• 한국정보통신학회논문지
• /
• 제6권7호
• /
• pp.1095-1099
• /
• 2002

본 논문은 1064 m의 Q-스위칭 Nd:YAG로 펌핑된 단일통과 라만레이저에서 nano-초의 스토크스 펄스발생에 관한 연구이며, 라만 매질로는 GeO2로 도핑된 grad index형 다중모드 파이버 220 m를 사용하였다. 실험 결과에서 펌핑 에너지의 변화에 따라 1.5∼2.7 nano 초의 펄스폭을 갖는 스토크스 펄스 트래인 싱분이 효율적으로 발생함을 알 수 있었다.

• Journal of Welding and Joining
• /
• 제34권5호
• /
• pp.6-12
• /
• 2016

This study was performed bead welding of pure titanium by using fiber laser. Since titanium is very sensitive to oxidation and nitriding during welding, it is important to compose the shielding equipment compared with different material. Thus side and coaxial shield nozzle, rail and chamber type shielding equipment are widely used to protect effectively the weld during welding. Experiments were performed by changing nozzle angle and distance using side and coaxial shield nozzle. The bead colors of gold, brown, blue, purple and yellowish white were obtained by changing variables of shield nozzle, and then its weldability was investigated. As experiment result, sound and not brominated beads were formed when side nozzle angle and distance were respectively $45^{\circ}$ and 10 mm.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 E
• /
• pp.2207-2208
• /
• 1999

In this paper, we would like to study the oscillation characteristics of single mode fiber laser which is composed of a Fabry-Perot resonator, a pump source of 808nm Laser Diode, a $Er^{3+}$ doped single mode fiber with 0.5um diameter.

• Journal of Welding and Joining
• /
• 제31권4호
• /
• pp.28-33
• /
• 2013

The effects of laser welding beam quality is very large. However, not an analysing case was found for the difference on the plasma emission signal during laser welding according to the beam quality. Therefore, in this study, we compared and evaluated penetration and signal change according to the beam quality at the a similar wavelength band by using a fiber laser and Nd:YAG laser. In addition, we took high speed videography in order to make sure that FFT analysis reflects the actual motion period of keyhole and found the period of video analysis and FFT mostly matched. As a result, it is expected to secure higher reliability than evaluating signal intensity when appling FFT to monitoring.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2002년도 춘계종합학술대회
• /
• pp.271-274
• /
• 2002

본 논문에서는 광센서용 광원에 적합한 1.55$\mu\textrm{m}$ 파장대의 InGaAsP/InP 반도체레이저를 제작하였다. 레이징을 억제시켜주기 위해서 bending type의 소자를 설계 및 제작하였으며, 제작된 소자의 출력은 펄스 구동전류 100㎃에서 1.6㎽이고, 스펙트럼 폭은 40nm의 값을 가졌다. 그리고, 제작된 광원을 적용하였을 때 광섬유 자이로스코프에 파이버 종단에서의 출력은 $25^{\circ}C$, 직류 100㎃에서 540㎻였고, 스펙트럼 폭은 53nm였다. 그리고, 불규칙잡음 계수는 2.5$\times$10­$^3$deg/√hr였고, 자이로 출력 drift도 잡음수준으로 조사되었다. 따라서, 본 연구에서 제작한 광원을 광섬유 자이로 스코프에 사용 가능함을 확인하였다.

• Journal of Welding and Joining
• /
• 제32권6호
• /
• pp.64-69
• /
• 2014

The applications by using fiber laser have increased recently. However, due to high beam quality of fiber laser, it is inappropriate to apply the existing laser welding monitoring technology to the fiber laser welding as it is. On this study, thus, we analyzed emission signal with RMS and FFT for the in-process monitoring during fiber laser welding. 12mm-thick 304L stainless steel sheet was used in fiber laser welding and the result showed as follows: The intensity changes in RMS did not clarify the distinction between full penetration and partial penetration. However, as welding speed increases, specific frequency also increases in regards of frequency analysis by using FFT.

• Journal of Welding and Joining
• /
• 제32권6호
• /
• pp.56-63
• /
• 2014

To develop and understand dissimilar metals joining of Stainless steel and Copper, ultra-high speed laser lap welding was studied using single mode fiber laser in this study. SUS304 and Cu have large differences in materials properties, and Cu and Fe have no intermetallic compounds by typical binary phase of Cu and Fe system. In this study, ultra-high speed lap welds of SUS304 and Cu dissimilar metals using single-mode fiber laser was generated, and weldability of the weld fusion zone was evaluated using a tensile shear test. To understand the phenomenon of tensile shear load, weld fusion zone of interface weld area and fracture parts after tensile shear test were observed using scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDX) analysis system. And it was confirmed that Cu was easily melting and penetrating in the grain boundaries of SUS304 because of low melting temperature. And high thermal conductivity of copper occurred dissipate heat energy rapidly. These properties cause the solidification cracking in weld zone.

• Journal of Welding and Joining
• /
• 제32권6호
• /
• pp.70-74
• /
• 2014

On this study, we researched the in-process monitoring during fiber laser welding as well as on the first paper. On the previous/formal study, we analyzed the change of emission signal on thin plate welding. On this study, however, we analyzed RMS and FFT with emission signals in laser welding on lap joint and butt joint of 8mm-thick 316L stainless steel. As the result, the movement of specific frequency peak was observed according to welding speed changes. Furthermore, frequency peak as a result of FFT on the thick plate welding are much clearer than on the thin plate welding. Therefore, it is expected that the welding parameter changes can be predicted in case of applying FFT to in-process monitoring.

• 한국전자파학회지:전자파기술
• /
• 제4권3호
• /
• pp.18-29
• /
• 1993

장거리 초고속 단일모드 광파이버 전송 시스템에서, 색분산은 복조된 파형의 찌그러짐을 생기게 하며, 그 결과 수신된 신호 간 간섭을 일으켜 전송 시스템의 성능을 저하시킨다. 본 논문에서는 강도변조-직접검파 시스 댐의 색분산제한을위상변조에서 진폭변조로의 전환잡음의 영향을고려함으로서 연구하였다. 파이버 색분산에 의한 위상-진폭으로의 전환잡음을 잡음전력 스펙트럼 밀도를 유도함으로서 분석하였으며 위상-진폭 전환잡음을 피하기 위한 시스댐 전력손실과 레이저 선폭에 대한 요구조건을 수치해석을 통하여 구하였다.

• Journal of Welding and Joining
• /
• 제32권3호
• /
• pp.81-88
• /
• 2014

As the industrial technology has been developed, a dissimilar welding has been received huge attention in various engineering fields. To understand the mechanical properties and possibility of applications of dissimilar metals joining, the laser welding of Cu and Ni dissimilar metals was studied in this paper. Cu and Ni have differences in materials properties, and Cu and Ni make no intermetallic compounds according to typical binary phase of Cu and Ni system. In this study, lap welds of Cu and Ni dissimilar metals using single-mode fiber laser with high welding speed were tried, and mechanical properties of the welds zone were evaluated using a Vickers hardness test and a tensile shear test. To recognize the relation between hardness and tensile shear load, weld fusion zone of interface weld area were observed. And it was confirmed that the ultra-high welding speed could make good weld beads and higher hardness parts had higher tensile shear load under the all conditions.