• Journal of the Korea Organic Resources Recycling Association
• /
• v.17 no.1
• /
• pp.73-79
• /
• 2009

The hydraulic conductivity of porous media is the most important property in soil characteristics. The hydraulic conductivity is determined by outdoor and indoor methods. Indoor methods normally use soil columns for flow test. Assumption of the column test is that fluid one-dimensionally flows through the column. However, fluids may flow toward the wall of the column, resulting in "boundary flow". This study investigated the effect of boundary flow on the hydraulic conductivity by using a permeameter excluding boundary flow. The results showed that the hydraulic conductivity excluding boundary flow was much smaller than the hydraulic conductivity employing the conventional determination method. This study also investigated the effects of particle size and surfactant on the hydraulic conductivity. As the particle size increased, the hydraulic conductivity was increased. The hydraulic conductivity was reduced by increasing surfactant concentration. The result showed that the viscosity of fluid significantly affected the determination of hydraulic conductivity.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2001.04a
• /
• pp.93-97
• /
• 2001

시추공의 구간별 수리전도를 추정하는 방법으로는 수압시험(packer test)이 많이 이용되는데 최근에는 유속측정기(flowmeter)를 이용한 시추공 검층법이 개발되어 활발한 연구가 진행 중이다. 본 연구에서는 열원(heat-pulse) 공급 방식의 유속측정기를 이용하여 공주대학 교내에 설치된 시추공에서 자연 유속(ambient flow) 및 양수 유발 유속(pump-induced flow)을 측정하였으며, 자료를 분석하여 수리전도도의 수직적인 분포를 산정하였다. 분석 결과는 수압시험에 의해 산정된 수리전도도의 분포와 잘 일치하였으며, BIPS에 의해 촬영된 시추공 영상 자료와 비교함으로써 지하수 유동과 관련된 투수성 단열(conductive fracture) 들의 수직적인 위치를 정확하게 파악할 수 있었다. 분석 결과는 암반 대수층 내에 발달된 단열망(fracture network)에 대한 3차원적인 정보를 제공할 수 있으며, 이는 효과적인 지하수 모니터링, 모델링, 및 정화 설계(remedial design)에 필요한 기초 자료로 활용될 수 있을 것으로 기대된다.

• The Journal of Engineering Geology
• /
• v.12 no.3
• /
• pp.257-271
• /
• 2002

The vertical distribution of hydraulic conductivity of 3 boreholes located at Kongju National University was estimated by the ambient flow and the pump-induced flow measurements using a heat-pulse flowmeter. The ambient flow measurements showed that a great amount of groundwater (1~2 m$^3$/day) flowed in the boreholes through the conductive fractures. The analyzed conductivity profiles we similar to those of the packer test performed for the same boreholes. The conductive fractures in which the differential net flow changed greatly could be identified by the BIPS logging. The water-quality logging data showed that quality of groundwater changed abruptly at some depths of the boreholes. This change in water quality can be attributed to the presence of conductive fractures that have resulted in the mixing of groundwater of different quality flowing in different fracture channels. However, compared to the flowmeter test, the water-quality logging showed low capability in identifying locations of conductive fractures.