• Proceedings of the Membrane Society of Korea Conference
• /
• 1996.10a
• /
• pp.47-48
• /
• 1996

최근 고분자 분리막을 이용한 기체 혼합물의 분리시 분리특성을 향상시키고자 하는 연구가 활발히 진행되고 있다. 그러나 고분자 막에 의해 기체를 분리할 경우 기체의 투과도와 선택도는 상반된 특성을 갖고 있어 투과도와 선택도 모두를 동시에 증가시키기 위한 분리막 소재의 개발 및 개선이 요구되며, 많은 연구자들이 이에 관련된 연구들을 수행하고 있다. 본 연구에서는 다양한 종류의 흡착제가 함유된 불균일상 기체분리막을 제조하여, 이막의 흡착제 함유량 변화에 따른 기체 투과성 및 발효가스중 특정성분 기체의 선택특성을 연구하였다. 본 연구는 김치를 포함한 우리나라 전통 식품의 밀폐포장내에서 발생되는 발효가스를 효율적으로 제거 또는 방출하기 위한 포장재 개발 연구에 대한 기초 연구로서 수행되었다.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1997.10a
• /
• pp.87-89
• /
• 1997

1. 서론 : 막을 이용한 분리기술의 실용화의 최대 과제는 선택성이 높고 용매의 투과용매의 투과속도가 높은 막재질 및 처리 면적이 큰 막의 개발이 필요하게 되었다. 이러한 성능 개발은 1960년대 cellulose acetate 계통의 막개발 이후 1980년대 지지층 고분자위에 다른 고분자 물질을 도포한 복합막(thin film composite layer)이 개발되어 막의 성능을 급격히 발전시켰다. 그 중에서 초박막화(ultrathin membrane)는 분리막에 의한 분리공정의 최대 결점인 낮은 투과량의 개선을 꾀할 수 있다는 장점 때문에 다양한 시도가 이루어지고 있다. 이러한 박막 제조 방법에는 박층분산법, 침지코팅법, 기상증착법, 계면중합법이 있으나, 섞이지 않는 두 계면 사이에서 고분자를 형성시키는 계면중합법은 수용상에 함침된 지지막위에 유기상을 계변에서 중합시켜 박막을 얻는 기술이다. 중합과정에서 일어나는 계면의 형성과정에 대한 연구는 미흡하기에 이에 본 연구는 시간에 따른 계면중합 반응 형성과정을 고찰하는 방법을 소개하고, 형성된 박막의 아론적, 실험적 두께 측정을 비교하였다.

• Membrane Journal
• /
• v.6 no.4
• /
• pp.236-241
• /
• 1996

We prepared temperature-sensitive polyurethane and its water permeation characteristics for possible uses as drug delivery systems. Mechanical properties and Tg of polyurethane depend on the molecular weight of polyol and the amount of hard segment. We confirmed the increase of permeability with temperature. This fact indicates the future use of the present material in drug delivery systems.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1995.04a
• /
• pp.58-59
• /
• 1995

기체 분리용 무기분리막은 고분자막과 비교하여 열 및 구조적 안정성이 우수하므로, 석탄가스화반응 혼합기체중의 기체분리 등 고온 또는 고압공정에 적합한 분리방법으로서 주목되고 있다. 기체의 분리를 위한 무기재료막은 크게 다공성막과 비다공성막으로 나눌 수 있으며, 이 중 비기공 성막의 경우 높은 선택도를 가지나 투과도가 낮아 경제성이 떨어지는 것으로 평가되고 있다. 한편, 기존의 다공성막의 경우 투과도는 높으나 기체의 분리가 혼합기체중 각 기체의 분자량의 차이에 의존하는 Knudsen 확산에 제한되는 낮은 선택도를 갖는 단점이 있다. 따라서 다공성막의 기공을 특정기체의 선택도가 우수한 촉매물질등으로 개선하여 비기공성막에 비해 우수한 투과도를 갖고, 기공성막에 비해 향상된 선택도를 보이는 복합막의 연구가 활발히 추진되고 이\ulcorner. 본 연구는 솔젤법에 의해 제조된 팔라듐 함침 알루미나 지지막의 기공을 침투$\cdot$증착(Soaking and Vapor-deposition)법에 의해 개선하여 기체의 투과도를 높게 유지하면서 수소의 선택성을 향상시키는 것을 목적으로 하였다.

• Clean Technology
• /
• v.8 no.3
• /
• pp.119-128
• /
• 2002

In the present study the membrane filtration characteristics of a commercially available synthetic water-based cutting oil through two kinds of ultrafiltration membranes (HF1-45-CM50 and HF1-43-CM100) with molecular weight cut-offs of 50,000 and 100,000, respectively, have been investigated in detail. Among these membranes, the hydrophilic one (HF1-45-CM50) was found to show a satisfactory result for both the permeate flux and the permeability of oil components, whereas the permeate flux obtained with the hydrophobic membrane (HF1-43-CM100) appears to be significantly low, indicating that synthetic cutting oil was easily wetted on the hydrophobic membrane surface and induced more membrane fouling. The effect of material characteristics of the membrane on the filtration characteristics was found to be much more significant compared with the mean pore size of the membrane. Backflushing by nitrogen gas was applied to reduce the formation of a gel layer and membrane fouling. With the hydrophilic membrane, the backflushing was found to increase the permeate flux, whereas the backflushing resulted in a decrease in flux for the hydrophobic membrane. The flux recovery was observed to be highest when the membranes fouled with waste synthetic cutting oil were immersed into a cleaning solution for more than 72 hours and then backflushed by nitrogen gas.

• Membrane Journal
• /
• v.19 no.1
• /
• pp.25-33
• /
• 2009

PES (polyethersulfone) membranes with highly enhanced their asymmetry were prepared by phase inversion process. The membranes were prepared by using PES/DMF (N,N-dimethylformamide)/TSA (p-toluenesulfonic acid)/PVP (polyvinylpyrrolidone) casting solution and water coagulant. The pre-coagulation of membrane surface which was induced by an addition of TSA as a demixing agent and PVP as a swelling polymer in the PES solution and humid exposure time, played a crucial role in determining morphological properties and the PWP (pure water permeation) performance. The PES solution was coated on polyester film under condition of 80% humidity for a while ($72{\sim}144$ sec) before immersing in a coagulation bath. The characterization of membranes was carried out by a capillary flow porometer, a FE-SEM and a permeation test apparatus. As the thickness of the smallest pore size layer (SPL) decreased, the asymmetry of membrane increased under conditions of 20 wt% of TSA and 10 wt% of PVP in 11 wt% of PES solution during longer humid contact time. As a result, the membranes showed a remarkable increase of PWP.

• Korean Chemical Engineering Research
• /
• v.46 no.3
• /
• pp.639-645
• /
• 2008

The objectives of this research are to (1) observe changes in particle size distribution due to formation of microflocs during coagulation process (2) identify the membrane fouling potential on cross flow system (3) investigate the mechanism of membrane fouling. The rate of flux decline for the hydrophobic membrane was significantly greater than for the hydrophilic membrane, regardless of pretreatment conditions. The pretreatment of the raw water significantly reduced the fouling of the UF membrane. Also, the rate of flux decline for the hydrophobic membrane was considerably greater than for the hydrophilic membrane. Applying coagulation process before membrane filtration showed not only reducing membrane fouling, but also improving the removal of dissolved organic materials that might otherwise not be removed by the membrane. That is, during the mixing period, substantial changes in particle size distribution occurred under rapid and slow mixing condition due to the simultaneous formation of microflocs and NOM precipitates. Therefore, combined pretreatment using coagulation not only improved dissolved organics removal efficiency but also flux recovery efficiency.

• Membrane Journal
• /
• v.18 no.1
• /
• pp.1-6
• /
• 2008

After membrane fouling factors in acrylic wastewater were minimized by pretreatment process accompanied with coagulation-filtration-neutralization, it was utilized in UF/RO process. After composing of ultrafiltration and reverse osmosis module set according to types and kinds of membrane, the separation characteristics were examined with the variation temperature and pressure using pretreated acrylic wastewater by membrane module sets. It was found that permeate flux of UF module in module set 4 was about two${\sim}$three times larger than that of UF module in module set 1. Final quantity of permeate from the module set 2 and module set 3 combined with tubular module was shown very good result. It was shown that the removal efficiency of TDS, T-N and COD was very low and was not dependent on the variation of temperature and pressure in all UF modules. The removal efficiency of TDS, T-N and COD was very excellent in RO module. Final water quality of acrylic wastewater was satisfied with effluent allowances limit and membrane module sets were ascertained to reuse wastewater.

• Journal of the Korean Chemical Society
• /
• v.37 no.1
• /
• pp.10-21
• /
• 1993

The transport phenomena of ten amino acid molecules through poly(2-hydroxyethyl methacrylate), P(HEMA) membrane have been investigated in various range pH solutions. It is found that the permeability and diffusivity of the amino acids through membrane depended on the different shape, size and the charge of them are changed by the pH. The permeabilities and diffusivities of amino acids have the largest value in the neutral solution. In this case, they are diffused through free water in the P(HEMA) membrane and the diffusion mechanism is the pore type. The basic solution have larger value than the acidic it. Whether the diffusion mechanism of the core type or the partition type, it is depended on the effect of side chain of the amino acid in basic and acidic solution.

• Membrane Journal
• /
• v.1 no.1
• /
• pp.34-43
• /
• 1991

The relationships between affinity of membranes and optimum operation conditions were investigated in the pervaporation of water(1)/ethanol(2) mixture through cellulose acetate(CA) membranes having more affinity to water and silicone rubber(SR) membranes having more affinity to ethanol. CA and SR membranes were prepared and amount of sorption, sorption selectivity, pervaporation separation factor and pervaporation rate in both of membranes were determined and compared. The effects of downstream pressure were analyzed using Thompson diagram and the sorption and pervaporation characteristics with composition of feed and operation temperature were examined in terms of affinity, activity coefficient, plasticizing effect and activation energy of individual species. In the separation of water through CA membranes, high performance of both pervaporation separation factor (water to ethanol, $[\alpha^2_1]_{PV}$) and pervaporation rate was obtained in the conditions of low downstream pressure, middle range of feed concentration and high temperature. In the separation of ethanol through SR membranes, pervaporation separation factor(ethanol to water, $[\alpha^2_1]_{PV}$) increased with downstream pressure and decreased with concentration of ethanol in feed and operation temperature, while pervaporation rate showed opposite trends to those of ($[\alpha^2_1]_{PV}$).