• Journal of the Korean Society of Systems Engineering
• /
• v.13 no.2
• /
• pp.34-41
• /
• 2017

The Pyro project, one of the large national R&D project to construct Korea Advanced Pyroprocessing Facility (KAPF), which has many goals such as development of pyro technology and process equipment, design of equipment and facility, construction, and test operation, is now under research and development. To reduce uncertainty and risk of such complex project, the technical management processes in systems engineering standards and NASA handbook were reviewed, and then the ten common technical management processes were selected for the large national R&D project to meet its goal successfully. And the essential technical management processes were finally suggested for Pyro project in consideration of current situation of the project.

• Journal of Korea Technology Innovation Society
• /
• v.12 no.1
• /
• pp.237-264
• /
• 2009

Many Korean companies wanted to improve technological competitiveness and business performance radically through technology leadership initiatives. In-depth case studies about successful Korean technological innovation in the technology generation stage have potential to minimize Korea and developing country firms' trial and error when they are pursuing new technological innovation in the technology generation stage. There are few studies about developing country firms' technological innovations in the technology generation stage and especially process innovation studies are far less performed compared to product innovation studies. This is an exploratory study of POSCO's FINEX process technology innovation in the technology generation stage. These are my findings from this study. Firstly, leadership innovation in the technology generation stage is not a continuous development of catch-up innovation in the technology internalization stage and only top managements can initiate highly risky leadership innovation. Secondly, developing country firms which lacked in technological capability overcomes difficulties in the early stage through complementary technological collaboration with R&D first-movers. Thirdly, this company become a technology leader in spite of late entry in technology development race with developed country firms through rapid scale-ups.

• Journal of Intelligence and Information Systems
• /
• v.29 no.1
• /
• pp.265-288
• /
• 2023

Process mining has generally analyzed the default logs of Information Systems such as SAP ERP, but as the use of automation software called RPA expands, the logs by RPA bots can be utilized. In this study, the actual status of RPA automation in the field was identified by applying RPA bots to the work of three domestic manufacturing companies (cosmetic field) and analyzing them after leaving logs. Using Uipath and Python, we implemented RPA bots and wrote logs. We used Disco, a software dedicated to process mining to analyze the bot logs. As a result of log analysis in two aspects of bot utilization and performance through process mining, improvement requirements were found. In particular, we found that there was a point of improvement in all cases in that the utilization of the bot and errors or exceptions were found in many cases of process. Our approach is very scientific and empirical in that it analyzes the automation status and performance of bots using data rather than existing qualitative methods such as surveys or interviews. Furthermore, our study will be a meaningful basic step for bot behavior optimization, and can be seen as the foundation for ultimately performing process management.

• Proceedings of the KAIS Fall Conference
• /
• 2005.05a
• /
• pp.132-135
• /
• 2005

본 연구에서는 반도체 제조 공정에 이용되는 가스의 흐름을 감지하고 제어하는 장치를 제안하였다 압력센서를 MFC(Mass Flow Controller)에 의해 제어되는 다음 단의 파이널밸브(Final Valve)와 챔버사이의 가스관에 부착시켜, 이 압력센서의 신호와 공압밸브의 동작 신호를 디지털 회로를 이용하여 실시간으로 제어하도록 하였다. 이로써 반도체 제조 공정 중에 발생할 수 있는 2차 소성물로 인한 가스의 흐름 제어와 관련된 시스템 고장을 LED를 통해 실시간으로 확인 가능하다. 또한 가스누출고장발생 시 반도체 제조 공정의 프로세스를 중단시켜 장비의 손상 및 안전사고를 예방하는 기능도 있다. 본 연구에서 개발된 모듈을 이용함으로써 가스밸브의 오동작에 의한 반도체/디스플레이 제조장비의 신뢰성 향상을 기할 수 있다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2021.11a
• /
• pp.177-180
• /
• 2021

코로나바이러스로 인하여 전 세계는 어려움을 겪고 있으며, 바이러스를 확산을 막기 위해서 실외에서는 마스크를 쓰는 것이 일상이 되었다. 하지만, 이를 따르지 않는 사람이 일반 시설에 방문할 때 이를 감지하고 경고를 할 수 있는 시스템이 없어, 마스크 미 착용자로 인한 위험성 방지에 취약점을 가지고 있다. 본 연구에서는 OpenCV 라이브러리를 이용한 마스크 착용 여부를 확인하는 시스템을 설계한다. Haar 특징기반 다단계 분류자를 이용하여 마스크 인식 프로세스를 설계하였으며, 마스크 착용 확인 시스템은 경량 컴퓨터인 라즈베리파이 장치 위에 구현하였다. 또한 확인된 사람의 이미지는 클라우드 시스템에 저장할 수 있도록 구현하였다. 본 연구를 통해, 누구나 손쉽게 해당 마스크 착용 확인 시스템을 중소 매장에 설치하여 사용할 수 있으며, 코로나바이러스 확산 방지에 기여할 수 있다고 예상한다.

• Journal of the Korea Convergence Society
• /
• v.10 no.1
• /
• pp.45-51
• /
• 2019

The use of the Internet of things plays a major role in the Fourth Industrial Revolution, and a series of tasks of accumulating, converging, analyzing and reusing various data and services becomes very important. Because the pace and scope if the paradigm shift in Fourth Industrial Revolution is so rapid and unpredictable, the development and utilization of a system to fulfill this role for IOT are urgently required. In this paper, we introduce the Web-based IOT management system, which connects the IOT with OKMindmap, which is a domestic open source software and service, and the Node-RED service. This system combines the advantages of OKMindmap with the advantages of Node-RED, which is capable of visual component based programming, so that it can easily and flexibly connect the IOT based on Web browsers, and various data and services can be integrated and linked. We developed a camera module, a temperature and humidity sensor module, and the motor control module in Raspberry PI basically, and tested the operation successfully. We plan to extend the IOT component gradually by using Arduino and System On Chip.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.11 no.1
• /
• pp.69-75
• /
• 2013

The recovery of Zr from Zircaloy-4 (Zry-4) cladding hulls was demonstrated to investigate the effect of the oxidation process on the reaction rate of the chlorination reaction. In chlorination reaction experiments performed for 6 h, where reaction products were collected every 2 h, it was observed that a significant decrease in the reaction rate was caused by the oxidation process ($500^{\circ}C$, 10 h under an air atmosphere) within the reaction period of 0 - 2 h. The amount of reaction residue increased from 0.95 to 1.65wt% of initial weights in the fresh and Zry-500-10 (Zry-4 hulls oxidized at $500^{\circ}C$ for 10 h under an air atmosphere) hulls, respectively. The purity of the recovered Zr was identical at 99.61wt% for the fresh Zry-4 and Zry-500-10 hulls. Quantitative analysis of the chlorination reaction rate was performed by varying the reaction time from 0.5 to 1.0, 2.0, and 4.0 h. The fitting results showed that the relationship between weight loss and reaction time can be interpreted by a linear line with a slope of 23.35wt%/h for the fresh Zry-4 case, while two linear lines were necessary to fit the results of Zry-500-10. In addition, the slope values were 17.12 and 27.16wt%/h for (0 - 20) and (20 - 100)wt% loss regions, respectively.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.11 no.1
• /
• pp.55-61
• /
• 2013

The recovery of Zr from Zircaloy-4 (Zry-4) cladding hulls using a chlorination method was demonstrated for complete conversion of Zr into $ZrCl_4$. A chlorination reaction was performed by reacting Zry-4 hulls for 8 h under a 70 cc/min $Cl_2$ + 70 cc/min Ar flow at $380^{\circ}C$. The initial weight of the reactant (51.7 g) decreased to 0.49 g after 8 h of operation, which is only 0.95wt% of the initial weight. The weight of the total reaction products was 121.7 g with a high Zr purity of 99.80wt%. Fe and Sn were identified as major (0.18wt%) and minor (0.02wt%) impurities of the reaction products, respectively. It was also shown that Zr exhibited a high recovery ratio of 96.95wt% with a relatively small experimental loss of 2.34wt%. Observation of the reaction residues revealed that the chlorination reaction was dominant along the longitudinal direction, and surface oxide layers remained as reaction residues. The high purity and recovery ratio of Zr proposed the feasibility of the chlorination technique as an effective hull waste treatment method.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.7 no.4
• /
• pp.213-218
• /
• 2009

Electrowinning process recovers uranium with actinide elements from spent fuels and is a key step in the Pyroprocessing because of proliferation resistance. An analysis of heat transfer of the Electrowinning cell was conducted to develop basic tool for designing engineering-scale Electrowinner. For the calculation of the heat transfer, ANSYS CFX commercial code was adapted. As a result of the calculation, the vertical Heating Zone length had great effect upon temperature of LiCl-KCl eutectic salt. To maintain constant temperature in the salt, the Heating Zone length should be three times longer than the height of the salt. However, the argon and salt temperatures were barely affected by the Cooling Zone length. The temperature under the Cell cover was mainly influenced by the number of the cooling plates. When the cooling plates were installed more than the number of 5, temperature under the cover was maintained below $250^{\circ}C$. These temperature properties had similar tendency toward the temperature of the Cell which was measured from experiments, Simulated heat transfer information from this study could be used to design engineering-scale Electrowinner.

• Journal of the Korea Institute of Building Construction
• /
• v.22 no.2
• /
• pp.171-182
• /
• 2022

The regular assessment of a building is important to understand structural safety and latent risk in the early stages of building life cycle. However, methods of traditional assessment are subjective, atypical, labor-intensive, and time-consuming and as such the reliability of these results has been questioned. This study proposed a method to bring accurate results using a 3D laser scanner and integrate them in Building Information Modeling (BIM) to visualize defective condition. The specific process for this study was as follows: (1) semi-automated data acquisition using 3D laser scanner and python script, (2) scan-to-BIM process, (3) integrating and visualizing defective conditions data using dynamo. The method proposed in this study improved efficiency and productivity in a building assessment through omitting the additional process of measurement and documentation. The visualized 3D model allows building facility managers to make more effective decisions. Ultimately, this is expected to improve the efficiency of building maintenance works.