• Journal of the Korean Magnetics Society
• /
• v.24 no.2
• /
• pp.60-65
• /
• 2014

We obtained resonance field ($H_{res}$) and linewidth (${\Delta}H_{PP}$) from measured ferromagnetic resonance signal in the functions of polar angle (${\Theta}_H$) in Ni thin film of 240 nm thickness fabricated by electrodeposition method. The angular dependence of $H_{res}$ was well fitted with the calculated ones. We confirmed that the g-factor and effective demagnetization field were 2.18 and 445 emu/cc by the theoretical analysis of the resonance field, respectively. The angular dependence of ${\Delta}H_{PP}$ showed very large values at in-plane direction (${\Theta}_H=90^{\circ}$), which could not explained by the homogenous linewidth due to the Gilbert damping and inhomogeneous linewidth due to the angular variations and magnetization variations by the surface layer. Therefore, we considered the spin wave scattering (two magnon scattering) process in order to analyze the measured inhomogeneous linewidth, which was appeared in thicker film than the critical thickness of 50 nm. The defect medicated spin wave scattering played a key role in the electrodoposited Ni thin film of 240 nm thickness.

• Journal of Korean Ophthalmic Optics Society
• /
• v.4 no.2
• /
• pp.45-49
• /
• 1999

The second harmonic, wavelength is 397nm, of the continuous wave diode laser, whose maximum power is 35mW, was generated in $LiIO_3$ crystals in a ring enhancement cavity. 5mm- and 10mm-long crystals cut $43.21^{\circ}$ for optic axis were used in this experiment. Both surfaces of those were anti-reflection coated for 794nm. In case the crystal was inserted into the cavity, the condition of separation between two concave mirrors for the optimum mode matching was found. The conversion efficiency of second harmonic generation was increased by the resonant enhancement of pumping power in the ring enhancement cavity, and the frequency of diode laser was locked to that of the counter-propagation mode generated from the surface of crystal. When the pumping power was 28 mW, the infrared buildup factor was about 45 without the crystal, and 14 with the crystal due to the transmission loss of crystal. The maximum second harmonic powers of $1.5{\mu}W$ and $6.6{\mu}W$ were obtained, and corresponding conversion efficiencies were $(6.584{\pm}0.56){\times}10^{-3}$%, $2.6{\pm}0.21){\times}10%{-2}$% in 5mm- and 10mm-long $LiIO_3$, respectively.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2011.06a
• /
• pp.235-235
• /
• 2011

Lau basin of south Pacific, as an active back arc basin, is promising area bearing seafloor massive hydrothermal deposit that is located in a subduction zone between the Pacific ocean plate and Indo-Australian continental plate. Korea Ocean Research and Development Institute tracked from 2004 to 2006 the hydrothermal activity to the extension of the northeast Lau Basin, targeting seamount. hydrothermal activity by tracking was found hydrothermal evidences. In this study, Marine seismic survey was carried out in the Lau basin seamount of the possibility of hydrothermal deposit. In particular, Marine magnetic survey and seismic survey was carried out at the same time in TA-12 seamount and noise characteristics were found in the seamount. the main process of data processing is Bandpass filter, FK filter, Deconvolution for noise attenuation such backscatter and multiple reflections. the migration is performed to compensate for reflection points followed by seamount of a slope. In this study, bedrock and upper strata could be identified and in the Future, the comparative method with Multi Beam Echo Sounder(MBES) are likely to derive the correct velocity model, the marine magnetic survey results should be considered.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.15 no.2
• /
• pp.378-385
• /
• 1995

The ultrasonic non-destructive testing uses the directivity of the ultrasonic pulse wave which propagates in one direction. The directivity is expressed as the relationship between the propagate direction and its sound pressure. The directivity of ultrasonic wave is closely related to determination of probe arrangement, testing sensitivity, scanning pitch and defect location and characterization. The paper measured the directivity of shear wave, which reflected from artificial defect located in weld metal zone in butt welded joint similar model made of pyrex glass by using visualization method. 2 MHz and 4 MHz angle probes were used to measure the directivity of reflection wave at the artificial defect. The directivity of shear waves reflected from the defect was different according to the probe position and the shape of butt welded joint. The difference of directivity of reflection wave was existed between 2 MHz and 4 MHz angle probes. The angle of reflection wave became equal to angle of incidence as increase of the height of excess metal.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.41 no.1
• /
• pp.54-63
• /
• 2005

Detection ranges of acoustic instruments mainly used for fisheries and their research are derived as the range bordered by a certain signal-to-noise ration (SNR) thershold. The SNR is depicted by several factors on transmitting and receiving, sound propagation, scattering by objects, and mainly self-ship noise. The detection ranges are shown for several fisheries instrument, such as echo sounder, quantiative echo sounder, and bio-telemetry system. The results can be used for designing the instruments, examining the capability of user's own instruments, and interpreting obtained data or echograms. Increasing transmitting power is not as effective for high frequencies as for low frequencies to increase the detection range. Comparison of volume backscattering strengths obtained by the quantitative echo sounder at several frequencies should be done within the same detection range. By applying the concept of the detection range for the bio-telemetry receiver beams, the number of the beams and the beamwidths can be determined.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.300.2-300.2
• /
• 2014

테라헤르쯔(terahertz : THz)파는 0.1~10 THz 의 범위로 적외선과 방송파 사이에 광대역 주파수 스펙트럼을 차지하고 있으며 직진성, 투과성, 그리고 낮은 에너지(meV)를 가지고 있어 비 파괴적이고 무해한 장점을 지니고 있다. Ti:sapphire laser와 같은 femto-pulse source 등이 많은 발전이 되어 현재 많은 연구와 발전이 이루어지고 있다. femto-pulse source를 이용한 THz 응용에서는 높은 저항, 큰 전자이동도, 그리고 아주 짧은 전하수명의 기판을 요구하는데 저온에서 성장한(low-temperature grown : LT) InGaAs는 격자 내에 Gallium 자리에 Arsenic이 치환 하면서 AsGa antisite가 발생하여 전하수명을 짧아지는 것을 응용하여 가장 많이 이용되고 있다. 본 연구에서는 보다 높은 저항을 얻기 위하여 molecular beam epitaxy를 이용하여 semi-insulating InP:Fe 기판위에 격자 정합된 LT-InGaAs:Be/InAlAs multi quantum well (MQW)를 well과 barrier를 가각 $10{\mu}m$ 씩 100주기 성장을 하였고 Ti와 Au를 각각 30, $200{\mu}m$로 dipole antenna를 제작 하였다. 이 때 Ti:sapphire femto-pulse laser (30 fs/90 MHz)를 excitation source로 사용하였을 때 9000 pA로 LT-InGaAs epilayer (180 pA)보다 50배 이상 큰 전류 신호를 얻을 수 있었다. THz 발생과 검출을 초소형, 초경량, 고효율로 하기 위해서는 fiber-optic를 이용해야 하는데 이때 분산과 산란 손실이 가장 적은 1550 nm 대역에서 많은 연구가 이루어 졌다. 780, 1560 nm의 mode-locking laser (90 fs/100 MHz)를 사용하여 현재 많이 이용되고 있는 Ti:sapphire femto-pulse laser와 비교하여 THz 특성 변화를 확인하는 연구를 진행 하고 있다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.27 no.5
• /
• pp.295-303
• /
• 2015

The eigenfunction expansion method is appled for the wave scattering by a vertical slotted, where both the inertial and quadratic drag terms are involved. Quadratic drag term representing the energy loss is linearized by the application of socalled equivalent linearization. The drag coefficient, which was empirically determined by Yoon et al.(2006) and Huang(2007) is used. Analytical results are verified by comparison to the experimental results conducted by Kwon et al.(2014) and Zhu and Chwang(2001). Using the developed design tool, the effect of energy loss by a vertical slotted wall is estimated with various design parameters, such as porosity, submergence depth, shape of slits and wave characteristics. It is found that the maximum value of energy loss across the slotted wall is generated at porosity value less than P = 0.1. The present solutions can provide a good predictive tools to estimate the wave absorbing efficiency by a slotted-wall breakwater.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.20 no.5
• /
• pp.397-401
• /
• 2000

The corrosion-fatigue characteristics of the 12Cr steel, which is widely used in fossil power plants as a turbine blade material, are evaluated nondestructively by use of the Rayleigh surface wave. In this study, the frequency dependency of the Rayleigh surface wave is investigated indirectly by measuring the angular dependency of the backward radiation of the incident ultrasonic wave in the aged specimens, and then compared to the corrosion-fatigue characteristics. The width of the backward radiation profile decreases as the increase of the aging temperature, which seems to result from the increase of the effective degrading layer thickness. This parameter also shows an inversely proportionality to the exponent, m, in the Paris law which predicts the crack size increasement due to fatigue. The result observed in this study demonstrates high potential of the backward radiated ultrasound as a tool for the nondestructive evaluation of the corrosion-fatigue characteristics of the aged materials.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2008.10a
• /
• pp.137-140
• /
• 2008

During CHAOS (2003, 2006) and SSGH projects (2007), acoustic investigation including hydroacoustic (HA), side-scan sonar (SSS) and highresolution sparker seismic (HSS) surveys was carried out on the northeastern Sakhalin slope ($53^{\circ}56'\;N$, $143^{\circ}52'\;E$ to $54^{\circ}40'\;N$, $144^{\circ}32'\;E$). More than 130 methane seeps with high backscatter intensity are identified on SSS mosaic, which are well accompanied with gas flares in the water column on HA profiles and subbottom gas chimneys on HSS profiles. It is likely that that some seeps align along a NW strike parallel to the Lavrentiev Fault.

• Korean Journal of Ecology and Environment
• /
• v.38 no.3 s.113
• /
• pp.352-360
• /
• 2005

Acheilognathus signifer is distributed widely in high density in the Naechon-stream. The order of this-stream was 2 ${\sim}$ 4 and the water width is wide but the depth is relatively shallow and the sinuosity is 1.83, which indicates a meandering stream. The water width/stream width ratio is 1.59, which suggests moderate entrenchment. Naechon-stream was classed as B type by Rosgen (1995). The natural habitat of A. signifer is a slow flow velocity pool, like a backwater pool, which is made up of piled up boulders that restricts the flow of water. The stream bed is made up of boulders and sands that enable the spawning host to inhabit. A. signifer selects a microhabitat where the boulders furnish hiding places. The Habitat of A. signifer is strongly affected by the existence or not there of U. douglasiae sinuolatus. After hatching from the mussel, A. signifer inhabits the surface of the water. It then moves to the low layer once it acquires swimming ability. While A. signifer inhabits the river in summer, A. signifer moves to the deeper layers in winter, where there are the refuge like rocks and boulders. In spring A. signifer moves from the deep water to the river line where the mussels reside.