• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.6
• /
• pp.1393-1398
• /
• 2015

In this study, the electrical and optical properties of GZO (Ga-doped ZnO) thin films prepared on PES substrates by RF magnetron sputtering method with various working pressures (5 to 20 mTorr) were investigated. All GZO thin films exhibited c-axis preferential growth regardless of working pressure, the GZO thin film deposited at 5 mTorr showed the most excellent crystallinity having 0.44˚ of FWHM. In AFM observations, surface roughness exhibited the lowest value of 0.20 nm in a thin film produced by the working pressure 5 mTorr. Figure of merits of GZO thin film deposited at 5 mTorr showed the highest value of 6652, in this case resistivity and average transmittance in the visible light region were 6.93×10^-4Ω-cm and 81.4%, respectively. We could observed the Burstein-Moss effect that carrier concentration decrease with the increase of working pressure and thus the energy band gap is narrowed.

• Childhood Kidney Diseases
• /
• v.13 no.2
• /
• pp.99-117
• /
• 2009

Diabetic nephropathy is a major cause of chronic renal failure in developing countries, and the prevalence rate has markedly increased during the past decade. Diabetic nephropathy shows various specific histological changes not only in the glomeruli but also in the tubulointerstitial region. In the early stage, the effacement of podocyte foot processes and thickened glomerular basement membrane (GBM) is noticed even at the stage of microalbuminuria. Nodular, diffuse, and exudative lesions, so-called diabetic glomerulosclerosis, are well known as glomerular lesions. Interstitial lesions also exhibit fibrosis, edema, and thickened tubular basement membrane. Diabetic nephropathy is considered to be multifactorial in origin with increasing evidence that one of the major pathways involved in the development and progression of diabetic nephropathy as a result of hyperglycemia. Hyperglycemia induces renal damage directly or through hemodynamic alterations, such as, glomerular hyperfiltration, shear stress, and microalbuminuria. Chronic hyperglycemia also induces nonhemodynamic dysregulations, such as, increased production of advanced glycosylation endproducts, oxidative stress, activation of signal pathway, and subsequent various cytokines. Those pathogenic mechanisms resulted in extracellular matrix deposition including mesangial expansion and GBM thickening, glomerular hypertrophy, inflammation, and proteinuria. In this review, recent opinions on the histopathologic changes and pathophysiologic mechanisms leading to initiation and progression of diabetic nephropathy will be introduced.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.176-179
• /
• 2009

ZnO:Al 투명전도막을 유리기판위에 in-line RF-magnetron sputtering법으로 증착온도 및 증착압력에 따라 제조하고, 습식식각에 따른 박막의 표면형상 및 광학적 특성변화를 조사하였다. 초기박막은 육방정계(Hexanonal wurtzite)의 결정 구조와 (002)면의 c-축 우선배향성을 갖으며 가시광 영역에서 높은 광 투과도(T $\geq$ 80%)와 낮은 비저항($\rho\;=\;5.2{\times}10^{-4}{\Omega}{\cdot}cm$)의 특성을 나타내었다. 습식 식각 후 박막의 표면형상은 식각 전 박막의 결정성에 큰 의존성을 보이며 본 연구에서는 1 mTorr의 낮은 증착압력과 $350^{\circ}C$의 높은 증착온도에서 증착된 결정성이 우수한 막에서 높고 균일한 형태의 crater를 갖는 표면형상을 얻을 수 있었다. 균일한 crater를 형성하는 ZnO:Al 박막은 hill 형태의 표면형상을 갖는 상용 Asahi-U glass에 비하여 높은 Haze ($T_{diffused}/T_{total}$)값과 넓은 산란각을 나타내어 향상된 광 산란특성을 갖으며 이는 실리콘 박막 태양전지내로 입사된 광의 산란경로를 증가시켜 태양전지 성능을 크게 향상시킬 수 있을 것으로 기대한다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.571-571
• /
• 2013

본 연구에서는 유연 유기태양전지용 플렉시블 InZnSnO (IZTO)/PEDOT:PSS 투명전극을 제작하고 그 특성을 연구하였다. 이를 위해 선형 대향 타겟 스퍼터(Linear Facing Target Sputtering: LFTS) 시스템을 이용하여 그라비아 프린팅된 PEDOT:PSS/PET 매우 얇은 IZTO 투명전극을 성막하였다. 일반적으로 PEDOT:PSS 전극은 수분/산소에 약하지만 매우 얇은 IZTO passivation 층을 코팅함으로써 PEDOT:PSS의 안정성을 향상시키는 동시에 전기적 특성을 향상시킬 수 있다. 이러한 PEDOT:PSS 기반 하이브리드 투명 전극을 제작하기 위해 IZTO 두께를 5 nm에서 40 nm 까지 조절하여 IZTO/PEDOT:PSS 다층 투명전극을 제작하였으며, 이때 IZTO 두께 변수에 따라 제작된 하이브리드 IZTO/PEDOT:PSS 투명전극의 전기적, 광학적 특성을 분석하였다. 최적화된 20 nm의 IZTO의 두께에서 IZTO/PEDOT:PSS 하이브리드 투명전극은 PEDOT:PSS 단일층으로 제작된 플렉서블 투명전극과 동일한 우수한 유연성을 가짐과 동시에 PEDOT:PSS 단일층보다 현저히 낮은 면저항 값(353.6 ohm/sq.)과 높은 광투과율(83.09%)을 나타내었다. 최적화된 IZTO/PEDOT:PSS 투명전극으로부터 제작된 플렉서블 유기태양전지는 IZTO의 passivation 특성으로 인해 PEDOT:PSS 단일막을 이용하여 제작된 플렉시블 투명전극보다 우수한 소자효율을(FF: 59.04%, Voc: 0.588 V, Jsc: 7.554 mA/cm2, PCE: 2.622%) 나타내었다. 이러한 결과들은 LFTS 공법으로 PEDOT:PSS위에 성막된 IZTO passivation 층이 PEDOT:PSS의 특성을 향상시킬 뿐만 아니라, PEDOT:PSS의 안정성도 향상시킬 수 있기 때문에 기존 PEDOT:PSS 기반 투명 전극의 문제점을 해결할 수 있는 해결책으로 적용이 가능하다.

• Analytical Science and Technology
• /
• v.7 no.3
• /
• pp.285-291
• /
• 1994

A microbial BOD sensor for the continuous estimation of BOD was been developed by immobilizing Trichosporon cutaneum, which was immobilized between a dialysis and a gas-permeable membrane, on an oxygen electrode. The optimum pH and temperature for BOD measurement using this sensor were pH 7.0 and $32{\sim}33^{\circ}C$, respectively. The best result was obtained at 2~3ml/min flow rate in 0.1M phosphate buffer solution. A linear relationship was observed between ${\Delta}DO$ and the concentration of standard GGA solution below 60mg/l(90ppm $BOD_5$). The reproducibility was found to be within 3% for the standard solution containing glucose 30mg/l and glutamic acid 30mg/l. The output DO value of this sensor was almost constant for 30 dalys. The response time and the recovery time were about 5 and 10 min, respectively. This sensor was employed for the BOD measurement of waste pollutants and was compared with $BOD_5$ method.

• Electrical & Electronic Materials
• /
• v.9 no.5
• /
• pp.463-469
• /
• 1996

The double insulating layer consisting of anodic oxide and ZnS was formed for HgCdTe metal insulator semiconductor(MIS) structure. ZnS was evaporated on the anodic oxide grown in H$_{2}$O$_{2}$ electrolyte. Recently, this insulating mechanism for HgCdTe MIS has been deeply studied for improving HgCdTe surface passivation. It was found through TEM observation that an interface layer is formed between ZnS and anodic oxide layers for the first time in the study of this area. EDS analysis of chemical compositions using by electron beam of 20.angs. in diameter and XPS depth composition profile indicated strongly that the new interface is composed of ZnO. Also TEM high resolution image showed that the structure of oxide layer has been changed from the amorphous state to the microsrystalline structure of 100.angs. in diameter after the evaporation of ZnS. The double insulating layer with the resistivity of 10$^{10}$ .ohm.cm was estimated to be proper insulating layer of HgCdTe MIS device. The optical reflectance of about 7% in the region of 5.mu.m showed anti-reflection effect of the insulating layer. The measured C-V curve showed the large shoft of flat band voltage due to the high density of fixed oxide charges about 1.2*10$^{12}$ /cm$^{2}$. The oxygen vacancies and possible cationic state of Zn in the anodic oxide layer are estimated to cause this high density of fixed oxide charges.

• Conservation Science in Museum
• /
• v.2
• /
• pp.35-40
• /
• 2000

Conservation Science Lab. of the National Museum of Korea recovered Bamboo-plated inkstone case which is used for keeping inkstick, inkstone and inkstone water container by using traditional lacquering and wooden art technology. Texture and construction method of wood, ingredients for lacquering and the method, and the design were analyzed in order to restore the original manufacturing method. Especially, perfect restoration of partially damaged lacquer surface is the most important aspect in restoring Bamboo plated inkstone case, therefore focus was put on investigation of surface lacquering. First, lacquering surface sample was taken off from the object and processed into flake and observed with transmission microscope in order to investigate lacquering method and the pigment in the lacquering surface was analyzed with XRD and SEM-EDS. The result showed that the object was decorated with thin-layered bamboo in the surface which is made of Royal paulownio. and lacquered several times with the mixture of Hematite(Fe₂O₃) and Cinnabar(HgS) in the remaining part.

• Journal of the Korean Vacuum Society
• /
• v.9 no.2
• /
• pp.162-166
• /
• 2000

High quality $Si_3N_4$ metal-insulator-metal (MIM) capacitors were realized by plasma enhanced chemical vapor deposition (PECVD). Titanium nitride (TiN) adapted as a diffusion barrier reduced the interfacial reaction between $Si_3N_4$ dielectric layer and aluminum metal electrode showing neither hillock nor observable precipitate along the interface. The capacitance and the current-voltage characteristics of the MIM capacitors showed that the minimum thickness of $Si_3N_4$ layer should be limited to 500 $\AA$ under the present process, below which most of the capacitors were electrically shorted resulting in the devastation of on-wafer yield. According to the transmission electron microscopy (TEM) on the cross-sectional microstructure of the capacitors, the dielectric breakdown was caused by slit-like voids formed at the interface between TiN and $Si_3N_4$ layers when the thickness of $Si_3N_4$ layer was less than 500 $\AA$. Based on the calculation of thermally-induced residual stress, the formation of voids was understood from the mechanistic point of view.

• Membrane Journal
• /
• v.25 no.4
• /
• pp.358-366
• /
• 2015

Flat membrane with $0.4{\mu}m$ pore size was prepared with PVdF (polyvinylidene fluoride) nanofiber, which has the advantages such as excellent strength, chemical resistance, nontoxic, non-combustibility. After that, spiral wound module was manufactured with it including a woven paper. Effect of pH was studied by comparing permeate fluxes and rejection rates of the spiral wound module using simulation solution including kaolin and humic acid. The recovery rate and filtration resistance were calculated after water back-washing at the end of filtration experiment. In addition, after the water filtrated by the spiral wound module was passed through a column filled with GAC (granular activated carbon), adsorption effect of GAC was investigated by measuring the turbidity and $UV_{254}$ absorbance.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.26 no.6
• /
• pp.220-224
• /
• 2016

Anti-reflection (AR) thin films were fabricated on a glass substrate by using an ultrasonic spray. Glycidoxypropyl trimethoxysilane (GPTMS) and tetraethyl orthosilicate (TEOS) were used to synthesize a sol-gel hybrid coating solution. The moving speed of spray nozzle was changed from 15~25 mm/s to control the coating thickness of AR thin film. As the moving speed of spray nozzle increased, the thickness of AR thin film decreased from 138 nm to 86 nm. When the AR thin film was fabricated by nozzle moving speed of 20 mm/s, the refractive index and thickness of AR thin film was measured to be 1.31 and 104 nm, respectively. The average reflectance and transmittance of AR thin film coating glass was measured to be 0.75 % and 94 %, respectively into the visible light range of 380~780 nm.