• 한국해안·해양공학회논문집
• /
• 제26권4호
• /
• pp.225-243
• /
• 2014

단독의 파력발전 변환장치(WEC)를 설치하는 경우 경제성이 떨어지는 문제점이 있으므로 기존 혹은 신설의 방파제에 WEC를 적용하여 파랑제어와 파랑에너지의 이용을 동시에 도모하는 방식이 많이 추진되고 있다. 본 연구는 방파제로 연구 개발된 압축공기 주입식 방파제에 진동수주형 파력발전시스템을 탑재한 경우 방파제로의 기능과 파력발전장치로의 기능을 병행하여 검토한다. WEC로써의 기능을 검토하기 위해서는 압축공기실에서 유출되어 WEC로 유입되는 압축공기 흐름속도가 정확히 평가될 필요가 있다. 따라서, 본 연구에서는 선형속도포텐셜이론에 기초한 경계요소법을, 압축공기 흐름해석에 Boyle법칙과 단열변화과정에 기초한 상태방정식을 각각 적용하여 수치시뮬레이션을 수행한다. 이로부터 얻어진 해의 타당성은 여러 형태의 구조물에 대한 기존의 수치해석결과 및 실험결과와의 비교로부터 검증되며, 실제의 수치해석에서는 진동수주형 파력발전시스템을 탑재한 고정식 및 부체식의 방파제에서 여러 파라미터들의 변화에 따른 파랑변형율, 구조물의 운동 및 공기흐름속도의 특성을 규명한다. 또한, 풍력발전시스템을 본 구조물에 복합적으로 적용할 수 있으므로 파력과 풍력을 동시에 구비한 복합발전시스템의 방파제로도 기대될 수 있다.

• 한국해양환경ㆍ에너지학회지
• /
• 제19권1호
• /
• pp.7-17
• /
• 2016

본 연구에서는 대형 부유식 파력-해상풍력 복합발전 구조물의 극한환경 운동 성능에 관한 실험적 연구를 다루고 있다. 대형 부유식 복합발전 구조물에 대한 운동 성능을 평가하기 위하여 1/50 축척비의 모형을 제작하였다. 그리고 설계된 계류선의 사양에 부합하는 계류선 모형을 제작하였고 자유감쇠시험 및 static pull-out 시험을 통하여 검증하였다. 주어진 구조물의 수심을 만족하기 위하여 계류선 테이블을 도입하고 환경조건에 계류판에 따른 환경조건을 확인하였다. 모형시험에서 규칙파 중 운동응답을 확인하고 파랑, 조류, 바람의 복합환경 하중을 적용하여 극한환경 운동성능을 해석하였다. 최대 운동 및, 가속도를 계측하여 운동 안전성을 판단하였고 최대 변위와 계류 하중도 선급기준에 따라 판단하였다. 이로부터 복합발전 구조물의 운동 특성에 대하여 토의하였다.

• 한국전산유체공학회지
• /
• 제20권3호
• /
• pp.20-26
• /
• 2015

This paper introduces a computational method for analysis of the 6-DOF motions of a ship in waves using an overset grid technique which consists of inner and outer domains for representing body motions and numerical wave tank, respectively. High order interpolation scheme is employed to increase numerical accuracy over the interface where physical values, such as velocities and pressure, interact between the inner and outer domains. The numerical schemes and algorithm are addressed in the present paper. An application to motion of KCS container carrier in head waves is presented, and the comparison of responses on heave and pitch motions shows good agreement with those of model tests.

• 한국해안해양공학회지
• /
• 제12권3호
• /
• pp.130-138
• /
• 2000

일방향흐름에 의한 해류의 마찰력 계산을 위하여 Prandtl의 혼합길이 이론을 수심 전구간에 적용하고 난류의 세기와 수리조건에 따라 완난류와 전난류로 분류하여 마찰계수를 산정하는 개수로 마찰계수 산정방법을 제시하였다. 파랑과 해류의 합성류에 의한 해저마찰력을 계산하기 위하여 두 유속의 연직분포를 고려한 BYO 모형을 이러한 흐름특성을 반영하여 개선하였다. BYO 모형은 모든 유속의 연직분포가 해저면으로부터의 직선과 접선으로 만나는 점(Bijker point)을 도출하여 파운동 유속과 해류유속의 합성을 이 점에서 시행하여 일주기의 평균갑을 구하는 모형이다. 일방향흐름의 해류나 천해파에 의한 파운동이나 해저면 가까이 경계층흐름은 완난류, 천이난류, 전난류 등 세가지 종류로 대별된다. 그 중 완난류로 대별하여 두 경우에 대한 합성류 마찰력 산정방법을 제시하였다.

• 한국해양공학회지
• /
• 제23권1호
• /
• pp.16-23
• /
• 2009

The three-dimensional ship motion with forward speed was solved by a finite element method in the time domain. A boundary value problem was described in the frame of a fixed-body reference, and the problem was formulated according to Double-Body and Neumann-Kelvin linearizations. Laplace's equation with boundary conditions was solved by a classical finite element method based on the weak formulation. Chebyshev filtering was used to get rid of an unwanted saw-tooth wave and a wave damping zone was adopted to impose a numerical radiation condition. The time marching of the free surface was performed by the 4th order Adams-Bashforth-Moulton method. Wigley I and Wigely III models were considered for numerical validation. The hydrodynamic coefficients and wave exciting forces were validated by a comparison with experimental data and the numerical results of the Wigley I. The effects of the linearization are also discussed. The motion RAO was also checked with a Wigley III model through mono-chromatic and multi-chromatic regular waves.

• 한국해양공학회지
• /
• 제32권3호
• /
• pp.166-176
• /
• 2018

This paper presents a numerical sensitivity analysis for the simulation of the motion performance of an offshore structure in waves using computational fluid dynamics (CFD). Starting with 2D wave simulations with varying numerical parameters such as grid spacing and CFL value, proper numerical conditions were found for accurate wave propagation that avoids numerical diffusion problems. These results were mapped on 2D error distributions of wave amplitude and wave length against the numbers of grids per wave length and per wave height under a given CFL condition. Finally, the 2D numerical sensitivity result was validated through CFD simulation of the motion of a FPSO in waves showing good accuracy in motion RAOs compared with existing potential flow solutions.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.183-187
• /
• 2004

To predict rolling performance for a barge-type FPSO, the evaluation of correct nonlinear roll damping is critical. The squall section of FPSO causes a fair amount of viscous damping effect. Free roll decoy tests were conducted to estimate nonlinear roll damping for a barge-typ FPSO of three different loading conditions. The roll motion RAO was deduced by model tests in the wave condition of wideband spectrum. In numerical calculation, the quadratic damping was considered as equivalent linear damping using the results of free roll decay test. Tested roll performance in JONSWAP wave spectrum was compared with numerical results. These two results show good agreement, in spite of proximity in peak wave period and roll natural period.

• 한국해양공학회지
• /
• 제20권2호
• /
• pp.36-40
• /
• 2006

As large waves enter a harbor, during their propagation, the motions a floating body are large and if may even be damaged by waves. This phenomenon may be caused by harbor resonance, resulting from large motion at low wave frequency, which is close to the natural frequency of a vessel. In order to calculate the motion of a floating body in a harbor, it is necessary to use the wave forces containing the body-harbor interference. The simulation program to predict the motions of a floating body by waves in a harbor is developed, and this program is based on the method of velocity potential contiuation method proposed by Ijima and Yoshida The calculated results are shown by the variation of wave frequency, wave angle, and the position of a floating body.

• 대한조선학회논문집
• /
• 제50권4호
• /
• pp.232-239
• /
• 2013

This paper provides the structure of a Reynolds Averaged Navier-Stokes(RANS) based simulation method and its validation results for the ship motion problem. The motion information of the hull computed from the equations of motion is considered in the momentum equations as the relative fluid motions with respect to a non-inertial coordinates system. A finite volume method is used to solve the governing equations, while the free surface is captured by using a two-phase level-set method and the realizable k-${\varepsilon}$ model is used for turbulence closure. For the validation of the present numerical approach, the numerical results of the resistance and motion tests for DTMB 5415 at two ship speeds are compared against available experimental data.

• 대한조선학회논문집
• /
• 제48권6호
• /
• pp.516-527
• /
• 2011

This paper considers a numerical analysis of ship maneuvering performance in the high amplitude incident waves by adopting linear and nonlinear ship motion analysis. A time-domain ship motion program is developed to solve the wave-body interaction problem with the ship slip speed and rotation, and it is coupled with a modular type 4-DOF maneuvering problem. Nonlinear Froude-Krylov and restoring forces are included to consider weakly nonlinear ship motion. The developed method is applied to observe the nonlinear ship motion and planar trajectories in maneuvering test in the presence of incident waves. The comparisons are made for S-175 containership with existing experimental data. The nonlinear computation results show a fair agreement of overall tendency in maneuvering performance. In addition, maneuvering performances with respect to wave slope is predicted and reasonable results are observed.