• Nuclear Engineering and Technology
• /
• v.22 no.4
• /
• pp.337-350
• /
• 1990

A post-irradiation annealing study was conducted with use of reactor pressure vessel(RPV) steel A533B Cl.1 base metal irradiated to a dose of 4.84$\times$10$^{18}$ n/$\textrm{cm}^2$ at about 38$0^{\circ}C$. Microhardness and positron annihilation (PA) methods were used to obtain better understanding of the recovery of radiation hardening. Isochronal anneal experiments indicated that two recovery processes occur during annealing of irradiated specimens. The first recovery process occurs in the temperature range of 280-3O5$^{\circ}C$, Michrohardness and positron annihilation (PA) methods were used to obtain better understanding of the recovery of radiation hardening. Isochronal anneal experiments indicated that two recovery processes occur during annealing of irradiated specimens. The first recovery process occurrs in the temperature range of 280-305$^{\circ}C$. The variations of Ip, Iw and R parameters indicated that the formation of vacancy clusters by vacancy agglomeration and the annihilation of monovacancies are the first recovery process. The second recovery process occurs in the range of 405-49$0^{\circ}C$ and positron annihilation parameters measured indicated that the dissolution of carbon atoms decorated around vacancy-type defects and possible precipitates, and the annihilation of monovacancies give rise to the second recovery process. It was further indicated that radiation anneal hardening (RAH) in the range of 305-405$^{\circ}C$ between the temperature ranges for the two processes occurs due to the formation of carbon-decorated vacancy clusters and precipitates. The activation energies, orders of reaction and other characteristics of recovery processes were determined by the Meechan-Brinkman method. The activation energy for the first recovery process was determined as 1.76 eV and that for the second recovery process as 2.00eV. These values are lower than those obtained by other workers. This difference may be attributed to the lower copper content of the RPV steel used in the present study. The order of reaction for the first recovery process was determined as 1.78, while that for the second recovery process as 1.67 Non-integer orders of reaction for recovery processes seem to be attributed to the fact that several mechanisms for the first order and the second order of reaction are compounded in one process. This result also supports for the above conclusions from measurements of PA parameters.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.9
• /
• pp.1040-1049
• /
• 1992

When the model of control object is not described correctly, ambiguity is often expressed by unknown parameter, In a case that this ambiguity satisfies a certain condition of limit, if robust control method is used, even if model is not correctly discribed, control system can be composed. The characteristic of control based on the variable structure theory is that the influence by ambiguity of system eradicates high-gain feedback. Therefore in this paper, VSS indentifier is proposed. Transformation of control input producing control system in sliding mode actually reflects influence of ambiguity unknown parameter of control object. If useful information is out from transformation input by a few times of operation, proper identify mechanism is selected and this information is used, to decide the unknown parameter is possible. So more effective controller was composed by addition of the proposed identifier to the unknown parameter identifier of robot manipulator.

• Proceedings of KOSOMES biannual meeting
• /
• 2007.05a
• /
• pp.133-139
• /
• 2007

This paper aims to Analysis on Structure about Information assistance of VTS(vessel traffic service) using fuzzy structure model. Generally, fuzzy structure model is difficult to all structure of a system by difficulty of the choice of critical value and Parameter. In this paper, is able to analysis all structure about information assistance of ITS system by hierarchical structure graph and division graph. Also, this paper is analysis and show a practical problem with interpretation of a model through how some example again.

• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1635-1637
• /
• 2003

송전선의 뇌사고율은 뇌방전 현상, 송전선의 써지 전달 현상, 아킹혼 사이의 섬락 현상 등 다양한 현상이 관련된다. 송전선의 내뢰설계 목표는 이러한 자연현상 및 물리적인 현상이 편차를 포함하고 있다는 것을 인식하고, 가능한 한 정확도가 높은 뇌사고율을 예측을 수행하고 허용 가능한 뇌사고율을 산정하여 송전선로 설계시 반영하는 것이다. 이러한 예측 계산을 위해 한전에서는 EPRI에서 개발한 FLASH 프로그램을 기본으로 사용해 왔으며, 이 예측계산법의 타당성은 예측 사고율과 사고 실적과의 비교에 의해 검토되어야 한다. 한전에서는 과거 10년간의 뇌사고 실적과 FLASH 프로그램으로 계산한 예측 사고율이 차이가 많이 나타나고 있어, FLASH 프로그램의 예측 계산법의 타당성에 의문을 제기하고 있는 상황이다. 일본 전력회사들은 뇌사고율을 예측 계산하기 위하여 1988년에 전력중앙연구소에서 개발한 프로그램을 사용하여 왔으며, 최근에 사고 실적과의 비교 및 관련 연구를 수행하여 예측 계산 프로그램에 사용되는 파라메타를 수정 보완한 LORP2000-1을 완성하였다. 본 논문에서는 지리, 기후적으로 한국과 유사한 일본의 자연현상을 반영한 LORP 프로그램의 예측계산법이 한전 송전선로의 뇌사고율 예측 계산에 적용 가능성을 사고 실적과의 비교를 통해 검토하였다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.6
• /
• pp.55-62
• /
• 2004

Even though FOPDT(First-Order Plus Dead-Time) process is most widely applied in the industrial control field, it is difficult to figure out a in precise process model because of the long dead-time problem. Also, control performance may be deteriorated due to the mismatch problem of plant and model. Thus, the accuracy of process identification is the most important problem in FOPDT process control. In this paper, the proposed method using real-coded genetic algorithm outperforms the existing estimation methods that use step-test responses. The proposed strategy obtained useful result through a number of simulation examples.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.29 no.1
• /
• pp.245-251
• /
• 2005

When we design coastal and harbol facilities deepwater design wave and wind speed are the important design parameters. Especially, the analysis of these informations is a vital step for the point of disaster prevention. In this study, we made and an extreme value analysis using a series of deep water significant wave data arranged in the 16 direction and supplied by KORDI real-time wave information system ,and the wind data gained from Wan-Do whether Station 1978-2003. The probability distributions considered in this characteristic analysis were the Weibull, the Gumbel, the Log-Pearson Type III, the Normal, the Lognormal, and the Gamma distribution. The parameter for each distribution was estimated by three methods, i.e. the method of moments, the maximum likelihood, and the method of probability weight moments. Furthermore, probability distributions for the extreme data had been selected by using Chi-square and Kolmogorov-Smirnov test within significant level of 5%, i,e. 95% reliance level. From this study we found that Gumbel distribution is the most proper model for the deep water design wave height off the southwest coast of Korea. However the result shows that the proper distribution made for the selected site is varied in each extreme data set.

• Journal of Korean Society of Transportation
• /
• v.17 no.2
• /
• pp.193-198
• /
• 1999

An asymptotic distribution of the ratio of two normal vectors is estimated. Using the estimated asymptotic distribution, an approximation method to estimate confidence interval of passenger's value of travel time is proposed. As a result of empirical study the 95% confidence interval of value of travel time of home-to-work trips in city of Seoul is estimated at ￦7341.25$\pm$1945.05/hr.

• Journal of Navigation and Port Research
• /
• v.28 no.1
• /
• pp.43-49
• /
• 2004

Defects inspection of commodities are very important with those design and manufacturing process and essential to strengthen the competitiveness of those. If on-line automatic defects detection is performed without damaging to products, the production cost shall be curtailed through the reducing man-power, economical management of Q.C(Quality Control). In this paper, it is suggested three spatial filtering methods which can extract the necessary information in case of defects being on the surface of object like iron plate. In addition, the dependence of filtering characteristics on parameters such as the pitch and width of slits is analyzed and the surface defect detection system is constructed. Several experiments were carried out for determining the adequate spatial filtering method through comparing and analyzing effects of parameters like defect's size and shape, intensity of light, noise of coherent source and slit number.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.25 no.6
• /
• pp.349-356
• /
• 2013

The purpose of this study is to review and overcome the limits of the existing design wave model applied to such waters as those located inside bays or near islands where the impact of wind influenced waves are more dominant, due to the nature of topographic isolation, than the influence of direct waves coming from the open sea. Although the existing model for an inside bay design wave is excellent for considering wind factors and very adaptable to topographically complicated areas compared to other models, it is difficult to show the wave diffractions and reflections caused by large scale structures or topographic features in the region. The study examined the various methods capable of taking into account wave diffraction, the angle of wave reflection, and changes in water depth. As a result of applying the modified design wave model to the target situation (inside bay or near island areas), it was found that the reliability of the design wave height around marine structures was improved, compared to the existing models. Therefore, it is fair to predict that the new model could provide more accurate design waves in the design of marine structures.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.38 no.3
• /
• pp.155-165
• /
• 1989

In this paper, design equations for the calculation of the dimensions and characteristics of the ferrite magnet DC motor are derived. Through the computer iterative calculation applying the parameter survey method with those equations, the design method is presented. The following facts and the propriety of the design method are identified by comparing with the computer simulation results and dimension elements for the proposed motor. (1) The dimension ratio and the pole arc ratio as simulation parameters are in close connection with the dimension elements and motor performance, and those values of the parameter are important factor in determining the reasonable dimension of the motor. (2) It is proved that the minimization of the ferrite magnet volume is possible by representing the permeance coefficient as a function of the flux density ratio only. (3) It is shown that the torque equation suggested by introducing the copper loss area density of the conductors located in the slot is available in the determination of motor dimensions.