• The Science & Technology
• /
• no.7 s.446
• /
• pp.7-11
• /
• 2006

• The Science & Technology
• /
• v.17 no.1 s.176
• /
• pp.22-25
• /
• 1984

자연식에도 발암물질있다 / 폐열이용 수경재배 / 레이저추적장치로 비행기연료 크게 절약 / 대기시간 신호표시판 / IBM, 조셉슨 소자 컴퓨터 연구중단 / 플라스틱 포도주병 / 택시의 컴퓨터 배차 / 영상을 기억하는 컴퓨터 등장 / 싼비용으로 백만불 미소를 / 로스알라모스연 소련여행 금지 / 자연질소의 바다로 덮인 트리톤

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.5
• /
• pp.925-932
• /
• 2001

The influence of ultraviolet(UV)-ray in sun light on human skin has been noted. Textiles can provide protection against harmful UV-radiation. Normally UV-absorbing finishes are used to get better protection. The purpose of this study is to evaluate the UV-cut properties of cotton fabrics treated with UV-absorber. 2,2-dihydroxy-4,4-dimethoxbenzophenone, as UV-absorber was applied to 100% cotton fabric. Reagents added in finishing solution were Triton X-100, polyethylene glycol 400, and $MgCl_2{\cdot}6H_2O$, and C.I. Direct Red 81. Both untreated and treated cotton fabrics were exposed to a xenon arc lamp for 20 and 80 hours. UV absorption spectra of finishing solutions and UV transmission spectra of fabrics were measured by the UV/VIS spectrophotometer. The results of this study can be summarized as follows. The results of this study can be summarized as follows. Absorption and the related transmission spectra were modified in a controlled way with UV-absorber. Absorption effect of UV-absorber was improved by adding Triton X-100, PEG 400, and $MgCl_2{\cdot}6H_2O$ in finishing solution. The UV absorption of finishing solution was in the following order: U/D/T/P/M>D/T/P/M> D/T> D/P, D>U/T/P/M>U/T>T/P/M>T. The UV transmittance of cotton fabrics was remarkably decreased by the application of UV-absorber and additives. The UV-cut properties were most improved by the application of U/D/T/P/M.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.9
• /
• pp.597-603
• /
• 2017

In this study, experiments were conducted on the MFB(minimum film boiling) point of highly heated vertical metal rod quenched in aqueous surfactant solution at various temperature conditions. The aqueous Triton X-100 solution(100 wppm) and pure water were used as the liquid pool. Their temperatures ranged from $77^{\circ}C$ to $100^{\circ}C$. A stainless steel vertical rod of initial center temperature of $500^{\circ}C$ was used as a test specimen. In both liquid pools, as the liquid temperature decreased, the time to reach the MFB point decreased with a parallel increase in the temperature and heat flux of the MFB point. However, over the whole present temperature range, in the aqueous Triton X-100 solution, the time to reach the MFB point was longer, while the temperature and heat flux of the MFB point were reduced when compared with pure water. Based on the present experimental data, this study proposed the empirical correlations to predict the MFB temperature of a high temperature vertical metal rod in pure water and in aqueous Triton X-100 solution.

• Korean Journal of Environmental Agriculture
• /
• v.40 no.1
• /
• pp.13-19
• /
• 2021

BACKGROUND: Chemicals such as antibiotics and surfactants can enter agricultural environment and they can be degraded by natural processes such as photolysis. These chemicals exist in mixtures in the environment, but studies on degradation of the mixtures are limited. This study compares the photodegradation of Triton X-100 (TX) and antibiotics [tetracycline (TC) and sulfathiazole (STH)] when they are in a single solution or in mixtures. METHODS AND RESULTS: TC, STH, and TX solutions were exposed to UV-A for the photodegradation tests for 14 days. The residual TC, STH, and TX concentrations were analyzed by using HPLC. The TC degradation was similar regardless of the presence of TX, while the TX degradation was lower in the presence of TC. The STH degradation was similar regardless of the presence of TX, while the TX degradation was greater in the presence of STH. However, the STH degradation was slower in the TC-STH-TX mixture than in the STH-TX mixture. Also, the TX degradation was negligible in the TC-STH-TX mixture. The results show that the photodegradation of TC, STH, and TX can be different in mixtures. This can be attributed to the different emission and absorption wavelengths of each compound and interaction between these compounds and photoproducts. CONCLUSION: Overall, this study emphasizes that photodegradation of single chemicals and chemical mixtures can be different, and more studies on single compounds as well as mixtures are required to understand the fate of chemicals in the environment in order to manage them properly.