• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.371.1-371.1
• /
• 2016

다양한 물질계의 2차원 나노구조는 그래핀과 함께 그 고유특성으로 최근 광전소자, 전자소자, 센서, 에너지 생성 및 저장과 수소에너지 생성 등의 응용으로 매우 많은 관심을 받고 있다. 특히 층상이중수산화물 (layered-double hydroxide; LDH) 2차원 나노구조는 생성의 용이성과 층상 내 금속 이온의 교환을 통한 특성의 자유로운 제어가 가능하므로 많은 관심을 받고 있다. 층상이중수산화물 화합물은 [Zn(1-x) MIII(x)(OH)2][$An-x/n{\cdot}mH2O$] (MIII = Al, Cr, Ga; An- = CO32-, Cl-, NO3-, CH3COO-) 구조로써, Brucite-type 구조 내에서 3가 양이온의 상태에 따라서 다양한 특성을 제어할 수 있는 장점이 있다. 이러한 장점으로 인해 층상이중수산화물 화합물은 촉매나, 에너지 저장, 음이온 교환 및 흡착, 화학적 촉매, 바이오 소자 등에 응용이 연구되고 있으며, 다양한 금속 산화물을 제조하기 위한 중간자 precursor로써도 연구되고 있다. 하지만, 이러한 대부분의 연구들을 통한 결과물들이 분말 및 수용액 상태로 남게 되며, 이러한 화합물의 특성을 제어하기 어려운 문제점이 있다. 더욱이 이러한 나노구조물들을 다양한 소자로 응용하기 위해서는 상용의 실리콘이나 glass 등의 기판형태의 물질상에 성장시킬 수 있어야 하며, 그러한 기판 위에서의 형상 및 특성 제어가 용이해야 한다. 따라서 본 연구에서는 실리콘 기판을 적용한 Zn기반의 층상이중 수산화물 화합물을 성장하고, 하부물질의 조성제어를 통한 층상이중수산화물 화합물의 형상제어가 가능한 기술에 관한 연구를 보고하고자 한다. 이를 위한 하부물질의 조성은 Zn와 Al을 통해 이루어지며, 기형성된 Al2O3박막을 핵형성층으로 활용한다. 이러한 방법으로 형성된 층상이중수산화물 화합물에 대해 이차전자주사현미경, 투과전자현미경 및 X-ray회절기법을 통해 구조분석을 하고, Raman 및 광발광스펙트럼 분석을 통해 광학적 분석을 시행함으로써, 층상이중수산화물이 기판상에서 형성되는 메커니즘에 관한 규명을 시행하였다. 이러한 분석연구를 통해 핵형성층의 에칭 따라 실리콘 기판상에서 성장하는 층상이 중수산화물 화합물의 형상 및 조성이 제어되는 메커니즘을 구명하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.162.2-162.2
• /
• 2015

플렉서블 디스플레이에 사용되는 투명전극은 벤딩에 의한 인장(tensile) 및 압축(compressive) 스트레스 하에서도 전극의 특성이 지속적으로 유지되어야 한다. 기존 OLED소자의 투명전극으로 사용되던 인듐산화물(ITO, Indium Tin Oxide)는 인듐(Indium)의 희소성 문제뿐만 아니라 벤딩에 대한 복원력이 나쁜 것으로 알려져 플렉서블 디스플레이에는 적합하지 않은 것으로 알려져 있다. 벤딩에 강하고 복원력이 우수한 투명전극 재료가 필요하게 되었다. 본 연구에서는 PEN (Polyethylene Naphthalate) 유연기판 상에 그래핀(Graphene)전극을 구현하여 벤딩에 대한 저항특성을 관찰하였고 일반적으로 많이 사용하는 Aluminum 전극과의 비교를 통해 광효율을 지속적으로 유지할 수 있는 플렉서블 OLED용 전극구현 가능성을 연구하였다. 일반적으로 Al금속은 인장 스트레스를 받음에 따라 저항이 증가하고 다시 복원되면 저항이 감소하는 특성을 갖고 있는데 인장 스트레스에 따라 저항과 늘어난 길이와의 관계는 다음과 같다. $R/R0=(L/L0)^2$ ----------------------------------------- (1) 그러나 반복된 스트레스가 가해질 경우 Al 금속 전극은 복원력을 잃고 저항이 원래대로 돌아가지 않는 문제가 발생하는데 반해 그래핀은 벌집모양의 구조를 갖고 있어 벤딩에 대한 강도가 셀 뿐만 아니라 고탄력으로 인해 복원력이 우수하여 여러 싸이클(cycle)의 벤딩 실험에 의해서도 복원력이 지속적으로 유지되었다. Al 금속 전극의 경우 벤딩 각도 또는 정도에 따라 복원력이 유지되는 구간이 있으나 반복적인 벤딩 싸이클에 의해 복원력이 감소하여 인장 스트레스에 의한 저항 증가 후 스트레스 제거 시 저항 감소가 되지 않는데 24시간 동안 전기 저항 변화를 관찰하면 수시간 후에나 저항이 어느 수준까지만 복원되는 것을 확인할 수 있었으나 복원에 오랜 시간이 소요된다는 점에서 그래핀과 비교가 된다. SEM(Scanning electron microscopy) 분석을 통해 인장 스트레스 인가/제거를 반복함에 따라 Al 금속표면이 표면에 열화되는 것을 확인하였으나 그래핀에서는 나타나지 않았다. 본 연구에서는 높은 투과도와 우수한 전기적 특성을 가지는 그래핀 투명 전도성 전극이 다양한벤딩 조건에서도 뛰어난 복원 특성을 보이는 것을 밝혀내어 차세대 투명 전극 물질로 개발하고자 하였다.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.18 no.4
• /
• pp.49-61
• /
• 1981

A generally applicable computer simulation program for diffused silicon solar cells has been developed on the basis of the experimental results. The program can be easily used to obtain the spectral response and I-V characteristics for N+P, P+N N+PP+, P+NN+cells by changing various input parameters. The insolated spectra can be taken from AMI and constant intensity and GE - ELH lamp light sources. The options for AR coating are Si3N4 film and materials with constant reflectance including zero reflectance for ideal case. The computer simulation demonstrates successful results compared with the measured values for the short circuit current, open circuit voltage, efficiency, spectral response, quantum efficiency, I-V characteristics, etc. This program was used to optimize doping concentration, cell thickness, light concentration, junction depth, and to obtain the limit values for front surface recornbination velocity, effective carrier life time in the depletion regions and shunt resistance, and also to drive the changing rate in conversion efficiency depending on operation temperature, series resistance and electric field strength in N+P+ bulk regions.

• Applied Biological Chemistry
• /
• v.50 no.3
• /
• pp.160-166
• /
• 2007

This study was performed to analyze the molecular structural and physical properties changes of modified rice starch, which particle structure was broken using high impact planetary mill and ultra fine pulverizing techniques. The average diameter and specific surface area of rice starch after pulverization decreased 20% and increased 25%, respectively. Low molecular substances content in rice starch using GPC (gel permeation chromatography) increased from 36.5% to 59.5% after pulverizing of rice starch. Damaged starch contents in rice starch also increased from 16.4% to 99.2% after pulverizing of rice starch. Water holding capacity, solubility and transmittance of rice starch after pulverization increased compared to those of control. Apparent viscosity value of rice starch after pulverization decreased to 7% in control based on $30^{\circ}C$ and 20 RPM conditions.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.13 no.5
• /
• pp.241-246
• /
• 2003

The transparent conducting thin film of ATO (antimony-doped tin oxide) was successfully fabricated on$SiO_2$/glass substrate by a sol-gel dip coating method. The crystalline phase of the ATO thin film was identified as SnO$_2$ major phase and the film thickness was about 100 nm/layer at the withdrawal speed of 50 mm/minute. Optical transmittance and electrical resistivity of the 400 nm-thick ATO thin film which was annealed under nitrogen atmosphere were 84% and $5.0\times 10^{-3}\Omega \textrm{cm}$, respectively. It was found that the $SiO_2$ layer inhibited Na ion diffusion and the formation of impurities like $Na_2SnO_3$ or SnO while increasing Sb ion concentration and higher ratio of $Sb^{5+}/Sb^{3+}$in the film. Annealing at nitrogen atmosphere leads to the reduction of $Sn^{4+}$ as well as $Sb^{5+}$ resulting in decrease of the electrical resistivity of the film.

• Applied Chemistry for Engineering
• /
• v.17 no.4
• /
• pp.397-402
• /
• 2006

We have investigated the effect of each ingredient in the light diffusing film (LDF) which was used as backlight unit (BLU) of TFT-LCD TV on physical, electrical, thermal and optical properties of LDF. In anti-blocking layer, the excellent anti-blocking ability was obtained when 0.5~1.5 wt% of acrylic bead was added, and good decay-time and water-stability were shown when 0.8 wt% of tertiary ammonium salt was added. Optimal results for adhesion strength, curing rates and flexibility on the surface of PET film have been obtained in the light diffusing layer by using acrylic polyol as a binder resin, and by addition of 30~35 wt% non-yellowing type HDI crosslinker. In addition, the highest normal luminance value was obtained by addition of 250 wt% poly-dispersive polystyrene ($20{\mu}m$ PS) and polymethylmethacrylate ($20{\mu}m$ PMMA) beads into the binder resin (100 wt%). The higher normal luminance could be got for PMMA beads than PS beads because of the transmittance difference.

• Korean Journal of Food Science and Technology
• /
• v.29 no.2
• /
• pp.337-342
• /
• 1997

In order to compare methods of making a mead and a melomel, changes of alcohol contents, reducing sugar, soluble solids, pH and total acidity during fermentation of a mead and Japanese plum melomel was investigated. Fermentation rate of the melomel were much faster than the mead. Reducing sugar and soluble solids were continuously decreased until the 16th day of fermentation, while alcohol contents were increased continuously during the same period. After fermentation of 21 days, alcohol contents of the mead was reached 7.6%, while that of the Japanese plum melomel reached 12.4%. pH and total acidity were not changed considerably during the whole fermentation period. Clear honey wines with transmittance of 99.4% were obtained by membrane filtration. In conclusion, the method of making melomel using the osmotically extracted fruit juice with honey was found to be more advantageous than the method of making a simple mead.

• Korean Journal of Food Science and Technology
• /
• v.24 no.4
• /
• pp.347-352
• /
• 1992

Physicochemical properties of native and defatted nonwaxy(Dongjin byeo) and waxy(Sinseunchalbyeo) rice starches were investigated. The granule shapes of rice starches were polygonal and X-ray diffraction patterns were A types, but relative crystallinity was decreased by defatting. The amylose content of defatted starches slightly increased, but water binding capacity of defatted starches decreased. Swelling power and solubility of starches increased with the increase of temperature, at each temperature increased by defatting. Transmittance of Dongjinbyeo and Sinseunchalbyeo starch suspensions showed a rapid increase at $60{\sim}65^{\circ}C$, $55{\sim}60^{\circ}C$ respectively. The initial pasting temperature by amylograph of Dongjinbyeo and Sinseunchalbyeo starches were $66^{\circ}C$ and $64^{\circ}C$, respectively. The gelatinization temperature of defatted starches was higher than that of the nondefatted starches. Dongjinbyeo starch decreased peak viscosity and breakdown by defatting, but Sinseunchalbyeo starch unchanged.

• Korean Journal of Food Science and Technology
• /
• v.19 no.3
• /
• pp.245-249
• /
• 1987

Physicochemical properties of domestic millet starches were determined. Amylose contents of nonwaxy and waxy millet starches were 28.0 and 8.0%, respectively. The water binding capacity of nonwaxy millet starch was slightly higher than that of waxy millet starch. There was no recognizable difference on granule size between nonwaxy and waxy millet starch. Abrupt increases in swelling power over $80^{\circ}C$ of gelatinization temperature were characteristic features of millet starches. The initiation of increase in light penetration was started slightly earlier in case of waxy millet starch. Maximum viscosities of $6{\sim}7%$ nonwaxy and waxy millet starch were 300-460 and 800-1080 B.U., respectively. The conspicuous break-down was noticed in waxy millet starch.

• Journal of the Korean Vacuum Society
• /
• v.10 no.2
• /
• pp.213-218
• /
• 2001

ZnO and ZnO:In films were deposited on the glass substrates by a spray pyrolysis method. It is found that ZnO films were polycrystalline with the preferred orientation (002) and have a hexagonal structure with lattice constants of a=3.242 $\AA$ and c=5.237 $\AA$. The crystalline structure of ZnO:In films deposited at the In content of 0~6.03 at. % were the same as that of ZnO films, but its lattice constants was slightly larger than those of ZnO films. The relative atomic ratios of metal ion of ZnO:In films were in accordance with those of the spray solution within the experimental error. The minimum resistivity of and the maximum carrier concentration of 19.1 $\Omega\cdot\textrm{cm}$ and the maximum carrier concentration of $2.11\times10^{19}\textrm{cm}^{-3]$ obtained from the ZnO:In films when In content was 2.76 at. %. The optical transmission of the sample grown at the In content of 3.93 at. % was about 95% in the wavelength between 400 and 800 nm.