• Applied Chemistry for Engineering
• /
• v.7 no.2
• /
• pp.315-320
• /
• 1996

In this paper, we investigated the retention amounts(ash contents) according to the addition amounts of retention aid and calcium carbonate and compared the mechanical and optical properties of sheets under the same ash content. As the addition amounts of retention aid increase, the retention of calcium carbonate, that is, ash contents of sheets increase in all retention system. In this case, the sheets included ash content as already expected is produced by adjusting the addition amounts of retention aid and calcium carbonate. Tensile index, burst index, tear index, internal bonding strength of sheets straightly decrease as the ash content of sheets increases. Especially, in the same ash content, all sorts of strength are high in compozil system, low in dual polymer system. Opacity increases along with according to the increase of ash content, and is high in hydrocol system, the worst in dual polymer system. In equal opacity, the strength of paper decreases compozil, hydrocol, and dual polymer system in order. But to judge she superiority or inferiority of retention aids, it should consider the various factors such as the optimum production and process conditions besides the retention amounts of filler and the sheet strength.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 1999.04a
• /
• pp.77-77
• /
• 1999

담배용 필터에 사용되고 있는 재료는 아세테이트, 종이, 폴리프로펼렌, 부직포등이 주로 이용되고 있으 며 담배연기의 흡착능을 향상시키기 위한 방법으로 활성탄 제오라이트와 같은 흡착제를 담배필터에 첨가하여 사용하고 있다. 본 실험에서는 펼터에 가장 보편적으로 많이 사용하고 있는 활성탄을 종이 제조과정에 첨가하여 나타나는 물리적 특성을 관찰하였고 제조된 종이를 담배필터에 적용하기 위하여 현행 습식 크림핑(crimping)방법과는 달리 건식 크림핑(crimping)방법을 이용한 적합한 조건을 검토하 였으며 이에 따른 담배필터에서의 연기흡착능을 분석한 결과는 다음과 같다. 1. 시트의 물리적 특성과 담배 연기성분 홉착능을 예측하기 위하여 펄프의 불성과 uv 홉착능을 분 석한 결과 Sw-BKP가 Hw-BKP에 비하여 강도적 성질이 우수하였고 또한 메틸렌불루(methylene b blue) 흡착능도 높은 경 향을 나타내 었다. 2. 활성탄 함량의 증가에 따라 섬유간의 결합력이 약화됨에 따라서 시트의 인장강도 및 파열강도가 감 소하는 경향이 가장 크게 나타났으며 평량이 펼프 배합비보다 높은 인자로 작용하였다. 또한 인자 간의 교호작용에서는 평량과 활성탄 함량에 따라서 크게 나타났으며 평량, Sw-BKP의 함량이 증가할 수록 인장강도는 증가하였다. 3. Stiffness는 활성탄 함량 펄프 배합비 평량의 순에따라 중요한 인자로 작용하였고 활성탄 함량 이 많을수록 stiffness는 감소하였으며 평 량 Sw-BKP의 함량이 높을수록 증가하였다 인자간의 교 호작용은 평량과 활성탄 함량이 다른 요인에 비하여 높은 경향을 보였다. 4. 인열강도는 활성탄 함량이 증가함에 따라 가장 크게 감소하였고 시트의 평량이 펄프 배합비보다 높은 인자로 작용하였으며 평 량 Sw-BKP의 함량이 높을수록 증가하였다 인자간의 교호작용에서는 펄프 배합비와 활성탄 함량에 따라 크게 나타났다. 5. 종이 필터지에서 시트의 평량이 bulk에 가장 큰 인자로 작용하였는데 이는 같은 두께에서 평량올 변화시킨 요인으로 판단되며 시트의 평량이 높을수록 감소하였고 활성탄 함량, Sw-BKP의 배합비 가 높을수록 증가하였다. 또한, 인자간의 교호작용은 평 량과 활성 탄 함량에 따라 크게 작용하였다. 6 6. Crimp index는 관능검사 결과로서 활성탄 함량이 증가함에 따라 현저하게 저하되었으며 평량 및 S Sw-BKP의 배합비가 높을수록 양호한 결과를 나타내었다. 인자간의 교호작용에서는 평량과 펄프 배합비에 따라 가장 높은 경향을 나타내었다. 7 활성탄을 첨가하여 제조한 종이필터의 담배 연기성분 흡착능은 acetate tow에 charcoal을 첨가한 필터에 비하여 tar흡착능이 6% 이상 향상되었고, 특히 증기상 물질(vapour phase)중 aldehyde류에 대한 제거율(removal efficiency)이 높게 나타났다. 8. 건식 크림핑 방법에 의한 담배필터 제조시 펼프의 홉착능, 시트의 강도적 특성, 크림핑 조건 및 담 배 연기성분 흡착능 등을 고려하여 적정조건을 선정하였으며, 펄프 배합비(Sw-BKP따w-BKP)는 6 65/35, 시트의 평량은 40g/$m^2$ 활성탄 함량은 10% 이었다.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.11 no.1
• /
• pp.39-48
• /
• 1978

1) The decrease in strength of Raschel twines at Raschel joints is regarded to be due mainly to the frictional force between yarns and the unbalanced tensile distribution by the deformation of the joints. The rate of the decrease is about $13\%$ in lengthwise pull and 22 to $26\%$ in breadthwise pull. 2) The 3-course joint is less in deformation and stronger than the 2-course joint in all cases of pulls. 3) The variation of Raschel joint strength $T_R$ with the angle $\varphi$ between the adjacent bars is expressed as $T_R=T_{R0}-k\varphi$ where $T_{R0}$ is the strength at $\varphi=0^{\circ}$ and K is a constant. 4) The tensile strength ${\sigma}R$ and tile breaking energy $E_R$ of Raschel netting are given by $${\sigma}R=KN\;or\;${\sigma}R=T_RN$$ and $$E_R=AN$$ respectively, where N is the number of meshes at the pulling side, and K and A are constants. But the breaking energy of the netting is almost constant independent of tile variation of N. 5) The Raschel netting with some bars cut already breaks from tile joints of the bars next to the cut bars and its tensile strength, breaking energy, and breaking elongation decrease largily even if only one bar is in already cut state. 6) The tearing strength of Raschel netting is almost equal to the tensile strength of its single joint pulled by two bars. 7) The twisted joint is much more excellent in strength than the knot or the Raschel joint. The knot strength is 69 to $76\%$, and the Raschel joint strength is 71 to $74\%$ in lengthwise pull and 62 to $67\%$ in breadthwise pull, respectively, of the twisted joint strength.

• Applied Chemistry for Engineering
• /
• v.9 no.7
• /
• pp.961-967
• /
• 1998

In order to improve the optical properties and printability of paper, various fillers are used in papermaking. This study was performed to investigate several fillers-precipitated calcium carbonate(PCC), ground calcium carbonate(GCC), and blends(PCC/talc or micro-talc(MVP) and GCC/talc or micro-talc(MVP)-for their effects on various newsprint properties. Results obtained from the study were summarized as follows ; 1) PCC treatment gave about 16.8% higher retention than GCC treatment at the filler level of 5% and the retention of filler in the handsheet increased as average particle size of mixed filler was increasing($PCC{\leq}GCC<MVP<talc$). 2) PCC treatment kept opacity more highly than no filler treatment and opacity decreased as average particle size of mixed filler was increasing. 3) Independent treatment of PCC kept tear strength more effectively than GeC did, and tear strength increased as average particle size of mixed filler was increasing. 4) Independent treatment of pee kept tensile strength more highly than other treatments and Gee treatment kept tensile strength highly than pee treatment under mixed filler treatment. 5) Burst strength under PCC treatments decreased linearly as average particle size of mixed filler was increasing. 6) Compared "With non-filler treatment, filler treatment gave much better printability.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2005.11a
• /
• pp.87-95
• /
• 2005

Laser sealing/cutting technique, one of the 4 core technologies to manufacture self-luminous glass tubes (SLGTs) has been developed. Through the analysis of commercial products it is found that Pyrex Is used for SLGTs. A CO2 laser, which is commonly used for glass work was used for the study The factors affecting the sealing/cutting were laser intensity, duration. Irradiation method, and pressure inside the tube. The whole Process is composed of 2 stages. In the first stage. both ends of the tubes are sealed while tritium is insected in the tubes. And the tritium sealed tubes are cut in the desired size in the second stage. Defocused beam was used for seal ing and focused beam was used for cutting. After the sealing/cutting, the tubes were heat treated to prevent fracture due to the residual heat stress.

• Journal of the Society of Naval Architects of Korea
• /
• v.52 no.2
• /
• pp.153-160
• /
• 2015

Pipelines are one of the most important structures in subsea equipment. It is the main equipment for transportation of crude oil and natural gas to the downstream facilities. Crude oil and natural gas leak will be carry out not only political and financial issues but also pollution to the environment. Inaccurate predictions of corrosion behavior will make hazardous consequences. The serviceability assessment of corroded structures is essential especially for subsea pipelines. As corrosion is concerned, the effects of failure due to significant reduction will make it hard to the pipeline operator to maintain the serviceability of pipelines. In this paper, the serviceability assessment of corroded crude oil pipeline is performed using the industry design code (Shell92, DNV RP F101, ASME B31G, BS 7910, PCORRC) and FEA depending on corrosion area. In last step, the future integrity of the subsea crude oil pipeline is assessed to predict the remaining year in service of crude oil pipelines.

• Economic and Environmental Geology
• /
• v.52 no.5
• /
• pp.471-484
• /
• 2019

Liquefaction occurs by a temporal loss of sediment strength as a consequence of increased pore water pressure during the re-arrangement of unconsolidated, granular sediments. Liquefaction is dependent on the physical properties of the sediments and cause surface cracks, landslide, and the formation of soft-sediment deformation structures(SSDS). SSDS is formed by the combined action of the driving force and deformation mechanism(liquefaction, thixotropy, and fluidization) that is triggered by endogenic or exogenic triggers. So research on the SSDS can unravel syndepositional geological events. If detailed sedimentologic analysis together with surrounding geological context suggest SSDS formed by earthquakes, the SSDS provide a clue to unravel syndepositional tectonic activities and detailed paleoseismological information(> Mw 5) including earthquakes that leave no surface expression.

• Composites Research
• /
• v.34 no.4
• /
• pp.257-263
• /
• 2021

Composite materials have been widely applied for fabricating pressure vessels used for storing gaseous and liquid fuel because of their high specific stiffness and specific strength. Accordingly, the accurate measurement of their mechanical property, particularly the burst pressure or fracture strain, is essential prior to the commercial release. However, verification of the safety of composite pressure vessels using conventional test methods poses some limitations because it may lead to the deformation of the load transferring media or provoke an additional energy loss that cannot be ignored. Therefore, in this study, the segment-type ring burst test device was designed considering the theoretical load transferring ratio and applicable displacement of the vertical column. Moreover, to verifying the uniform distribution of pressure of the segment type ring burst test device, the hoop stress and strain distribution of ring specimens were compared with that of the hydraulic pressure test method via FEM. To conduct a simulation of the fracture behavior of the composite pressure vessel, a Hashin failure criterion was applied to the ring specimen. Furthermore, the fracture strain was also measured from the experiment and compared with that of the result from the FEM.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.6
• /
• pp.2797-2803
• /
• 2012

This paper presents the pull-out behaviors of headed glass fiber reinforced polymer (GFRP) rebar embedded in mortar under tension loading. Five specimens with headed GFRP rebars that were anchored in the center of mortar bases were constructed and the pull-out test was conducted. To verify the test results, the finite element analysis was conducted and the results were compared with the FE analysis using ANSYS software package. Based on the test results it was indicated that the CCD(concrete capacity design) failure theory should be adopted and not to use the 45o cone failure theory as the breakout capacity in the headed GFRP rebar embedded in mortar.

• Proceedings of the KIEE Conference
• /
• 2006.10c
• /
• pp.303-305
• /
• 2006

본 논문은 HVAC(heating, ventilating, and air conditioning) 시스템의 효율성과 안정성에 기초하여, 과열도와 저압을 제어하는 Multi Fuzzy 제어기 설계를 제안한다. HVAC 시스템은 Compressor(압축기), Condenser(응축기), Evaporator(증발기), Expansion Valve(확장 밸브) 로 구성되며, 각각의 기기에 대한 제어가 독립적으로 이루어져 있다. 기존의 제어가 한 제어기를 사용한 단일방식으로 이루어지다보니 HVAC 시스템의 특성인 냉매의 상태가 달라지면 시스템 전반적으로 그 영향이 파급되는 부분까지 고려를 해 주지 못하고, 제어기의 성능이 효율적이고 안정적이지 못했다. 본 논문에서는 HVAC 시스템의 효율과 안정도에 결정적인 영향을 미치는 파열도와 저압을 제어하기 위해, 비선형성이 강하고 불확실하며 복잡한 시스템을 쉽게 제어할 수 있는 Fuzzy 제어기를 구성하여, 3대의 Expansion Valve 와 1대의 Compressor 에서 동시에 제어하는 Multi 제어기를 설계한다. 제안된 Fuzzy 제어기는 이산형 lookup_table 방식과 연속형 간략추론 방식을 사용하여 제어기를 설계하고, 유전자 알고리즘(GAs)을 이용하여 최적의 Fuzzy 제어기의 환산계수를 구한다. 그리고 시뮬레이션 결과를 통해 이산형 lookup_table 방식과 연속형 간략추론 방식의 각각의 제어기를 사용한 결과를 비교한다.