• The Magazine for Energy Service Companies
• /
• s.9
• /
• pp.28-31
• /
• 2001

센서라이트 부문에서 국내 최첨단의 기술력을 가지고 있다고 자부하고 있는 주식회사 키트론(회장 황태진)이 ESCO사업에 뛰어든 것은 지난해 5월, 아직 1년이 채 되지 않았지만 키트론은 초기의 시행착오에 따른 버그를 제거하고 올해 본격적인 비상의 나래를 펼치기 시작했다. 이른바 틈새시장에서 가능성을 확인했던 것. 또한 키트론의 황태진 회장은 올 정기총회에서 ESCO협회의 이사로 선임되어 그의 경륜과 지식을 바탕으로 ESCO협회 발전에도 도움이 기대되고 있다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.645-649
• /
• 1997

In case of swash plate type axial piston hydraulic motor, hydrostatic bearing used to achieve the lubrication effect on the mechanical sliding contact areas between the following parirs ; sliooer-pad and swash plate,piston and cylinder bore,valve plate and cylinder block, etc. This study discussed the basic charateristic for the hydrostatic slipper-pad bearings with the capillary or orifice restrictor under static load condition. And, we also development of hydrostatic bearing tester for hydrostatic balancing test of pistion & slipper-pad assembly, and some experimental data on supply pressure step responce are reported.

• Journal of the Institute of Convergence Signal Processing
• /
• v.4 no.1
• /
• pp.15-26
• /
• 2003

Ultrasonic inspection methods are widely used for detecting flaws in materials. The signal analysis step plays a crucial part in the data interpretation process. A number of signal processing methods have been proposed to classify ultrasonic flaw signals. One of the more popular methods involves the extraction of an appropriate set of features followed by the use of a neural network for the classification of the signals in the feature space. This paper describes an alternative approach which uses the least mean square (LMS) method and expectation maximization (EM) algorithm with the model based deconvolution which is employed for classifying nondestructive evaluation (NDE) signals from steam generator tubes in a nuclear power plant. The signals due to cracks and deposits are not significantly different. These signals must be discriminated to prevent from happening a huge disaster such as contamination of water or explosion. A model based deconvolution has been described to facilitate comparison of classification results. The method uses the space alternating generalized expectation maximization (SAGE) algorithm In conjunction with the Newton-Raphson method which uses the Hessian parameter resulting in fast convergence to estimate the time of flight and the distance between the tube wall and the ultrasonic sensor Results using these schemes for the classification of ultrasonic signals from cracks and deposits within steam generator tubes are presented and showed a reasonable performances.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.25 no.1
• /
• pp.27-35
• /
• 2005

Ultrasonic inspection methods are widely used for detecting flaws in materials. The signal analysis step plays a crucial part in the data interpretation process. A number of signal processing methods have been proposed to classify ultrasonic flaw signals. One of the more popular methods involves the extraction of an appropriate set of features followed by the use of a neural network for the classification of the signals in the feature spare. This paper describes an alternative approach which uses the least mean square (LMS) method and exportation maximization (EM) algorithm with the model based deconvolution which is employed for classifying nondestructive evaluation (NDE) signals from steam generator tubes in a nuclear power plant. The signals due to cracks and deposits are not significantly different. These signals must be discriminated to prevent from happening a huge disaster such as contamination of water or explosion. A model based deconvolution has been described to facilitate comparison of classification results. The method uses the space alternating generalized expectation maximiBation (SAGE) algorithm ill conjunction with the Newton-Raphson method which uses the Hessian parameter resulting in fast convergence to estimate the time of flight and the distance between the tube wall and the ultrasonic sensor. Results using these schemes for the classification of ultrasonic signals from cracks and deposits within steam generator tubes are presented and showed a reasonable performances.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1998.10a
• /
• pp.278-284
• /
• 1998

In order to measure the real contact force between head and disk on hard disk drive quantitatively, many technique of measurement have been developed. Acoustic Emission Sensor can be used for detect elastic energy of head/disk contact as arms value. In this study using pencil breaking test is proposed for finding contact force using transfer function between calibrated force and real contact force. And real AE data of subambient and tripad slider shows bending and torsional mode and their energy are dominant in hard disk and head contact.

• Journal of KIISE:Information Networking
• /
• v.32 no.4
• /
• pp.525-534
• /
• 2005

This paper is concerned with the query slipping and its prevention for trajectory-based matchmaking service in wireless sensor networks. The problem happens when a query propagating along a subscribe trajectory moves through a publish trajectory without obtaining desired information, even though two trajectories intersect geometrically. There follows resubmission of the query or initiation of another subscribe trajectory Thus, query slipping results in considerable time delay and in the worst, looping in the trajectory or query flooding the network. We address the problem formally and suggest a solution. First, the area where nodes are distributed is logically partitioned into smaller grids, and a grid-based multicast next-hop selection algorithm is proposed. Our algorithm not only attempts to make the trajectory straight but also considers the nodal density of recipient nodes and the seamless grid-by-grid multicast. We prove that the publishing and subscribing using the algorithm eventually eliminate the possibility of the slipping. It toms out that our algorithm dissipates significantly less power of neighbor nodes, compared to the non grid-based method, as greedy forwarding, and the fixed- sized grid approach, as GAF (Geographical Adaptive Fidelity)

• Journal of Bio-Environment Control
• /
• v.22 no.1
• /
• pp.73-79
• /
• 2013

An experiment was conducted to study incidences of heat loss in greenhouse in Gyeongnam province using thermal imaging camera in order to determine ways minimizing greenhouse heat loss. Measurements of this work showed that temperature differences between two experiment zones before and after installation of thermal curtains were about $2.0{\sim}3.0^{\circ}C$ and $1.0{\sim}2.0^{\circ}C$ respectively. There was a high correlation between the temperature data measured using a thermal imaging camera and a temperature sensor. There was no serious difference among areas, but between places on the first and second floor with thermal curtains for heat insulation, there was a relatively larger heat loss on the first floor than the second floor. Then in general the greenhouse types had no particular bearing on this matter, there was a relatively large heat loss in the parts of side wall window, the gaps and the parts folded of horizontal thermal curtains, the gutter parts, and the gaps of thermal curtain in the side wall window and facade back side for heat insulation, aren't completely sealed. It was found that there was a substantial heat loss due to infiltration through cracks on covering material, doors, ventilating openings, roof gables and floors, in particular.

• Korean Chemical Engineering Research
• /
• v.60 no.3
• /
• pp.377-385
• /
• 2022

Surface morphology and adsorption characteristics of charcoals prepared from Korean traditional kiln were analyzed, and their moisture adsorption capacities were examined with respect to humidity and temperature change. Moisture adsorption capacities of red-clay powder, activated carbon fiber fabric (ACF fabric) and activated carbon fiber paper(ACF paper) were also examined to compare with those of charcoals. Moisture adsorption capacity of charcoal was low less than 45% humidity due to its hydrophobic property, but it slowly and linearly increased as increasing the humidity. Moisture adsorption capacity of red-clay powder was similar to charcoal at low level humidity, it increased exponentially as increasing the humidity showing Type V adsorption isotherm. Therefore, the weather forecast annal prepared by employee of weather centre in Joseon Dynasty is experimentally approved. ACF fabric and ACF paper show excellent moisture adsorption capacities, which can be used to humidity measuring sensor. Adsorption isotherm of charcoal slice was peculear showing the mixed Type I and Type IV due to low-pressure hysteresis that was occurred from embedment of nitrogen in crevice of charcoal. The specific surface area of charcoal increased by grinding charcoal slice to powder, resulted in increasing the desorption amount of adsorbent at low relative pressure.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.783-785
• /
• 2015

Automotive Semiconductor revenue grew 3.9% in 2013 to $26.7 billion, driven by strength in LED lighting, ASSPs and analog ICs. Renesas Electronics held onto the No.1 spot despite a revenue decline, while Freescale Semiconductor, NXP, Texas Instruments and Robert Bosch made strong gains. Global Semiconductor manufacturers are paying attention to the Korean auto market, which reflects the reality of the local auto industry. The local industry has a long way go in the automotive semiconductor sector, even though it has grown to become the six-largest in the world. The reason for global semiconductors companies' interest in the local market lies in the fact that are the use of semiconductors in cars is on the rise, since smart and eco-friendly cars are becoming popular.

• Information and Communications Magazine
• /
• v.25 no.1
• /
• pp.5-11
• /
• 2008

우리 경제의 성장잠재력 저하에 대한 우려가 심화되는 상황에서 국민소득 2만불 시대 견인을 위해 2004년 수립한 IT 산업 발전전략이 IT839이다. 신성장동력 핵심기술 개발 등 IT839전략에 힘입어 세계 최초로 WiBro, DMB 기술개발과 국제표준화에 성공하는 등 IT분야 기술개발을 주도하여, 선진국과의 기술격차가 1년 이상 단축되었으며, 특히, 이동통신 DIV 분야는 미국, 일본 등 선진국 수준으로 경쟁력이 향상되는 성과를 보았다. 한편, 최근 IT를 둘러싸고 있는 환경은 IT를 기반으로한 융복합화 진전, 글로벌화 심화, 인터넷 확산과 웹의 진전이다. 2008년에는 이런 환경변화 속에서 IT산업의 지속적인 성장을 위한 전략을 수립.추진할 계획이다. 무선 융합환경에서 신시장 창출 및 선점, 고부가가치 IT산업의 집중 육성, IT중소기업, 핵심인력 양성 등 경쟁력 향상을 위한 기반 구축도 강화한다. IT R&D 정책은 기초 원천기술분야 R&D 투자비중을 확대하고, IT와 비IT융합 등 융합분야 기술개발 투자도 확대할 것이다. 혁신형 IT 중소기업 육성을 위해 민간 정책협력 네트워크인 IT전문협의회 운영을 개선하고, 중소기업의 원가절감을 위한 공통서비스 확대, 대 중소 기업의 상생협력을 제도화는 등 IT정책 인프라도 고도화한다. 또한, 반도체, 디스플레이 이후의 글로벌 주력품목군으로 IT SoC, u-센서, IT-BT-NT 융합분야 등 3대 핵심분야를 선정하여 집중 육성하고, 부품기업간 협업 활성화를 적극 유도할 것이다. 시장이 원하는 글로벌 수준의 인재양성을 목표로 공학교육인증 확산, IT 융합분야를 중심으로 대학의 R&D 지원도 강화하며, 전공역략을 갖춘 IT 전문인력, 석박사급 핵심 연구개발 인력, IT재직자 교육 등 시장이 원하는 맞춤형 인력양성도 병행 추진한다. 마지막으로 SW산업의 글로벌 경쟁력을 제고하고 신시장 창출을 위해 노력도 강화한다. 조선, 자동차 등 비 IT분야의 SW활용을 확산하기 위한 선도프로젝트를 추진하고, 틈새분야 중 세계적 시장점유율을 갖춘 중소기업 제품에 임베디드SW를 탑재하여 첨단기능을 구현하는 시범사업도 적극 추진할 계획이다.