• Korean journal of food and cookery science
• /
• v.6 no.4 s.13
• /
• pp.33-39
• /
• 1990

Rice and waxy rice starches were adjusted to 27% of moisture and heated at $100^{\circ}C$ for 16hours, respectively. After the treatment, their gelatinization properties were investigated. The initial gelatinization temperature, obtained by transmittance and amylogram, of Akkibare and Taebaek starches were $60{\sim}65^{\circ}C$ but those of waxy rice and the U.S.A. rice starches were $55{\sim}60^{\circ}C$ and $70{\sim}75^{\circ}C$, respectively. The gelatinization temperatures of heat-moisture treated starches were higher than those of the untreated starches. Viscosities at each temperature and the highest viscosity reduced by some degrees after the treatment. DSC thermograms of all starches showed single endotherm and the gelatinization enthalpies were $2.26{\sim}2.63\;cal/g$. The gelatinization enthalpy tended to decrease after the treatment. Transmittance and viscosity by alkali showed in this order; Akkibare and Taebaek starches>waxy starch>the U.S.A. rice starch. The heat-moisture treated starches increased viscosities in every starch. Transmittance in alkali solution of Akkibare, Taebaek and waxy rice starches decreased. but that of the U.S.A. rice search increased.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.334-334
• /
• 2012

태양전지 기술은 우주 항공에서부터 핸드폰과 같은 소규모 가전 시설에까지 폭 넓게 사용되고 있다. 현재 태양전지 기술은 기존의 화석 에너지에 비해 효율 측면에서의 열세함으로 인해 변환 효율을 높이는 연구가 진행되고 있다. 태양전지의 기본 구조에서 고반사막을 대신하여 선택적 투과막을 채용하면 적외선 영역은 광흡수층으로 재반사시키고 가시광선 영역은 선택적으로 투과시킬 수 있기 때문에 태양전지의 변환 효율을 높임과 동시에 채광에 유리한 투명 태양전지를 얻을 수 있다. 본 연구에서는 반응성 분위기에서 AlTi 단일 타겟을 스퍼터링하여 유리 기판 위에 AlTiO 선택적 투과막을 형성하고 광학적 특성을 평가하였다. 기존의 연구에서 스퍼터링으로 형성한 AlTiO 선택적 투과막은 가시광선 영역에서 약 30%의 비교적 높은 반사율을 나타내었다. 이번 연구에서는 광학 두께를 조절함으로써 가시광선 영역에서 반사율이 평균 20% 이상 감소하고 적외선 영역에서 약 30% 이상의 반사율을 나타내는 선택적 투과막을 형성한 결과를 보고한다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.360.2-360.2
• /
• 2014

박막 태양전지의 변환효율을 높이기 위해 전면에는 반사방지막을, 후면에는 고반사막을 적용한다. 태양전지 구조에서 고반사막을 대신하여 선택적 투과막을 적용할 경우 가시광선은 투과하고 적외선은 광 흡수층으로 재반사되기 때문에 변환효율을 향상 시킬 수 있고 동시에 투명 태양전지를 얻을 수 있다. 선택적 투과 특성을 보이는 지르코니아 박막의 광학적 특성이 이미 보고된 바 있으며, 본 연구에서는 반응성 스퍼터링 방식을 이용하여 지르코니아 박막을 증착하고 산소 유량에 따른 광학적 특성을 관찰한 후 이를 통해 선택적 투과막 성장에 적합한 산소 유량 조건을 얻고자 하였다. 산소 유량에 따라 지르코니아 박막의 투과율은 400 nm 이상의 파장에서 약 10%에서 약 85%의 범위에서 변화하였고 반사율은 적외선 영역에서 최소 약 30%에서 최대 약 60%의 수치를 나타내었다. 이러한 결과로부터 반응성 스퍼터링 시 산소 유량이 지르코니아 박막의 광학적 특성 변화에 큰 영향을 미치는 인자임을 확인하였다.

• Journal of Bio-Environment Control
• /
• v.10 no.2
• /
• pp.80-87
• /
• 2001

This study was conducted to provide basic data for the design of shading facility of greenhouse. The proper distance between external shading screen and roof surface, transmissivity of shading materials, and shading effects of external and internal shadings were analyzed. About a distance of 10 cm between inclined external shading screen and roof surface was enough to guarantee the external shading effect in the greenhouse without roof vent. The inside temperature of greenhouse installed with 85% internal shading screen was lower the maximum of 4$^{\circ}C$ and mean of 2$^{\circ}C$ than that with 55% internal shading screen in both natural ventilation and no ventilation condition. The difference of soil temperature between shading and no shading greenhouse was great, but the difference by shading rate or shading method was small. The performance of external shading for controlling inside temperature down was superior to that of the internal shading. The externally inclined shading screen parallel to the roof surface of greenhouse was more effective than the externally horizontal shading screen in controlling inside temperature of greenhouse without roof vent.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.23 no.1
• /
• pp.59-66
• /
• 2021

This study aimed to a basic research for the development of dye-sensitized solar cells that the wavelength band required for crop growth is passed, and the wavelength band that is not necessary for crop growth can be used for the generation of electricity. The transmissivity according to the illuminance was about 10% higher in the Blue filter and the Green filter than in the Red filter, but the transmissivity according to the PPFD was about 10% higher in the Red filter and the Blue filter than in the Green filter. In addition, the greenhouse attached with 30% infrared blocking filter was predicted to have a lower air temperature than other greenhouses, but it was investigated that there was no significant difference. Therefore, it was investigated that the application of the infrared cut filter would not be appropriate in a greenhouse that controls the temperature by opening a window. As a result of investigating, it was found that the Green and Blue filter greenhouses had the severe overgrowth and the stems grew weaker. The fresh weight of paprika in the infrared blocking filter greenhouse was the highest at 678.9g, and the growth of Red filter and the control greenhouses was relatively poor. Photosynthetic rate, amount of transpiration, and stomatal conductivity were the infrared blocking filter and control greenhouse higher than others. On the other hand, the water use efficiency did not show a big difference.

• Journal of Korean Ophthalmic Optics Society
• /
• v.14 no.1
• /
• pp.47-56
• /
• 2009

Purpose: To find optimized luminosity factor of color from light transmission filter. Methods: To make $Y_{1-x}G_{x}$, $Y_{1-x}P_{x}$ by using CR-39 compound within dipping method, mixing up Y(Yellow), G(green) and P(pink) for optimize eye sensitivity. Modeling for relative luminous efficiency(relative sensitivity) curves in Luminose transmission, it could be resolved by Multiplying sensitivity of eye within transmission rate of Lens ($P_f({\lambda}=T({\lambda}){\cdot}P({\lambda}).)$.). To evaluate Wavelength between 400~700 nm, relative luminous efficiency curve in Area and Height value is being used. Results: In color filter of $Y_{1-x}G_{x}$ position of x equals to 0.04, 0.1, 0.08, 0.12, 0.14, 0.5 at ${\beta}=S_1/S_0{\cdot}100$ each consist value of 76.1, 77.9, 80.7, 81.6, 80.2, 18.6 In color filter of $Y_{1-x}P_{x}$ position of x equals to 1.00, 0.2, 0.6, 0.8 at ${\beta}=S_1/S_0{\cdot}100$ each consist value of 74.3, 74.0, 70.5, 33.0 The result from experiment $Y_{1-x}P_{x}$ value less than $Y_{1-x}G_{x}$, from evaluating luminous efficiency curve and test was successfully optimized. Conclusions: Optimized relative luminous efficiency curve result have value of X=0.12-0.14 at $Y_{1-x}G_{x}$.

• Journal of the Korean Vacuum Society
• /
• v.3 no.2
• /
• pp.203-206
• /
• 1994

동시증착법으로 성장한 CuIn3Se5 박막의 구조 및 광학적 특성을 XRD, SEM 광투과 및 광반사 측정으로부터 조사하였다. XRD 측정에 의하면 CuIn3Se5 는 정열된 Cu 빈자리와 Cuqls자리에 in으로 대 치되는 defect chalcopyrite 구조임이 확인디었다. 또한 광흡수 측정으로부터 CuIn3Se5 는 금지대내에서 직접 전이에 의한 광흡수 특성을 보여주며 이때 에너지띠 간격은 1.27ev 이었다. CuIn3Se5 박막에 대한 연구결과들은 CuInSe2 의 결과들과 비교하여 논의하였다.

• Journal of the Korean Ceramic Society
• /
• v.41 no.10 s.269
• /
• pp.766-770
• /
• 2004

High-transmittance film was coated by using spherical silica nano colloids. Silica colloid sol was preservred between two inclined slide glasses by capillary force, and particles were stacked to form a film onto the substrate as the upper glass was sliding. As the sliding speed increased, the thickness of the film decreased and light transmittance varied. The microstructure observed by SEM showed that silica particles were nearly close packed, which enabled the calculation of the effective refractive index of the film. The film thickness calculated from the wavelength of maximum transmittance and the effective refractive index was well coincided with the thickness observed by SEM and measured by profiler. The maximum transmittance of $94.7\%$ was obtained. This means that $97.4\%$ of transmittance or $1.3\%$ of reflectance can be achieved by simple process if both sides of the substrate are coated.

• Journal of IKEEE
• /
• v.23 no.4
• /
• pp.1224-1229
• /
• 2019

In this study, a liquid crystal (LC) cell was manufactured for smart window applications, such as blinds, and a system for controlling the light transmission rate was developed. The threshold voltage of the LC cell was 1.325 V and when the transmission rate was 10%, the voltage showed 2.370 V, indicating that the LC cell manufactured is driven at low voltage. The LC cell also operated reliably after being heated for 10 min at 80℃. with a response time of less than 30ms. The operation system designed the applied voltage of the LC cell with a interval of about 0.5 V from 0.15 V to 3.53 V and confirmed that the light transmission rate of the LC varies depending on the actual applied voltage. These results suggest that LC cells are likely to be smart window applications.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.426.2-426.2
• /
• 2014

Wavefront control은 렌즈, 거울 등을 포함한 많은 광학소자를 대체할 수 있는 기술이며, 이는 광 직접 소자 개발에 매우 유용하다. 기존의 Distributed bragg reflector (DBR) 구조의 경우 lattice mismatch, 낮은 효율, 작은 굴절률 차이의 물질만을 사용해야 하는 문제 등으로 광 직접 소자에의 적용에는 한계가 있다. 본 연구에서는 이러한 한계점을 극복하고, 더 나아가 광학소자 구조 내에서의 빛의 거동을 조절하기 위해서 High-index contrast grating (HCG), 즉, 큰 굴절률 차이가 나는 물질로 이루어진 격자 구조 내의 빛이 가지는 waveguide 특성에 대한 연구가 수행되었다. 굴절률 차이가 큰 물질을 sub-wavelength의 주기적인 혹은 비주기적인 격자 구조로 만듦으로써 투과된 빛의 투과도와 위상 등을 조절할 수 있고 이를 통해 빛의 초점 거리, 휘어짐을 조절 할 수 있다. HCG 구조 내의 빛의 거동을 Rigorous coupled wave analysis (RCWA) 및 Finite element method (FEM) 계산을 이용하여 시뮬레이션 하였다. RCWA 계산을 통해 주기 격자구조의 투과도 및 반사도, 빛의 위상을 계산하여 비주기를 갖는 전체적인 HCG 구조를 결정하였고, FEM 계산을 통하여 그 구조 내에서 빛의 거동을 시뮬레이션 하였다. 1,300 nm 파장의 빛이 광원으로 사용되었고 시뮬레이션을 위해 낮은 굴절률의 물질로 ITO, 높은 굴절률의 물질로는 Si이 사용되었다. $15{\mu}m$ 포커싱, $7.91^{\circ}$의 휘어짐을 시뮬레이션 하였고, 실제 소자 공정을 하여 제작한 후, 광 측정 결과 포커싱은 $15{\mu}m$, 휘어짐은 $4.5{\sim}6.5^{\circ}$를 확인하였다. 이러한 결과를 바탕으로 HCG구조체를 통하여 빛의 엔지니어링이 가능함을 알 수 있었다. HCG구조체는 빛이 투과하는 광학 소자의 전반에 적용이 가능하며 더 나아가 인위적인 빛의 엔지니어링이 가능함을 시사한다.