• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.3
• /
• pp.541-547
• /
• 2017

In Yongwon channel, its natural flow of seawater is blocked by the construction of Busan Newport including the container berth. The channel was transformed into a narrow and long one, where it is possible that ships are only allowed to pass through the north-side channel of Gyeonmado located at the point of river mouth to Songjeongcheon. So it is considered that the changes in the terrain characteristics of Yongwon channel is likely to alter the circulation of sea water, thereby changing its water quality. Contaminants are accumulated from the sediment release. In this study, before and after dredging the sediment release test was performed. As a result, after the sediment dredging is performed, the reduction rate was higher at the same point. The results show that the water quality can be improved by dredging. Each group (A~C) reduction rate of the evaluation of the reduction rate of 4.64% T-N, 18.00%, 18.59%, respectively. T-P rate of 24.75% reduction, 24.17%, 44.08%, respectively. COD reduction rate was 18.57%, 19.76%, 38.08%, respectively. These results can be used as basic data for controlling the contamination by dredging in Yongwon channel.

• Journal of the Korean GEO-environmental Society
• /
• v.21 no.3
• /
• pp.13-21
• /
• 2020

The purpose of this study is to evaluate the concentrations of heavy metals in the marine sediments near the Masan bay and the Nakdong estuary, and to investigate the pollution intensity levels of six heavy metals using the existing pollution intensity assessment method. According to the US environmental protection agency, in the case of Cu, the B1 area was classified as severe pollution, while in Ni and Zn, it was classified as moderate pollution in some areas. According to the classification of Igeo, EF and PERF, the A and B regions were polluted by Cd. In particular, in the B1 region, Igeo, EF, and PERF values were the highest in all regions, and were regarded as serious pollution. According to the mean PEL quotient classification, which takes into account the effects of all six heavy metals, there is a 21% probability of toxicity from heavy metals in all regions. The highest concentration of Cd in the B1 region is 1.5 mg/kg. Therefore, the contamination of Cd contained in sediment near Masan Bay is serious, so it is necessary to clarify the cause and take careful approach to future treatment.

• Korean Journal of Microbiology
• /
• v.30 no.5
• /
• pp.366-370
• /
• 1992

Sediment samples were collected from the stations 0101-0921 located between N $32^{\circ}$30'~$34^{\circ}$30' and E $123^{\circ}$30'-$128^{\circ}$30' during July 31-August lO. 1988. The distributions of total heterotrophic bacteria, freshwater bacteria and hydrocarbon degrading bacteria were studied. Each bacterial distribution was in the range of $3{\times}10^{5}~9.2{\times}10^{6}CFU/cm^{3}$sediment, $3{\times}10^{3}~2.1{\times}10^{6}CFU/cm^{3}$ sediment and $2{\times}10^{4}~6.2{\times}10^{6}CFU/cm^{3}$ sediment. respectively. The percent of hydrocarbon degrading bacteria against total heterotrophic bacteria was 0.7-73,2 % which was much higher than other marine sediments reported. These values were statistically analyzed with the percent of freshwater bacteria against total heterotrophic bacteria. These two parameters were well correlated with the correlation coefficient r= 0.60058 (n=34) and P=0.OOO2. This means that the distributions of hydrocarbon degrading bacteria and freshwater bacteria in the research area were affected together by the fresh water discharge into the sea environment. Therefore it can be concluded that the distribution of hydrocarbon degrading bacteria in the sediment of South Sea was affected by petroleum hydrocarbon input from terrestrial region through rivers.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.11
• /
• pp.834-846
• /
• 2011

The objective of this study is to development of IDFIS system, that are consisted of hydrocyclone, rapid flocculation and inclined settler with chitosan coagulant. As the results of Jar test, a chitosan optimum dosage of 40 mg/L for river sediment, and 5 mg/L for tunnelling wastewater sediment, which these conditions leaves of residual turbidity of less than 5 NTU. Because of the effectiveness of chitosan in removing turbidity was independent on pH, the operation of IDFIS system would be simple. The synthesized turbidity was made with clay particles, river sediment, river suspended sediment, and tunnelling wastewater sediment. Results indicate that the mean overall removal efficiency of turbidity, SS, COD and TP were 98%, 99%, 85% and 95%, respectively. Chitosan is very efficient in removing turbidity in the entire turbidity range examined. IDFIS system would have possibility with compact design, because of the increase of floc size favours the floc settling speed and reduces the settling time.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.6 no.4
• /
• pp.249-258
• /
• 2001

Compressional wave velocity and electrical resistivity of muddy sediments in the southeastern inner shelf of Korea were studied using nine piston core samples. The acoustic and physical properties were measured with 10 cm depth interval. Sediment structures were examined by x-radiographs of the cored sediments. Subbottom profiles were obtained by a high-resolution acoustic subbottom profiler. Acoustic turbid layers are clearly seen on the profiles, and x-radiographs of the sediments showed degassying structures formed by gas escaping. On the basis of x-radiographic images, velocities, electrical resistivities and physical properties, the sediments are divided into gassy and non-gassy sediments. The presence of gas and degassying structures result in a marked variation in velocity and electrical resistivity. It can be concluded that velocity and electrical resistivity arep arameter to recognize gassy sediment. The velocity is important parameter to indicate gassy sediment.

• Journal of the Mineralogical Society of Korea
• /
• v.27 no.3
• /
• pp.107-114
• /
• 2014

In this study, we tried to determine the origin of fine-grained sediments in Southeastern Yellow Sea Mud patch (SEYSM) using principal component analysis coupled with semi-quantitative X-ray diffraction analysis for 4 major clay minerals. We used 51 marine surface sediments from SEYSM and 33 surface sediments of rivers flowing into the Yellow Sea. We made bioplot diagram using R program with principal component 1 and component 2 because the two components might contain about 98% of all data. The content of each clay mineral in the south and north regions of SEYSM are almost similar. In the biplot, SEYSM sediments distribute close to Korean rivers sediments than Huanghe and Changjiang sediments. Based on these results, we suggest that SEYSM is originated from the Korean rivers sediments. The higher accumulation rate in the SEYSM compared to the sediment discharge from neighboring Korean rivers can be explained by erosion and reworking of surface sediments in this area. The principal component analysis can be used for the provenance research of marine sediments around the Korean Peninsula.

• The Journal of Engineering Geology
• /
• v.24 no.1
• /
• pp.9-21
• /
• 2014

We examined high-resolution seismic data, side scan sonar data, surface sediments, and vibrocore samples from a sand ridge off the western part of Dukjuk-Do in Gyeonggi Bay, with the aim of interpretation of seismic stratigraphy and sedimentary environment. Based on the seismic data, the deposited sands are divided into three sedimentary units. 14C age data indicate that the top sequence (sequence I) formed at 5000-6000 yr BP, when a transgression resulted in strong shifting tides. Analyses of the vibrocore samples indicate that sequence II is a paleo-mudflat layer of intertidal sediments dominated by mud. Sequence III consists of terrestrial sediments that are presumed to have been deposited at the end of the Pleistocene, unconformably overlying the acoustic bedrock and Mesozoic granite. The side scan sonar data indicate that sand waves were formed on the seabed on top of the sand ridge. Generally, this is the direction of $N20^{\circ}E$, which coincides with the direction of tidal flow. Sand ripples occur away from the top of the sand ridge and are distributed homogeneously across a sandy slope. Vibrocore analyses indicate that the surface sediments and core sediments (samples VC-1, -2, and -3) are homogeneous, without any internal structures, and are characterized by a mixture of medium and fine sand (1-$2{\phi}$), respectively.

• Korean Journal of Soil Science and Fertilizer
• /
• v.31
• /
• pp.36-44
• /
• 1998

우리 나라에서 토양의 점토광물에 관한 최초의 연구는 1958년 김제지방의 답 토양에 관한 연구로 (Dewan, 1958)시작되었다. 1960년대 시작하여 1970년대 까지는 주로 토양점토광물의 동정이 이루어 졌다. 점토광물의 동정(同定)에 사용된 잔적토(殘積土)(Residual Soil)로는 화강암(花崗岩), 화강편마암(花崗片麻岩), 현무암(玄武岩), 석회암(石灰岩), 혈암(頁岩), 제(第)3기층(紀層), 홍적층(洪積層) 유래 토양과 토양종류별(土壤種類別)로는 과부식회색토(寡腐植灰色土), 염류토(鹽類土), 충적토(沖積土), 적황색토(赤黃色土), 화산회토(火山灰土), 퇴적토(堆積土), 갈색토(褐色土), 암쇄토(岩碎土), 저위생산답(低位生産畓)이였으며, 토양점토광물(土壤粘土鑛物)과 작물수량성(作物收量性) 관계에 관한 연구가 실시되었다. 1980년대에 들어와서는 토양중의 1차광물과 점토광물의 풍화에 대한 안정도와 1차광물의 동정이 행해졌으며, 이밖에 Kaolinite 입자의 전하에 관한 연구등 점토광물의 흡착과 활성 연구, 점토광물의 토양개량재로서의 흡착과 화학적 특성 변화 연구와 점토광물의 토양개량 시용효과에 관한 연구가 행해졌다. 1990년대에 들어와서는 토양 중의 1차광물과 점토광물의 정량에 대한 자료가 축척되었고, 토양의 풍화에 대한 안정성과 생성기작, Zeolite와 새로운 광물이 합성되었다. 또한 합성광물을 이용한 농업과 산업광물로의 응용성 환경 산업에서의 적용가능성에 대한 평가가 시도되었다. 토양의 점토광물의 조성에 관한 연구는 토양 모재를 중심으로 이루어졌는데, 화강암(花崗岩)에서는 Halloysite, 화강편마암(花崗片麻岩)에서는 Kaolinite, Metahalloysite, Illite, 산성암(酸性岩)에서는 Kaolinite, Venrmiculite와 Chlorite의 중간광물, 현무암(玄武岩)에서는 Illite, Kaolinite, Vermiculite, 석회암(石灰岩)에서는 Vermiculite-Chlorite 중간광물, Kaolinite와 Illite, 혈암(頁岩)에서는 Kaolinite, Halloysite, Illite 외 Vermiculite-Chlorite, 화산회토(火山灰土)에서는 Allophane이 주광물이었다. Soil Taxonomy와 토양광물과의 관계에서, 답 토양에서는 Entisols의 주점토광물은 2:1형과 1:1형 광물이지만 Inceptisols와 Alfisols에서는 Halloysite가 대부분이다. 밭 토양의 경우는 Alfisols의 주점토광물은 Vermiculite, Illite, Kaolinite이었고, Ultisols에서는 Vermiculite-Chlorite 중간광물이었다. 산림토양에서는 Inceptisols중에서 Andept는 Allophane, Alfisols에서는 2:1 광물이지만, Ultisols에서는 Halloysite이다. 모재별 조암 광물의 풍화와 점토광물의 생성과정에서 화강암(花崗岩)과 화강편마암(花崗片麻岩)의 장석류(長石類)는 kaoline광물로, 이 밖의 운모광물(雲母鑛物), 녹니석(綠泥石), 각섬석(角閃石), 휘석(輝石)으로부터 생성된 illite, chlorite, vermiculite는 풍화중간에 혼층단계(混層段階)를 거쳐서 kaoline 광물로 풍화된다. 석회암(石灰岩) 토양의 smectite가 Mg농도가 높은 토양용액으로부터 침전되어 생성되었거나 운모 또는 chlorite에서 유래된 vermiculite의 변성작용에 의해 생성되고, 혈암(頁岩)토양의 점토에 illite가 주로 풍화에 저항성이 큰 미립자의 함수백운모(含水白雲母)로부터 유래되며, 현무암(玄武岩) 중의 장석류(長石類)는 kaoline광물로, 휘석(輝石)은 chlorite${\rightarrow}$illite의 풍화과정을 거친다. Zeolite, 함불석 Bentonite, Bentonite 등 우량점토 광물이 분포과 광물조성, 이화학적 특성이 조사되었고, 토양의 물리적, 화학적 성질의 개선을 필요로 하는 토양의 개량을 위해서 Bentonite, Zeolite, Vermiculite 등의 토양 개량재(改良材)로서의 기초연구와 이들 개량재 시용효과에 관한 연구 등이 주로 논토양에서 수행되었다. 점토광물과 수량관계를 보면 Montmorillonite를 주점토광물로 함유된 답 토양의 수도수량이 1:1 광물을 주점토광물로 함유하고 있는 토양에서의 수도수량 보다 높았다. 토양광물에 관한 기초연구(基礎硏究)로서 양이온교환능과 포화이온의 영향, 입자의 전기화학적 성질, 흡탈착 성질, 표면적과 등전점, 해성점토에 대한 압밀점토(壓密粘土)의 변형율(變形率)의 추정 등이 주로 연구되었다. 부가가치가 낮거나 폐기되는 광물을 이용하여 토양개량재 혹은 흡착제를 형성하는 연구가 알카리 처리에 의한 Zeolite 합성에 집중되었다.

• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2015.11a
• /
• pp.162-165
• /
• 2015

본 연구는 ${\bigcirc}{\bigcirc}$ 공구 공유수면 매립공사 수행 중에 매립토량의 부족이 발생함에 따라 이를 대상으로 원인을 분석하고자 수행하였다. 매립지의 토량부족 원인을 파악하기 위해 설계 및 계측자료를 수집하여 시공 현황을 파악하고 지반조사를 통해 해안지역과 매립지반의 시료를 채취하여 성상분석과 원지반에 대한 공학적 특성을 비교 검토하였다. 특히. 현장 시추조사에 의한 경계면 분석과 토질 종류를 점성토, 사질토, 부유토로 구분하고 침하량 공식에 따라 발생량을 산출하였다. 구역의 구분은 설계 시와 동일한 조건에서 침하량을 계산하였고 설계 시 지반고가 침식과 퇴적으로 인해 일부 변경되어 설계시 지반고와 착공시 지반고를 구분하여 기재하고 각각의 침하량을 비교하였다.

• The Journal of Engineering Geology
• /
• v.22 no.3
• /
• pp.293-307
• /
• 2012

Shear wave velocity is commonly invoked in explaining geophysical phenomena and in solving geotechnical engineering problems. In particular, the importance of shear wave velocity in geotechnical earthquake engineering has been widely recognized for seismic design and seismic performance evaluation. In the present study, various insitu seismic tests were performed to evaluate geotechnical dynamic characteristics at 183 sites in Korea, and shear wave velocity profiles with depth were determined to be representative of the dynamic properties at the investigated sites. Subsurface soil and rock layers at the target sites were reclassified into five geotechnical layers: fill, alluvial soil, weathered soil, weathered rock, and bedrock, taking into account their general uses in geotechnical earthquake engineering practice. Average shear wave velocity profiles for the five geotechnical layers were obtained by synthesizing the shear wave velocity profiles from seismic tests in the field. Based on the profiles, a representative shear wave velocity value was determined for each layer, for use in engineering seismology and geotechnical earthquake engineering.