• Journal of Aerospace System Engineering
• /
• v.16 no.5
• /
• pp.94-101
• /
• 2022

In this paper, we have obtained the acceleration coefficient of the IMU (Inertial Measurement Unit) to prove reliability by analyzing the characteristic of the MEMS IMU installed in guided weapon systems for overseas export and the operating environment of the guided weapon system. Additionally, based on designed life testing, we performed life tests on three the IMUs and demonstrated a target lifetime of 12 years.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 1999.06a
• /
• pp.297-302
• /
• 1999

본 연구에서는 Post-Tensionging System용 정착구의 구성품인 2 Piece Wedge 와 3 Piece Wedge를 장착한 P.S 콘크리트 시험체의 피로 수명 예측과 피로수명 분포특성을 고찰하기 위하여 피로시험을 수행하였다. 피로 시험결과를 피로해석에 적합한 것으로 알려진 Weibull 분포에 적용하여 실험과 확률해석에 의한 회귀분석식 및 피로강도의 비교, 2 Piece Wedge 와 3 Piece Wedge 시험체의 안전계수, 응력수준별, 피로 수명 분포도, 응력 수준별, 파괴확률, 2 Piece Wedge 와 3 Piece Wedge의 위험 함수등을 고찰하였다. (중략)

• Proceedings of the KIPE Conference
• /
• 2012.11a
• /
• pp.155-156
• /
• 2012

본 논문은 역률과 고조파 규제를 만족하는 새로운 형태의 수동형 LED 구동회로를 제시한다. 제안된 수동형 LED 구동회로는 능동형(SMPS 방식) LED 구동회로에 비하여 초장수명과 고효율 특성을 가진다. 특히 능동형 LED 구동회로 내부의 능동소자(스윗칭 소자)로 인한 짧은 수명 및 효율 감소를 수동소자만을 사용하여 효과적으로 해결하여, 역률은 0.98, 입력전류의 총 고조파 왜율은 16%, LED 드라이버의 효율은 95% 이상임을 확인하였다. 본 논문에서는 제안된 수동형 LED 구동회로의 설계 과정을 소개하며, 이론과 실험을 통해 그 우수성을 입증하였다.

• Journal of the KSME
• /
• v.30 no.2
• /
• pp.163-171
• /
• 1990

기계 구조물의 수명예측 및 평가에 대하여 기초이론과 실례를 중심으로 기술하였다. 기계설비의 파손방지 및 수명예측, 평가기술은 학문적으로나 산업분야에서나 종합적이므로 제작자, 설계자, 사용자, 연구자, 기술자 등이 서로 긴밀한 협력체제를 구축하여 지속적으로 설계, 재료, 운전, 시험, 검사, 보수 등 각자의 전문분야를 조화 있게 연구개발 하여야만 문제를 해결 할 수 있다는 뜻이다. 따라서 관련종사자는 협력체제를 설비 및 기업특성에 맞게 구축하는 것이 가장 중요하고 시급한 과제이다.

• Journal of the KSME
• /
• v.34 no.5
• /
• pp.372-383
• /
• 1994

복합재료의 피로특성과 해석방법에 대하여 간략하게 살펴보았다. 복합재료의 피로현상에 대한 이해의 폭이 넓어짐에 따라 앞에서 소개한 방법외에 파단모드별 연구, 역학에 기초를 둔 해석법, 유한요소법의 적용, 혼성복합재료(hybrid composites)의 피로수명 예측 등의 다양한 연구가 진 행중이나, 아직 정립된 피로수명 예측식은 없다고 말할 수 있다. 재료의 손상을 나타내는 매개 변수로서 강성변화의 유용성이 밝혀진 상태이므로 앞으로 이를 이용하여 실제의 현상을 표현할 수 있는 손상함수의 구성과 피로수명 예측에 관한 연구가 수행되어야 한다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.5
• /
• pp.921-927
• /
• 1989

One of the most important problems in recent life prediction is to introduce the degradation effects into life prediction procedure. In the present paper, the effect of the material degradation on the fatigue surface crack growth and fatigue life prediction in a 2 1/4 Cr-1Mo steel were investigated. The 2 1/4 Cr-1Mo steel has been used in a plant having operated for over 60000hours and subjected to material degradation due to temper-embitterment. A Monte-Carlo simulation was made on the basis of the data obtained in the experiment in order to determine the P-S-N diagrams of surface crack growth for the degraded and recovered steels.

• Journal of the Korean Society for Railway
• /
• v.19 no.1
• /
• pp.46-53
• /
• 2016

LED light sources have been known to have a long life and good energy efficiency compared to traditional light sources. Recently, headlamps using LED light sources have ensured the forward visibility and safe operation of high-speed rolling stock. However, assessing the lifespan of LED headlamps based on real test data is not easy because it depends on the multiple stress factors such as a fixed driving current, junction temperature, vibration and so on. Generally, LED headlamps have failed before their advertised life span mainly due to temperature. Thus, the performance assessment of a temperature control unit should be done before a life cycle test of LED headlamps. This study attempted to develop a prototype temperature control module for a lifecycle test system using a commercial LED headlight and verified the system through experiments.

• Journal of the Korean Institute of Gas
• /
• v.16 no.3
• /
• pp.29-34
• /
• 2012

Investigating safer ways to design and use to prevent a loss of life and property by failure of the structures are necessary and assessing total fatigue life with initiation and propagation of fatigue crack accurately through fatigue analysis is very important. The object of this study is to examine the initial life and propagation life when the fatigue crack is introduced from the root which is likely to appear in LOP(Lack of Penetration) cruciform fillet welded structure including bridges, ships and gas storage facilities which are impossible to be fully penetrated and to measure the rate of fatigue life until the final cleavage failure. As the result, each rate of fatigue life for fatigue failure is somewhat different in the range of 5% according to the thickness of material, however, the overall rate of initial life is in the range of 34~39% and propagation life showed the range of 61~66%.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.10 no.1
• /
• pp.15-22
• /
• 2010

Chloride-induced corrosion of steel bars in concrete exposed to marine environments has become one of the major causes of deterioration in many important facilities made of reinforced concrete. A study on chloride penetration in concrete has developed through long period exposure test along seawater, assesment of chloride ion diffusion by electrochemical techniques and so on. However, reasonable and exclusive chloride penetration model considering concrete material properties with mixture, degree of hydration, binding capacity has not been established. Therefore, in this paper, chloride penetration analysis of non-steady state is accomplished with material properties of concrete. Comparing with the results of analysis and chloride ponding test, we could accept the effect of binding capacity on chloride penetration in concrete and these results could be applied to a service life prediction of R.C. structures submerged in seawater. Therefore, there are 20~40% differences of service life to SHRP prediction.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.4
• /
• pp.325-330
• /
• 2018

This paper, following the shape parameters of the minimax distribution, describes the special form of the beta distribution, the Minimax distribution, as a function of the shape parameters for the software reliability model based on the non-homogeneous Poisson process. Characteristics and usefulness were discussed. As a result, the case of the shape parameter 1 of Minimax distribution than less than and greate in mean squared error is the smallest, in determination coefficient, appears to be high, the shape parameter 1 of Minimax distribution regard as an efficient model. The estimated determination coefficient of the proposed model is estimated to be more than 95%, which is a useful model in the field of software reliability. Through this study, software design and users can identify the software failure characteristics using mean square error, decision coefficient, and confidence interval can be used as a basic guideline.