• New & Renewable Energy
• /
• v.5 no.4
• /
• pp.68-73
• /
• 2009

국가 에너지 안보 확보와 친환경적이고 지속적인 '저탄소 녹색성장'의 기반을 마련한다는 측면에서 신재생에너지 분야의 인력양성은 시급하고도 중요한 당면 과제이다. 본 연구에서는 신재생에너지인력양성이 원활하게 공급되지 않았을 경우 발생할 수 있는 인력공급지장효과를 분석하기 위하여 산업연관분석의 공급유도모형을 유도하고 2006년 신재생에너지 인력양성사업 배출인원을 기준으로 실증분석을 실시하였다. 또한 공급유도형의 감응도 계수와 영향력계수 분석을 통해 신재생에너지 관련 사업과 타 산업 간의 전후방연쇄효과를 비교분석하였다. 연구 수행 결과 신재생에너지 관련 산업의 평균 영향력계수는 1.37, 평균 감응도 계수는 0.96으로 최종 수요적 제조업의 성격을 띠고 있는 것으로 나타났다. 또한, 2006년 신재생에너지 인력양성사업에 의해 배출된 336명의 인력이 공급되지 않았을 경우 공급지장비용은 총 230억이며, 8개 신재생에너지원 중 태양열과 연료전지에 인력 공급지장비용이 타 에너지원에 비해 상대적으로 높은 것으로 분석되었다. 산업분류 기준으로는 일반목적용 기계 산업과 전기기계 장치 산업이 신재생 에너지 인력공급 장애에 따른 지장비용이 높은 것으로 분석되었다.

• Clean Technology
• /
• v.27 no.4
• /
• pp.350-358
• /
• 2021

The results of this study shows that the combustor temperature ranged from 848.27 to 1,026.80 ℃, averaging about 976.61 ℃, and the NOx concentration increased as the temperature increased. The urea usage ranged from 291.00 to 693.00 kg d^-1, averaging about 542.34 kg d^-1, and the NOx concentration decreased as the urea usage increased. Residence time was about 3.38 to 9.17 s, averaging about 5.22 s, about 2.61 times larger than the 2 s of the design details. This is 1,086 kg h^-1, averaging about 55.71%, compared to the 1,950 kg h^-1 SRF input permission standard. The combustion chamber area is constant, but the residence time is shown to increase with the decrease of exhaust gas. The O₂/CO ratio was 847.05 to 14,877.34, averaging about 3,111.30, and the NOx concentration slightly increased as the O₂/CO ratio increased. As the combustor temperature and O₂/CO ratio increased, the combustion reaction with nitrogen in the air increased and the NOx concentration slightly increased. As the urea usage and residence time increased, the NOx concentration decreased slightly with an increase in reactivity with NOx. The NOx concentration at the stack ranged from 7.88 to 34.02 ppm with an average of 19.92 ppm, and was discharged within the 60 ppm emission limit value. The NOhx emission factor was 1.058 to 1.795 kg ton^-1, averaging about 1.450 kg ton^-1. This value was about 24.87% of the maximum emission factor of 5.830 kg ton^-1 of other solid fuels. Other synthetic resins and industrial wastes were 79.80% and 43.65% compared to 1.817 kg ton^-1 and 3.322 kg ton^-1, respectively. This value was similar to 1.400 kg ton^-1 of RDF in the NIER notice (2005-9), 10.98% compared to the maximum SRF of 13.210 kg ton^-1. Therefore, the NOx emission factor had a large deviation.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.05b
• /
• pp.591-596
• /
• 1997

천연 및 저농축 우라늄 가공시설은 취급하는 핵 물질의 민감도가 고농축 우라늄이나 플루토늄에 비하여 상대적으로 낮기 때문에 원자력발전소, 연구용 원자로 등과 같은 시설보다 국제원자력기구의 보장조치 적용 방법이 단순하다고 생각하기 쉽다. 그러나 가공시설은 취급되는 핵 물질이 UF6, 우라늄 분말, 소결체 등과 같이 계량하기 쉽지 않는 형태로 존재하는 중량시설(bulk handling facility)이기 때문에 오히려 핵연료집합체 만이 존재하는 계수시설( item facility) 보다 더 다양하고 정밀한 계량방법이 적용되고 있다. 이 때문에 국제원자력기구에서는 일반 원자력발전소의 4-5배에 달하는 사찰량을 가공시설에 투입하고 있으며, 동 시설에 대한 보다 효과적이고 효율적인 사찰방법을 개발하고 있다.

• Journal of Convergence for Information Technology
• /
• v.12 no.3
• /
• pp.85-107
• /
• 2022

This study is to analyze the induced effect, network connectivity, and network visualization of the water transportation industry on the overall economy in relation to all industries. For this, various inducement coefficients of the water transportation industry are analyzed using industry linkage analysis and unit structure matrix, and network visualization analysis is performed using network connectivity and NetDraw using Ucinet 6 that utilizes unit structure matrix and inverse matrix function. As a result of the study, analysis results of input coefficient, production inducement coefficient, value-added inducement coefficient, and inter-industry chain effect were presented as various inducement coefficients in the water transportation industry. content was presented. Through this study, the current position and status of the water transportation industry and its relationship with all industries were confirmed, and the strategic relationship with which industries it should be presented was presented. In the future, it is necessary to further analyze the current status and trends of various induced effects, connectivity (centrality), and network visualization analysis using industry-related analysis published since the 2000s.

• Proceedings of the KSME Conference
• /
• 2001.11a
• /
• pp.848-852
• /
• 2001

A new approach to the design of bank note counters is suggested. Modern bank note counters are equipped with several types of sensors for counting and detection of counterfeit bank notes. To achieve higher speed of counting while maintaining the sensing capability, longitudinal feeding scheme is proposed. Several merits of longitudinal feeding are discussed. Taguchi method is used for the optimization of the feeding mechanism.

• Journal of the Korean Statistical Society
• /
• v.5 no.2
• /
• pp.109-118
• /
• 1976

현행 일반적으로 쓰여지고 있는 물가지수 산식은 기준시점의 거래량(또는 거래금액)을 상품별 가중치(weight)로 삼는 가중총합방식(weighted aggregate formula, 또는 가중산술평균산식)으로서의 Laspeyres식이라 함은 주지하는 바와 같다. 그것이 상품별로 유통면의 중요성을 분명히 감안하여 있고, 비교시점의 가격변동만이 계산에 반영된다는 점에 있어서 물가지수로서의 실용성이 널리 인정되어 있는 산식이다. 그러나 Lasperyres식의 난점을 또한 많은 것이니 그 가운데 특히 가중치의 고정성과 관련하여 기준시점의 이동에 따른 전후 물가지수의 비연결성은 결정적 결함이라 할 수 있다. 여기에 이 식의 지수적 허구성이 흔히 논의되고, 이른바 Paasche check라 하여 수시로 조사한 거래량(또는 거래금액)에 의하여 물가지수의 가중치로 삼아서 전자를 검정하는 방법도 쓰여지는 형편이다. 필지는 일찌기(1973년) Laspeyres식의 상품별 가중치에 관한 객관적 평가법의 하나로서 산업(따라서 상품)의 연관분석적 수단에 의한 약간의 시안을 발표한 바 없지 않았다. 그것은 요약컨대 산업연관분석에 쓰이는 투입계수표를 중심삼아 한 상품가격이 다른 상품가격에 미치는 파급효과, 따라서 물가에 미치는 파급력을 계산하고, 나아가서 각 상품의 수요 및 공급함수를 도입하여 그들 계수를 추정함으로써 가중치의 객관화를 꾀해 본 것이 전고의 골자이다.

• Horticultural Science & Technology
• /
• v.16 no.1
• /
• pp.25-26
• /
• 1998

Nutrient supplying by a metering pump often produces the inaccuracy in the rate of inflow than expected. In this study, we developed the transpiration estimation system using the metering pump to measure the continuous supplying rate as well as to estimate the accurate transpiration rate. The system showed the stable characteristics by eliminating the fluctuations in the head loss of nutrient tank. The direct proportionality between the supplying time and the supplied nutrient solution was obtained. The exact correlation between the integrated solar radiation and the transpiration rate using the system was calculated, and correlation coefficients between the two factors were 0.98 in the NFT system and 0.92 in the aggregate system. This results suggest that the integrated solar radiation was an important factor to directly decide the supplying volume of nutrient solution in soilless culture system. The deveolped system using the metering pump in the study was able to control the supply of the nutrient solution to the crops adjusting to the variation of solar radiation.

• The KIPS Transactions:PartD
• /
• v.9D no.2
• /
• pp.259-266
• /
• 2002

The main issue in software development is the ability of software project effort and cost estimation in the early phase of software life cycle. The regression models for project effort and cost estimation are presented by function point that is a software sire. The data sets used to conduct previous studies are of ten small and not too recent. Applying these models to 789 project data developed from 1990 ; the models only explain fewer than 0.53 $R^2$(Coefficient of determination) of the data variation. Homogeneous group in accordance with project delivery rate (PDR) divides the data sets. Then this paper presents general effort estimation models using project delivery rate. The presented model has a random distribution of residuals and explains more than 0.93 $R^2$ of data variation in most of PDR ranges.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.6
• /
• pp.4192-4200
• /
• 2015

In this paper, dispersibility of steel fiber is improved mixing with form for material development of protection and blast resistant structure sprayed concrete. And it is developed a high toughness cellular sprayed concrete material using steel fiber. Oversupply form for dispersibility improvement of steel fiber is mostly fade away through sprayed, finally it is satisfied with the proper mixing ratio under 3 % ~ 6 %. This is considered for compressive strength and flexural toughness. Test results of compressive strength showed superior strength capability in 28, 56 days, also flexural strength and flexural toughness is great. Then oversupply form is enhanced for dispersibility of steel fiber and I think that it did not cause decreasing of strength. But analysis results of pore structure through image analysis failed for a great spacing factor and specific surface area. This is largely measured in spacing factor because air content have a grate evaporation effect for sprayed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.5
• /
• pp.3169-3175
• /
• 2014

In this paper, we have established the procedures for $CO_2$ emission estimation BIM libraries by using the material takeoff function that BIM tools fundamentally provide, and verified its availability by applying to steel structures. The BIM library set-up procedures were made up of $CO_2$ emission coefficients and parameter extraction, project unit setting, parameter setting, and $CO_2$ emission quantity calculation formula set-up. We used Revit Architecture 2013 as BIM tool, and established the steel members' family libraries as BIM libraries. It is possible to calculate the $CO_2$ emission quantity by following the proposed BIM library set-up procedures, and users have only to input the $CO_2$ emission coefficients and unit weights of steel members being used. We expect that the results contribute to practical use of BIM in field, and vitalizations of the eco-friendly construction.