• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.3
• /
• pp.289-295
• /
• 2004

Pressure tubes are major component of nuclear reactor, but only selected samples are periodically examined due to numerous numbers of tubes. Current in-service inspection result show there is high probability of flaw existence at uninspected pressure tube. Probabilistic analysis is applied in this study for the integrity assessment of uninspected pressure tube. All the current integrity evaluations procedures are based on conventional deterministic approaches. So it is expected that the results obtained are too conservative to perform a rational evaluation of lifetime. More realistic failure criteria, based on FAD are also proposed for the probabilistic analysis. As a result of this study failure probabilities for various conditions are calculated, and examined application of FAD and LBB concept.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.1211-1215
• /
• 2003

Pressure tubes are major component of nuclear reactor, but only selected samples are periodically examined due to numerous numbers of tubes. Current in-service inspection result show there is high probability of flaw existence at un-inspected pressure tube. Probabilistic analysis is applied in this study for the integrity assessment of un-inspected pressure tube. But all the current integrity evaluations procedures are based on conventional deterministic approaches. So many integrity evaluation parameters are not directly apply to probabilistic analysis. As a result of this study failure assessment diagram are proposed based on test data.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.11
• /
• pp.116-123
• /
• 2001

A failure probability model based on Von-Mises failure criterion and the standard normal probability function is proposed. The effects of varying boundary conditions such as nearby cavity, backfill, load cycle and corrosion on failure probability of the buried pipes are systematically investigated. The location of cavity is found to affect failure probability of buried pipeline within a certain limit. It is noted that the flexibility of backfill plays a great role to change the failure probability of buried pipeline. Furthermore, the corrosion gives less effects than other boundary conditions such as cavity, load as cavity, load cycle, and backfill to the failure probability of buried pipeline.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.4
• /
• pp.204-213
• /
• 2003

A survey for finding corrosion examples was performed on the underground steel piles buried for 19 years in the area of iron and steel making factory near Young-il bay. A failure probability model, which can be used to check the reliability of the corrosive mechanical element, based on Von-Mises failure criterion and the standard normal probability function is proposed. The effects of varying boundary conditions such as temperature change, soil-friction, internal pressure, earthquake, loading of soil, traffic loads and corrosion on failure probability of the buried steel piles are systematically investigated. To allow for the uncertainties of the design variables, a reliability analysis technique has been adopted; this also allows calculation of the relative contribution of the random variables and the sensitivity of the failure probability.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.10a
• /
• pp.51-51
• /
• 2003

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.10 s.175
• /
• pp.137-143
• /
• 2005

The integrity of steam generator tubes in nuclear power plant should be maintained sufficiently during operation. For sake of this, complicated assessment procedures are required such as fracture mechanics analysis, etc. The integrity assessment of tubes has been performed by using conventional deterministic approaches while there are many uncertainties to carry out a rational evaluation. In this respect, probabilistic integrity assessment is considered as an alternative method for integrity assessment. The objectives of this study are to develop an integrity assessment system based on probabilistic fracture mechanics and to predict the failure probability of steam generator tubes containing an axial through-wall crack. The developed integrity assessment system consists of three evaluation modules, which apply first order reliability method, second order reliability method and Monte Carlo simulation method, respectively. The system has been applied to predict failure probability of steam generator tubes and the estimation results showed a promising applicability of the probabilistic integrity assessment system.

• Journal of the Korean Institute of Gas
• /
• v.14 no.4
• /
• pp.31-36
• /
• 2010

An alternative method is presented for predicting failure probability of pipelines with corrosion defects in this paper. The failure of corroded pipeline occurs when the operating pressure is grater than the remaining strength of the pipeline, and a limit state function can be defined as the differences between the remaining strength and the operating pressure. Then, based on structural reliability theory, we can estimate the failure probability of corroded pipeline, which is dependent on elapsed time of the pipeline with active corrosion defects. In this study, a root finding (RF) method has been adopted to solve the limit state function instead of Monte-Carlo simulation (MCS) method which traditionally has been employed to solve those kinds of problems. The calculation results shows that there are only small differences between the RF and the MCS method but the RF has higher efficiency in calculation than the MCS.

• Korean Chemical Engineering Research
• /
• v.55 no.3
• /
• pp.322-331
• /
• 2017

District heating was first introduced in Korea in 1985. As the service life of the underground thermal piping network has increased for more than 30 years, the maintenance of the underground thermal pipe has become an important issue. A variety of complex technologies are required for periodic inspection and operation management for the maintenance of the aged thermal piping network. Especially, it is required to develop a model that can be used for decision making in order to derive optimal maintenance and replacement point from the economic viewpoint in the field. In this study, the analysis was carried out based on the repair history and accident data at the operation of the thermal pipe network of five districts in the Korea District Heating Corporation. A failure probability model was developed by introducing statistical techniques of qualitative analysis and binomial logistic regression analysis. As a result of qualitative analysis of maintenance history and accident data, the most important cause of pipeline damage was construction erosion, corrosion of pipe and bad material accounted for about 82%. In the statistical model analysis, by setting the separation point of the classification to 0.25, the accuracy of the thermal pipe breakage and non-breakage classification improved to 73.5%. In order to establish the failure probability model, the fitness of the model was verified through the Hosmer and Lemeshow test, the independent test of the independent variables, and the Chi-Square test of the model. According to the results of analysis of the risk of thermal pipe network damage, the highest probability of failure was analyzed as the thermal pipeline constructed by the F construction company in the reducer pipe of less than 250mm, which is more than 10 years on the Seoul area motorway in winter. The results of this study can be used to prioritize maintenance, preventive inspection, and replacement of thermal piping systems. In addition, it will be possible to reduce the frequency of thermal pipeline damage and to use it more aggressively to manage thermal piping network by establishing and coping with accident prevention plan in advance such as inspection and maintenance.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.63-63
• /
• 2004

구동 및 동력 전달용으로 많이 쓰이는 기어장치는 최근 고속도비에서 사용이 증가함에 따라 다단기어장치의 설계에 대한 관심이 높아지고 있다. 하지만 다단 기어장치의 설계는 장치의 파손확률을 고려하지 않고 정적인 하중과 균일한 강도를 유지하는 차원에서 접촉해석과 강도설계 등이 주류를 이루었으며 대부분 설계자의 경험과 감각에 의해 시행착오적이고 반복적인 방식으로 이루어지고 있다. 또한 임의의 시간에서 다단 기어장치가 설계자의 의도대로 작동할 확률인 신뢰성에 대한 연구가 미흡하였다.(중략)

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.490-494
• /
• 2008

본 연구에서는 상수도 배수관로의 내 외부적 특성에 따라 개별관로를 정의하는 방법을 연구대상 지역의 배수관로 파손 데이터베이스에 적용하여 비례위험모형을 구축하였다. 연구에 사용된 자료는 연구대상지역의 배수관로의 제원 및 파손시기를 포함하는 관로 파손데이터베이스, 관로매설지역의 급수인구 및 수압범위에 관한 자료를 포함하는 GRID 데이터베이스와 관로매설지역의 토지개발 정도에 관한 자료를 포함한다. 이러한 자료를 이용하여 관로를 순차적 파손경험에 따라 7개의 생존시간군(STG I $\sim$ VII)으로 구분하고 각 생존시간군에 대한 비례위험모형(Model I $\sim$ VII)을 구축하였다. 이러한 모형을 이용하여 관로의 파손횟수가 증가하는 동안 파손에 영향을 미치는 인자의 변화와 그 효과를 파악하였으며, 또한 추정된 공변수의 위험비율을 분석함으로써 관로의 제원 혹은 매설환경, 급수인구 등에 따른 위험률의 상대적인 변화를 분석하였다. 또한 비례 위험모형의 구축과정에서 관로의 파손에 영향을 미치는 공변수의 비례성 가정을 검토하여 시간종속형 공변수를 모형화하였으며, 모형의 이탈잔차(deviance residual)를 분석하여 모형의 적합성을 검토하였다. 본 연구에서 구축된 비례위험모형에 대해 Shoenfeld 잔차를 이용한 스코어 잔차의 변화(score process)를 검토한 결과, Model I 과 Model II 에 대해서는 공변수의 시간종속 효과가 발견되었다. Model I에 대해서는 관로재질과 급수인구의 영향이 시간에 따라 변하며 Model II에서는 급수인구의 영향만이 시간에 따라 변하는 것으로 나타났다. 한편 Model III $\sim$ Model VII 들에 대해서는 공변수의 영향이 시간에 따라 변하지 않는 것으로 나타났다. 각 생존시간군에 대해 관로재질, 토지개발정도, 관로길이 및 급수인구의 변화가 관로의 상대적 누수위험률에 미치는 영향을 상대위험률의 95% 신뢰구간을 고려하여 정량적으로 산정하였고, 시간 종속형 공변수로 모형화된 공변수는 시간에 따른 공변수 영향의 변화를 분석하였다. 순차적 파손사건에 대한 비례위험모형의 구축 결과 생존시간군(STG) I의 기저위험률은 매설 후 대략 450개월까지는 파손 위험률이 '0'에 가까우나 그 이후로 급격히 증가하다가 매설 후 약 700개월에 이르러서는 약간 감소하고 약 850개월 이후에는 다시 급격히 증가한다. STG II의 기저위험률은 첫 번째 파손 후 약 300개월이 되면 위험률이 급격히 증가하는 것으로 나타났다. STG III $\sim$ STG VII의 기저위험률은 이차함수의 형태를 띄며, 특히 STG V, STG VI 및 STG VII의 기저위험률은 욕조형 곡선(bathtub curve)의 형태를 가진다. 각 생존시간군의 기저생존함수의 생존확률 '0.5'에 해당하는 기저중간생존시간에 대한 분석으로부터 파손횟수가 많아질수록 순차적 파손사건 사이의 경과시간은 감소하는 것으로 나타났다. 이러한 기저생존시간에 대한 경향은 관로의 파손횟수가 많아질수록 관로의 일반적은 내구성은 감소하기 때문인 것으로 분석된다.