• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2013.06a
• /
• pp.151-154
• /
• 2013

본 논문에서는 전관방송 시스템에 사용되는 전관방송용 파워앰프에 대해 TTA에서 개발한 시험규격을 설명하고, 주요 시험항목에 대해 출력 레벨에 따라 어떠한 특성이 나타나는지 시험 결과를 분석하였다. 시험을 위해 현재 상용으로 판매되는 정격출력이 260 W, 360 W, 480 W, 600 W 인 앰프를 사용하였고, 각각의 앰프에 대해 정격출력, 1/2 정격, 1/4 정격, 1/8 정격, 10W, 1W 일 때 주파수 응답, 신호대잡음비, THD+N 비를 측정하여 비교하였다. 향후 본 논문의 시험 데이타가 전관방송용 앰프의 성능을 가늠할 때 중요 지표가 될 것으로 기대한다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.7
• /
• pp.44-51
• /
• 2008

A stereo audio digital-to-analog converter (DAC) with a power amplifier using asymmetric pulse-width modulation (PWM) is presented. To adopt class-D amplifier mainly used in high-power audio appliances for head-phones application, this work analyzes the noise caused by the inter-channel interference during the integration and optimizes the design of the sigma-delta modulator to decrease the performance degradation caused by the noise. The asymmetric PWM is implemented to reduce switching noise and power loss generated from the power amplifier. This proposed architecture is fabricated in 0.13-mm CMOS technology. The proposed audio DAC including the power amplifier with single-ended output achieves a dynamic range (DR) of 95-dB dissipating 4.4-mW.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2000.11a
• /
• pp.167-170
• /
• 2000

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.10 s.352
• /
• pp.118-125
• /
• 2006

A new error amplifier is presented for fast transient response of DC-DC converters. The amplifier has low quiescent current to achieve high power conversion efficiency, but it can supply sufficient current during large signal operation. Two comparators detect large-signal variations, and turn on extra current supplier if necessary. The amount of extra current is well controlled, so that the system stability can be guaranteed in various operating conditions. The simulation results show that the new error amplifier achieves significant improvement in transient response than the conventional one.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2010.10a
• /
• pp.517-518
• /
• 2010

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.04a
• /
• pp.281-282
• /
• 2011

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.10a
• /
• pp.78-79
• /
• 2011

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.22 no.2
• /
• pp.170-178
• /
• 2012

This paper is concerned with the development of power amplifier and controller for piezoelectric actuator and sensor used in smart structures. Even though a high-voltage power amplifier is provided in the form of an operational amplifier, a very high DC voltage is still necessary as a power supply. In this study, we propose a low-cost design for the power amplifier including the DC power supply. We also need a controller on which a control algorithm will be mounted. In general, a digital signal processing chip is popularly used because of high speed. However, only commercial product is available for smart structure applications. In this paper, a controller consisting of a DSP and electronic circuits suitable for piezoelectric sensor and actuator pair is proposed. To validate the proposed controller with power amplifier, experiment on smart structure was carried out. The experimental results show that the proposed control system can be effectively used for smart structure applications with low cost.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.3
• /
• pp.241-246
• /
• 2021

Modern loudspeaker systems are changing an active loudspeaker system that have multiple input channels and power amplifier. So, we cannot measure these active loudspeakers with IEC 60268-5 standard. This paper introduces an IEC 60268-21 standard that can measure an active loudspeaker having many analog and digital and wireless or wired inputs and having various control parameters.

• Proceedings of the KIEE Conference
• /
• 2002.04a
• /
• pp.9-11
• /
• 2002

본 논문에서는 고속 회전기의 자기 베어링을 위한 새로운 파인 앰프(Power Amplifier) 구성 방법에 대하여 논하고자 한다. 그리고 이를 위한 새로운 PWM 구현 방법을 제안한다. 제안된 방법은 6개의 IGBT로 구성된 3개의 암(Arm)을 내장한 파워 모듈(Power Module)을 이용한다. 제안된 방법을 통해 필요한 파워 모듈의 숫자를 줄이면서도 자기 베어링 코일에 효과적으로 전압을 인가할 수 있음을 보인다. 또한 자기 베어링 1자유도 모의 실험 장치를 구성하여 제안된 방법의 실효성을 검증한다.