• Defense and Technology
• /
• no.2 s.276
• /
• pp.58-65
• /
• 2002

이 글은 최근에 개발되어 큰 관심을 모으고 있는 흡착성능이 대단히 우수하고 가벼운 활성탄소섬유(ACF 혹은 섬유상 활성탄소)에 유기인 화합물 신경작용제의 모델가스인 DMMP를 통과시켜 흡착 파과곡선을 측정하고 방독면과 보호와의 핵심소재인 첨착활성탄소(ASC-AC)와 제거능력을 비교하면서, ACF가 현재 사용되고 있는 독성가스 제거용 첨착활성탄소를 대체할 수 있는 가능성을 보고자 하였다.

• Journal of Korean Society of Water and Wastewater
• /
• v.28 no.4
• /
• pp.453-459
• /
• 2014

The excessive concentration of phosphorus in the river and reservoir is a deteriorating factor for the eutrophication. The converter slag was used to remove the phosphate from the synthetic wastewater. Influencing factors were studied to remove soluble orthophosphate with the different particle sizes through the batch and the column experiments by continuous flow. Freundlich and Langmuir adsorption isotherm constants were obtained from batch experiments with $PS_A$ and $PS_B$. Freundlich isotherm was fitted better than Langmuir isotherm. Regression coefficient of Freundlich isotherm was 0.95 for $PS_A$ and 0.92 for $PS_B$, respectively. The adsorption kinetics from the batch experiment were revealed that bigger size of convert slag, $PS_A$ can be applied for the higher than 3.5 mg/L of phosphate concentration. The pilot plant of continuous flow was applied in order to evaluate the pH variation, breakthrough points and breakthrough adsorption capacity of phosphate. The variation of pH was decreased through the experimental hours. The breakthrough time was 1,432 and 312 hours to 10 mg/L and 50 mg/L for the influent concentration, respectively. The breakthrough adsorption capacity was 3.54 g/kg for 10 mg/L, and 1.72 g/kg for 50 mg/L as influent phosphate concentration.

• Korean Chemical Engineering Research
• /
• v.43 no.5
• /
• pp.588-594
• /
• 2005

We have investigated Y zeolite and activated carbon for an adsorptive desulfurization of diesel. In batch experiments, cation ($Cu^{2+}$, $Ni^{2+}$) exchanged Y zeolites showed high equilibrium adsorption capacity for sulfur compounds in model diesel, which contained BT, DBT and 4,6-DMDBT of each 50 ppmw in n-octane. But the cation exchanged Y zeolites lost its capacity in commercial diesel (186 ppmw). On the other hand, activated carbon showed reasonable adsorption capacity for sulfur compounds in both model and commercial diesel. The adsorption capacity of sulfur on Ni-Y zeolite was decreased with the increase of benzene concentration in model diesel but the sorption capacity on activated carbon was insensitive to aromatic concentration. In breakthrough test, activated carbon of 1 g could treat 15 ml of commercial diesel with 186 ppmw sulfur. Toluene showed good solvent for regenerating activated carbon among several solvents.

• Clean Technology
• /
• v.21 no.2
• /
• pp.108-116
• /
• 2015

Hydrogen sulfide and ammonia are one of the common malodorous compounds that can be found in emissions from many sewages treatment plants and industrial plants. Therefore, removing these harmful gases from emissions is of significance in both life and industry because they can cause health problems to human and detrimental effects on the catalysts. In this work, pyrolytic carbon blacks from waste tires were used to develop adsorbent with good adsorption capacity for removal of hydrogen and ammonia. Pellet-type adsorbents were prepared by a mixture of carbon black, metal oxide and sodium hydroxide or hydrochloric acid, and their adsorption capacities were estimated by using breakthrough curve of a continuous fixed bed adsorption column at ambient condition. The adsorbent manufactured with a mixture of carbon black, iron oxide(III) and sodium hydroxide showed the maximum working capacity of hydrogen sulfide. For ammonia, maximum working capacity was obtained by the adsorbent manufactured with a mixture of carbon black, copper oxide(II) and hydrochloric acid.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 1997.10a
• /
• pp.65-66
• /
• 1997

우리나라의 대부분 하천과 인공댐의 경우 조류발생에 기여하는 영양염은 질소, 인 그리고 규소 등인데 특히 인이 생산제한 인자로 작용하고 있다. 따라서 인을 적절히 제거할 경우에는 조류 발생에 의한 수질의 악화와 수이용의 저해요인을 배제할 수 있어 이에 대한 연구가 많이 진행되어 왔다. 지금까지와 연구는 인의 화학적 응집 침전법, 생물학적 처리법에 대하여 수행되어 왔으나 설비자금, 운영비, 운전기술, 슬러지 생성 그리고 제거효율 등에서 만족스런 결과가 도출되지 못하여 현장 적용을 하지 못하고 있는 실정이다. 이러한 현실을 감안하여 우리의 자연 환경에서 쉽게 자할 수 있는 황토를 모재로하여 Al3-과 Fe3-, Ca2-을 적절히 배합하여, 주로 인을 선택적으로 제거하 고자 개발된 황토의 흡착능력 그리고 흡착 메카니즘에 대한 기본적인 연구를 하고자 (1) 등온흡착실험을 통하여 흡착용량을 평가하고 (2) 흡착제거속도를 평 가하였고 (3)파과시간 및 흡착특성을 파악하기 위해 column 흡착실험을 하였다 또한 (4) 황토내의 Al3-, Fe3-과 Ca2- 등이 인의 화학적 흡착에 기여하는 정도를 파악하여 흡착메카니즘을 규명하고자 하였다. 먼저 흡착용량실험을 위하여 PO3-4-P 농도 3ppm의 용액 200mf에 황토 0.2g, 0.5g, 1.0g, 2.0g을 각각 투여한 후 충분한 흡착평형이 일어나게 24시간 동 안 130rpm으로 $25^{\circ}C$ 등온반웅조에서 저어주어 흡착평형에 도달하면 상등액을 GF/C Filter로 여과한 후, 여액에 대해 PO3-4-P의 농도를 Ascrobic he건법으로 측정한 결파, Freundlich 등온흡착식에 의하면 K값은 17.34와 16.28이었으며 1/n 값은 1.32와 1.42로 인흡착 성능이 뛰어난 것으로 평가되었다. 둘째, 흡착속도 실험은 PO3-4-P 농도 1.5ppm의 용액 2f에 259의 황토를 투여하고 충분한 혼합이 일어날 수 있도록 170rpm으로 교반하면서 시간별 용액 의 농도 변화를 측정한 결과, 0.45mg/g/m교의 속도로 15분만에 94.3%의 인 제거 효율을 보였다. 셋째, 직경 12mm의 glass column에 황토를 209 채우고 1.5ppm의 PO34P 용액을 2.Sne11in의 유량으로 통수 시킨 후, 시간에 따른 농도 변화를 측정한 결과, 원수 농도의 50%에 해당하는 파과점까지 약 70시간 만에 도달하였다. 넷째, Al3-, Fe3-과 Ca2- 등이 화학적 흡착에 기여하는 정도를 파악하기 위 하여 황토 2g에 대하여 Hieltijes and Lijklema 방법에 의해 Adsorbed-p, Nonapatite inorganic-P(NAI-P), Apatite-p, Organic-P로 구분하여 분석하고, 총인(Total Phosphorus)을 Standard Methods에 따라 Persulfate digestion후 0.45 m membrane 여지 여과하여 여액에 대해 PO3-4-P의 농도를 Ascorbic Acid 법으로 측정한 결과, NAI-P가 가장 큰 비율을 차지하였고, 부원료로 첨가된 금속 양이온 중 Fe3-이온이 흡착에 기여하는 정도가 가장 큰 것으로 평가되었다.

• The Korean Journal of Pesticide Science
• /
• v.19 no.3
• /
• pp.230-240
• /
• 2015

An IOM sampler equipped with glass fiber filter has been recently utilized instead of solid adsorbent, which was used to measure the inhalation exposure of agricultural operator to pesticides. The aim of this study is to validate the efficacy of an IOM sampler by measuring the trapping efficiency and breakthrough using kresoxim-methyl water-dispersible granule and fenthion emulsifiable concentrate. On LC-MS/ MS, minimum detection level was 12.5 pg and method limit of detection was 5.0 ng/mL. Good linearity ($R^2$ > 0.999) for matrix matched standards was obtained. Recoveries of pesticides from glass fiber filter were 102-109% (kresoxim-methyl) and 97-104% (fenthion) while those from XAD-2 resin were 94-98% (kresoxim methyl) and 93-100% (fenthion). Trapping efficiency test was performed with personal air pumps and IOM sampler (glass fiber filter) connected with solid adsorbent (XAD-2 resin) with two types of formulation (solid and liquid) which were diluted by standard rate and sprayed to IOM sampler. Those pesticides were trapped only in glass fiber filter without any breakthrough to solid adsorbent. After spiking of pesticides to glass fiber filter, breakthrough test was carried out with IOM sampler (glass fiber filter) which was connected with solid adsorbent. As a results, 87-101% of kresoxim-methyl and 96-105% of fenthion remained in spiked glass fiber filter, however, no pesticides were detected in second glass fiber filter and solid adsorbent. In conclusion, IOM sampler which equipped with glass fiber filter can be applied widely for pesticide inhalation exposure study since it has good trapping efficiency and adsorption capacity, regardless of the solid or liquid formulation.

• Applied Chemistry for Engineering
• /
• v.18 no.4
• /
• pp.337-343
• /
• 2007

The reforming catalyst and the electrodes in fuel cells can be poisoned by the organic sulfur compound which is added as an odorant for checking out the leakage of natural gas, and that makes a big problem of system degradation. In this study, various adsorbents, such as silica, ${\gamma}$-alumina, activated carbon, HZSM-5, Ultra-stable Y zeolite (USY), and beta zeolite (BEA), were utilized to remove tetra-hydrothiophene (THT) and tert-butylmercaptan (TBM), and to confirm the performance in the adsorption of those odorants by using a continuous adsorptive bed. The effects of Si/Al ratio of zeolites, adsorption temperature and the type of balance gas (methane or He) on the adsorption performance in the packed bed have been investigated. In addition, the competitive adsorption between TBM and THT on the adsorbents was also estimated. The result shows that H-type BEA zeolite exhibited the highest adsorption capacity for TBM and THT odorant, and the higher amount of THT was removed adsorptively on the same adsorbent than TBM. The physical and chemical adsorption of those compounds on acid sites of zeolite were confirmed by temperature programmed desorption (TPD) and infrared spectrum (IR) analyses.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.177.2-177.2
• /
• 2011

폐기물 합성가스에 포함되어 있는 오염물질 중 황화합물($H_2S$, COS)이 존재할 경우, 다른 연계 공정을 구성하는 설비의 부식, 합성가스 이용 공정의 촉매 피독 문제, 대기 배출시 환경오염 문제 등을 야기 시키므로 제거가 필요하다. 고온 정제 공정을 적용하여 황화합물을 제거하기위해 산화아연을 이용한 고온 탈황 실험을 수행하였다. 고정층 반응기에 탈황제로 선정한 산화아연을 충진하고, 공간속도 $3,000h^{-1}$, 입구 황화합물의 농도 $H_2S$ 1,000ppm, COS 300ppm일 때 반응 온도 변화에 따른 탈황특성을 살펴보았다. 가스 내부에 $H_2S$가 단독으로 존재할 경우에는 $400^{\circ}C$ 이상에서 모두 제거되었으나, $H_2S$와 COS가 동시에 존재할 경우에는 $450^{\circ}C$ 이상에서 모두 제거되는 것을 알 수 있었다. 반응온도 $500^{\circ}C$에서 산화아연 탈황제를 이용한 실험결과 $H_2S$, COS의 파과시간은 각각 1,217, 1,063 min, 흡착능력은 269.9 mg-$H_2S$/g-sorbent, 124.7 mg-COS/g-sorbent으로 파악되었다.

• Journal of Radiation Protection and Research
• /
• v.29 no.1
• /
• pp.1-8
• /
• 2004

Diphosil, a new version of the organic-inorganic composite resin developed by ANL has a structure of the chelating diphosphonic acid groups grafted to a silica support. To apply Diphosil for the treatment of liquid radioactive waste from nuclear power plants, the adsorption equilibrium and column experiments were carried out for the main radionuclides, $^{137}Cs\;and\;^{60}Co$, in the liquid radwaste stream. Through the adsorption equilibrium experiments, the removal efficiencies of $^{137}Cs\;and\;^{60}Co$, and the effects of non-radioactive ions on the removal efficiency have been measured in various conditions using radiotracers. The breakthrough curves for the tested tracers were obtained from the laboratory scale column tests using the simulated liquid radioactive waste. In addition, the removal capacity of Diphosil is compared with that of Amberlite IRN 77 resin, generally used in nuclear power plants.