• Communications for Statistical Applications and Methods
• /
• v.15 no.2
• /
• pp.293-302
• /
• 2008

In this paper we propose a new feature, average power, for speech segments extraction with hidden Markov models, which is based on mel frequencies of speech signals. The average power is compared with the mel frequency cepstral coefficients, MFCC, and the power coefficient. To compare performances of three types of features, speech data are collected for words with explosives which are generally known hard to be detected. Experiments show that the average power is more accurate and efficient than MFCC and the power coefficient for speech segments extraction in environments with various levels of noise.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.6
• /
• pp.1191-1198
• /
• 2018

The wind profiler radar provides a standing profile of the wind vector and the atmospheric physical signal for the fixed point. Since the wind vector is calculated by the manufacturer's data processing program, the quality control of the date is limited. Therefore, understanding and exploiting the raw spectrum data need to improve the quality of the wind vector. The raw data of the wind vector is the power spectral density stored in binary form. In this study, an algorithm was completed to transform the raw data into the real spectral density, and the use of raw data was evaluated by retrieving zero-order and first-order moments of the spectral based on the spectrum quality control.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.22 no.7
• /
• pp.692-700
• /
• 2012

Vibration intensity has been used to localize vibration source of a vibrating system. Not only that, vibration intensity has also been used for structural diagnostic in identifying crack and mounted stiffeners. To clearly identify the location of vibration source and understand the changes of energy transmission path, clear flow visualization is required. Most of previous works used vectors to indicate the magnitude and direction of emerging vibration energy and transmission paths. However, due to the large surface area of a plate like-structure, clear transmission paths cannot be achieved using vector visualization. This becomes an issue when detail vector flow at all locations of the whole plate surface is required. In this study, streamlines visualization is used to clearly indicate the power flow transmission path at all plate surface. By using streamlines representation, not only clear transmission paths are obtained, but also improves the vector visualization which helps us to understand the changes of the energy flow especially for stiffened plates. In this study, vibration intensity computation is firstly compared to previous work to validate the vibration intensity computation. To clearly show the power flow transmission paths, streamlines representation is shown. This representation overcomes the unclear vector direction especially for stiffened plates. Different pattern of energy transmission path can be observed using streamlines representation for stiffened and unstiffened plate. The complex streamlines pattern can also be observed at high resonance frequencies which is unclear by using vector representation.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.22 no.8
• /
• pp.777-783
• /
• 2012

Vibration intensity has been used to identify the location of a vibration source in a vibrating system. By using vectors representation, the source of the power flow and the vibration energy transmission paths can be revealed. However, due to the large surface area of a plate-like structure, clear transmission paths cannot be achieved using the vectors representation. Experimentally, for a large surface object, the number of measured points will also be increased. This requires a lot of time for measurement. In this study, streamlines representation is used to clearly indicate the power flow transmission paths at all surface plate for FEM and experiment. To clearly improve the vibration intensity transmission paths, streamlines representation from experimental works and FEM computations are compared. Improved transmission paths visualization for both FEM and experiment are shown in comparison to conventional vectors representation. These streamlines visualization is useful to clearly identify vibration source and detail energy transmission paths especially for large surface plate-like structures. Not only that, this visualization does not need many measured point either for experiment or FEM analysis.

• Proceedings of the KIPE Conference
• /
• 1998.07a
• /
• pp.357-360
• /
• 1998

본 논문에서는 TI(Texas Instruments)사의 DSP칩 TMS320F240을 이용한 벡터드라이브 설계를 한다. TMS320F240은 서보모터드 라이브에 적합하게 상품화 된 칩으로 산업용 로봇제어에 필요한 대부분의 주변회로를 포함하고 있다. 이를 이용해서 제어기를 구성하면 적은 비용으로 신뢰성 높은 제어기를 구성할 수 있다. 드라이브는 크게 제어회로부와 파워회로부로 나누어서 설계했으며, AC서보모터에 벡터제어로 실제적용을 했다.

• Proceedings of the KIPE Conference
• /
• 2003.07b
• /
• pp.648-653
• /
• 2003

영벡터로 V(000)이 적용된 종전의 2상 RCD-PWM(Random Centered Distribution PWM)은 변조지수 M이 1에 가까울수록, 모터 전압 및 전류 스펙트럼의 광대역화 효과가 증가되지 않는 단점이 있다. 본 연구에서는 M에 따라서 영벡터를 선택하는 2상 MZRCD(Multi-Zero Vectors RCD)기법을 제안하였다. 2상 MZRCD기법은 M이 0.7보다 크게되면 영벡터로 V(111)을 선택하고, 작은 경우에는 V(000)을 선택하여, M의 전 영역에 걸쳐서 스펙트럼의 광대역화를 이룰 수 있는 방법이다. 본 연구의 타당성을 입증하기 위하여 Matlab simulink에 의하여 시뮬레이션을 수행하였다. M의 변화에 따른 모터 전압 및 전류의 스펙트럼을 검토하였으며, M과 무관하게 모터 전압 및 전류 스펙트럼이 광대역으로 선형화된 분포를 얻을 수 있었다.

• Proceedings of the KIPE Conference
• /
• 2003.11a
• /
• pp.21-30
• /
• 2003

본 연구에서는 변조지수 M이 큰 영역에서는 고조파 스펙트럼의 광대역화 효과가 저하되는 2상 랜덤 중앙 정렬 변조기법 (Random Centered Distribution PWM : RCD)기법의 문제점을 해결하고자 멀티 영벡터 2상 RCD (Multi Zero Vector RCD : MZRCD) 변조기법을 제안하였다. 제안된 2상 MZRCD기법은 변조지수 M=0.7을 기준으로 하여 M이 0.7보다 큰 영역에서는 영벡터를 V(111)로 선택하고, 0.7보다 작은 영역에서는 V(000)을 선택한다. 제안된 방법을 유도모터 구동시스템에 적용해 본 결과, M이 0.7이상인 영역에서도 모터의 전압/전류 및 소음 스펙트럼의 광대역화 특성이 종전의 방법에 비하여 우수함을 확인할 수 있었다.

• Journal of the Institute of Convergence Signal Processing
• /
• v.4 no.3
• /
• pp.21-26
• /
• 2003

A new method to realize 3-dimensional object pattern recognition system using Fourier-based feature extractor has been proposed. The procedure to obtain the invariant feature vector is as follows ; A closed surface is generated by tracing the surface of object using the 3-dimensional polar coordinate. The centroidal distances between object's geometrical center and each closed surface points are calculated. The distance vector is translation invariant. The distance vector is normalized, so the result is scale invariant. The Fourier spectrum of each normalized distance vector is calculated, and the spectrum is rotation invariant. The Fourier-based feature generating from above procedure completely eliminates the effect of variations in translation, scale, and rotation of 3-dimensional object with closed-surface. The experimental results show that the proposed method has a high accuracy.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1994.10a
• /
• pp.160-164
• /
• 1994

본 논문에서는 구조물의 진동으로 야기되는 소음원을 규명하기 위해 구조물 동작중의 응답신호를 측정한다. 먼저 응답 신호벡터에서 스펙트럼행렬을 구성하여 특이치 분리법을 수행한다. 특이치의 정보로 구조물의 응답에 영향을 미치는, 서로 독립적으로 작용하는 주 가진원을 파악한다. 간단한 구조물에 대해, 본 논문에서 적용된 기법의 유용성 및 물리적 성질을 검토한 후, 자동차 파워트레인이 구조 진동이 실내 소음에 미치는 구조적 소음을 실험을 통해 규명한다.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2003.05b
• /
• pp.856-859
• /
• 2003

최근 우리나라의 애니메이션 수준이 급속히 발전하고 있음을 고려해 볼 때 이제 플래시와 포토샵은 컴퓨터 사용자라면 모르는 사람이 없을 만큼 웬 전반에 걸쳐 커다란 역할을 차기하고 있으며 좀 더 역동적이고 화려하면서 상호 작용적이며 벡터에 기반한 사이트를 제작하는 것은 세계적인 흐름에 순행하는 모습으로 보여진다 그런데 기존의 가장 일반적인 프리젠테이션 매체인 파워포인트 프레젠테이젼 시스템은 애니메이션 표현의 한계와 시각걱 효과가 부족하므로, 본 논문에 거는 플래시와 포토샵을 이용해 정지화면과 차별성이 있는 애니메이션의 적극적인 활동으로 사용자의 흥미와 집중력을 유도하도록 하는 프리젠테이션을 설계 및 구현한다.