. In this paper, results were experimentally obtained and demonstrated. Pump signal was generated with NRZ $(PRBS\;2^{31}-1)$ and data rate 2.5 Gbps. WDM multi conveted signals showed more than 8.3 dB extinction ratio. For BER performance, all these converted signals had within 5.0 dB power penalty compared with the pump signal. With these results, we showed that this converter was suitable for 2.5 Gbps WDM multi-channel wavelength converting.

• Korean Journal of Optics and Photonics
• /
• v.14 no.4
• /
• pp.454-459
• /
• 2003

We report the first demonstration of 10 Gb/s wavelength conversion in a Mach-Zehnder interferometric wavelength converter monolithically integrated with a loss-coupled DFB probe source. The integrated device is fabricated using a BRS (buried ridge stripe) structure with an undoped InP clad layer on the top of a passive waveguide to reduce high propagation loss. The device exhibited a static extinction ratio of 11 dB. Good performance at 10 Gb/s is obtained with an extinction ratio of 7 dB and a power penalty of 2.8 dB at a 10$^{-9}$ bit error rate.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.2
• /
• pp.81-89
• /
• 1999

Among various wavelength conversion technologies, that using the cross-gain modulation in laser diode makes it possible to deal with the high speed signal quite simply and efficiently. In this paper, presented was the applicability of an improved time-domain large-signal dynamic model as a CAD tool to analyzed the characteristics of SSGDBR(Superstructure Grating Distributed Bragg Reflector) laser diodes used for wavelength converters. Using this model, it was shown that this kind of wavelength converter can provide the widely tunable wavelength conversion of the high speed data above 10 Gbps. We also investigated the effect of input optical power and the bias current on the characteristics of the device such as extinction ration and eye diagram. The modeling results show very similar trend to the experimental reports.

• Korean Journal of Optics and Photonics
• /
• v.14 no.5
• /
• pp.509-514
• /
• 2003

Mach-Zehnder interferometric wavelength converters with monolithically integrated semiconductor optical amplifiers (SOA's) have been fabricated and characteristics of wavelength conversion at 10 Gb/s have been investigated for wavelength span of 40 nm. The devices have been achieved by using a butt-joint combination of buried ridge structure type SOA's and passive waveguides. In the integration, a new method has been applied that removes p+InP cladding layer leading to high propagation loss and forms simultaneously the current blocking and the cladding layer using undoped InP. The module packaging has been achieved by using a titled fiber array for effective coupling into the tilted waveguide in the wavelength converter. Using the module, wavelength conversion with power penalty lower than 1 ㏈ at 10 Gb/s has been demonstrated for wavelength span of 40 nm. In addition, it is show that the module can provide 2R (re-amplification, re-shaping) operation by demonstrating the conversion with the negative penalty.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.2
• /
• pp.86-94
• /
• 2014

Optical packet switching (OPS) is being considered as one of the switching technologies for a future optical internet. For contention resolution in an optical packet switching (OPS) system, the wavelength dimension is generally used in combination with a fiber delay line (FDL) buffer. In this article, we propose a method to reduce the number of tunable wavelength converters (TWCs) by sharing TWCs for a cost-effective design of an asynchronous OPS system with a shared or an output FDL buffer. Asynchronous and variable-length packets are considered in the OPS system design. To investigate the number of TWCs needed for the OPS system, an algorithm is proposed, which searches for an available TWC and an unused internal wavelength, as well as an outgoing channel. This algorithm is applied to an OPS system with a shared or an output FDL buffer. Also, the number of internal wavelengths (i.e., the conversion range of the TWC) needed for an asynchronous OPS system is presented for cost reduction of the OPS system.

• Proceedings of the Optical Society of Korea Conference
• /
• 2001.02a
• /
• pp.166-167
• /
• 2001

과장 변환기는 WDM (wavelength division multiplexing) 시스템에서 wavelength relocation을 가능하게 하여 시스템의 유연성과 효율성을 향상시킨다는 측면에서 매우 중요한 기능을 갖는다. WDM 시스템의 채널의 수가 점차 증가함에 따라 채널의 간격이 100 GHz에 이르고 있으며 향후 더욱 조밀해 질것이다. 이러한 DWDM (Dense WDM)시스템에서 사용될 수 있는 파장변환기는 100 GHz단위의 파장변환 기능과 광대역 가변 변위가 필수적이다. (중략)

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.08a
• /
• pp.30-31
• /
• 2000

파장 분할 다중 방식을 사용하는 모든 전광 통신망은 파장 재사용과 routing를 위해 반드시 파장 변환기를 필요로 한다. 본 논문에서는 반도체 광 증폭기와 반도체 레이저를 수평 결합시킨 새로운 구조를 제안함으로써 기존의 파장 변환기가 가졌던 문제점들을[1][2][3] 해결하고자 한다. 두개의 모드가 약하게 결합되었을 때는 그 파의 크기나 전파상수는 서로 영향을 미치게 된다. 예를 들면 수평결합 파장가변 LD[4]나 방향성 결합 파장 변환기[5]는 이 특성을 이용한 소자이다. 본 논문에서 제안된 소자도 이러한 결합모드 특성을 이용하였다. (중략)