• Economic and Environmental Geology
• /
• v.46 no.1
• /
• pp.51-61
• /
• 2013

Researches on the oil recovery enhancement using the nanotechnology has recently been studied in the United States. The previous researches has focused mainly on the flow characteristics of nanoparticles in porous media, and the stability of the nano-emulsion itself. However, the analysis did not deal with the size effects between a nano-emulsion and the pore size which has an important role when nano-emulsion flows in the porous media. In this research, nano-based emulsion was fabricated which is able to be applied for the enhanced oil recovery techniques and its characteristics was analyzed. In addition, in order to identify the characteristics of nano-emulsions flowing through the porous media, the size effect was analysed by filtering test. According to the results, when the emulsion was fabricated, SCA(Silane Coupling Agent) or PVA(Poly Vinyl Alcohol) are added to improve the stability of emulsion. As the ratio of the decane to water increased, the viscosity of emulsion and the droplet size also increased. For the filtering test at the atmospheric conditions, the droplet did not go through the filter; only the separated water from the emulsion was able to be filtered. This phenomenon occurred because the droplet was not able to overcome the capillary pressure. At the filtering test by suction pressure, most of the emulsion was filtered over the filter size of $60{\mu}m$. However, the ratio of filtration was rapidly degraded at less than $45{\mu}m$ filters. This is caused due to deformation and destruction of the droplet by strong shear stress when passing through the pore. The results from the study on the basic characteristic of nano-emulsion and filtering test will be expected to play as the important role for the fabrication of the stable nano-emulsion or the research on the recovery of residual oil in porous media.

• Korean Journal of Environmental Agriculture
• /
• v.21 no.1
• /
• pp.7-16
• /
• 2002

Contamination of groundwater by agrochemicals used in the regional-scale Is now a major environmental problem, and this is especially true for Cheju island where virtually all potable water is from groundwater. The objective of this study was to assess leaching potential of eight pesticides in soils of citrus orchards using groundwater ubiquity score (GUS), retardation factor (RF) and attenuation factor (AF). Considering GUS estimated in 30 citrus orchard soils, metribuzin and metolachlor were classified as leacher, alachlor in volcanic ash soils and linuron in non-volcanic soils were classified as leacher, but chlorothalonil and chlorpyrifos were classified as non-leacher. For RF values, metribuzin was classified to be mobile in soils of low organic carbon, metolachlor and alachlor were classified to be moderately immobile in most soils, but linuron, diuron, diniconazole, chlorothalonil and chlorpyrifos were all classified to be very immobile. For AF values, diniconazole, chlorothalonil, and chlorpyrifos were classified to be very unlikely leachable in all of the soils, metribuzin was classified to be likely leachable, and metolahclor, alachlor, linuron and diuron were classified to be leachable only in non-volcanic soils. Although there were some variations in the relative potential of teachability of pesticides estimated with the three different indices, the ranking was essentially determined on the base of the intrinsic properties of the chemicals and environmental properties. Among the eight pesticides, metribuzin, metolachlor, and alachlor, which have high water solubility and low $K_{oc}$ values, have a significant leaching potential especially in non-volcanic ash soils of low organic carbon. But diniconazole, chlorothalonil, and chlorpyrifos, which have low water solubility and high $K_{oc}$ values, were classified to be very immobile in all of the soils. Therefore, to lower the possibility of pesticide contamination of the groundwater in Cheju island, those pesticides which have high water solubility and low $K_{oc}$ values should be used with care in soils of low organic carbon including non-volcanic ash soils.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.16 no.2
• /
• pp.183-193
• /
• 2018

Currently, the Korea Atomic Energy Research Institute (KAERI) is planning to build the Ki-Jang Research Reactor (KJRR) in Ki-Jang, Busan. It is important to safely dispose of low-level radioactive waste from the operation of the reactor. The most efficient way to treat radioactive waste is cement solidification. For a radioactive waste disposal facility, cement solidification is performed based on specific waste acceptance criteria such as compressive strength, free-standing water, immersion and leaching tests. Above all, the leaching test is important to final disposal. The leakage of radioactive waste such as $^{137}Cs$ causes not only regional problems but also serious global ones. The cement solidification method is simple, and cheaper than other solidification methods, but has a lower leaching resistance. Thus, this study was focused on the development of cement solidification for an enhancement of cesium leaching resistance. We used Zeolite and Loess to improve the cesium leaching resistance of KJRR cement solidification containing simulated KJRR liquid waste. Based on an SEM-EDS spectrum analysis, we confirmed that Zeolite and Loess successfully isolated KJRR cement solidification. A leaching test was carried out according to the ANS 16.1 test method. The ANS 16.1 test is performed to analyze cesium ion concentration in leachate of KJRR cement for 90 days. Thus, a leaching test was carried out using simulated KJRR liquid waste containing $3000mg{\cdot}L^{-1}$ of cesium for 90 days. KJRR cement solidification with Zeolite and Loess led to cesium leaching resistance values that were 27.90% and 21.08% higher than the control values. In addition, in several tests such as free-standing water, compressive strength, immersion, and leaching tests, all KJRR cement solidification met the waste acceptance or satisfied the waste acceptance criteria for final disposal.

• Applied Biological Chemistry
• /
• v.22 no.3
• /
• pp.181-189
• /
• 1979

In order to establish fertilizing technique for the increase of grain yield and its stability, the total absorbed amount of nutrients and nutritional status of rice plants at different growth stages were studied with respect to the nutrient contents and its relation to grain yield and yield components. This experiment was carried at three different level of nitrogen fertilization; two different seeding and transplanting times, and eight cultivars including both Japonica-and Tongil-type. The results of a part of these experiments are summarized as fallows: 1. The culm length tended to Increase with increasing fertilizer amount, but no significant difference between ordinary and heavy fertilization was observed in Tongil-type cultivars. 2. The panicle length was some what longer in ordinary and heavy fertilization than non-fertilization. 3. As the N-fertilizer level increases, the number of panicles per plant increased with higher response in Japonica-type cultivars than in Tongil-type cultivars. 4. The number of grains per panicle increased significantly in ordinary and heavy fertilization, compared to non-fertilization, but the difference in grain number per panicle among fertilizer treatment was smaller in Japonica-type cultivars than Tongil-type. 5. The 1,000 grains weight showed no significant difference among fertilization levels in ordinary transplanting, but indicated gradual decreasing tendency as the transplanting delayed. 6. In percentage of ripeness, there was no significant difference in ordinary transplanting, but hightly significant in late transplanting among N-fertilization levels and cultivars. 7. In yield, highly significant difference was shown among N-fertilizer levels and cultivars In Tongil-type variety, higher yield was obtained in ordinary fertilization than heavy fertilization. 8. The straw weight showed the tendency to increase in higher nitrogen level, but no significant difference between ordinaly and heavy fertilization was observed in Tonsil-type cultivars.

• The Journal of Korean Orthopaedic Ultrasound Society
• /
• v.7 no.1
• /
• pp.33-38
• /
• 2014

Purpose: To determine the therapeutic effectiveness of ultrasound-guided medial branch block (MBB) for the herniated lumbar disc patients who did not relieve their symptoms after percutaneous epidural neuroplasty (PEN). Materials and Methods: From August 2011 to February 2013, 559 patients with herniated lumbar disc have undergone PEN. Among them, ultrasound-guided MBBs were performed for the patients who had sustained low back pain and refered pain to lower extremities. Eighty eight patients were followed at 1 month and 39 patients could be followed at 6 month. All procedures have been performed by the one operator, and 23 G, 10 cm needle was placed and 0.5% lidocaine was injected under ultrasound guide. To target medial branches from L1 to L5, the groove at the root of transverse process and the base of superior articular process has been identified on transverse scan. Patients were evaluated by Visual Analog Scale (VAS) and Oswestry Disability Index (ODI) at each follow-up. Significant pain relief was described as a 50% or more reduction in VAS and significant improvement in function was described as at least a 40% reduction in ODI. Results: VAS showed that preprocedure pain ($7.35{\pm}1.68$; $mean{\pm}SD$) significantly decreased 1 month after block ($3.36{\pm}2.98$) and 6 month ($3.05{\pm}2.27$) (p<0.05). ODI also showed that preprocedure score ($32.82{\pm}8.77$) significantly decreased at 1 month ($15.14{\pm}14.01$) and 6 month ($12.97{\pm}8.82$) (p<0.05). Significant pain relief was observed in 64.49% at 1 month and 64.10% at 6 month. Significant functional improvement in 59.81% at 1 month and 61.54% at 6 month. Conclusion: Ultrasound-guided medial branch block may sufficiently treat the facet problems secondary from disc disease.

• Journal of Navigation and Port Research
• /
• v.26 no.3
• /
• pp.323-328
• /
• 2002

Soil-steel structures have been used for the underpass, or drainage systems in the road embankment. This type of structures sustain external load using the correlations with the steel wall and engineered backfill materials. Buried flexible conduits made of corrugated steel plates for the coastal road was tested under vehicle loading to investigate the effects of live load. Testing conduits was a circular structure with a diameter of 6.25m. Live-load tests were conducted on two sections, one of which an attempt was made to reinforce the soil cover with the two layers of geo-gird. Hoop fiber strains of corrugated plate, normal earth pressures exerted outside the structure, and deformations of structure were instrumented during the tests. This paper describes the measured static and dynamic load responses of structure. Wall thrust by vehicle loads increased mainly at the crown and shoulder part of the conduit. However additional bending moment by vehicle loads was neglectable. The effectiveness of geogrid-reinforced soil cover on reducing hoop thrust is also discussed based on the measurements in two sections of the structure. The maximum thrusts at the section with geogrid-reinforced soil cover was 85-92% of those with un-reinforced soil cover in the static load tests of the circular structure; this confirms the beneficial effect of soil cover reinforcement on reducing the hoop thrust. However, it was revealed that the two layers of geogrid had no effect on reducing the overburden pressure at the crown level of structure. The obtained values of DLA decrease approximately in proportion to the increase in soil cover from 0.9m to 1.5m. These values are about 1.2-1.4 times higher than those specified in CHBDC.

• Journal of Chest Surgery
• /
• v.32 no.9
• /
• pp.806-812
• /
• 1999

Background: Selection of reconstruction route in esophageal cancer surgery is based on the patient's status, characteristics of tumor, surgeon's preference and experience. Of the various routes, it has been documented that subcutaneous or substernal route may prolong operation time and may be vulnerable to postoperative respiratory complications. This study was designed to evaluate whether the selection of reconstruction route affects the surgical outcomes. Material and Method: Of 131 patients who have undergone resection and reconstruction for esophageal cancer, posterior mediastinal route(Group I, n=34), substernal route (Group II, n=31), and subcutaneous route(Group III, n=21) were retrospectively reviewed in 86 patients. Results of early operations and morbidities were compared between the groups. Result: There was a male prevalence(79 of males vs. 7 of females). There were 81 squamous cell cancers and 5 adenocarcinomas. There were no differences between groups in weight, height, age, cancer staging and location, and in the preoperative anesthetic risk evaluation and pulmonary function test(p=NS). Postoperative mechanical ventilation time was longer in Group I(20.6 hours) than in Group II(7.8 hours) or III(3.4 hours)(p=0.005). Duration of stay in the intensive care unit was prolonged in Group III(6.4 days) compared to Group I (3.9 days) or II(3.1 days)(p=0.043). No differences were noted in the duration of hospital stay between the groups(p=NS). Blood transfusion was needed in 30 out of 34 patients in Group I compared to 14/31 in Group II or 15/21 in Group III(p=0.001). The mean amount of transfusion for each patient was also higher in Group I(3,833 mL) than in Group II(1535 mL) or Group III(1419 mL)(p=0.04), but there was no difference in the inreoperation due to bleeding. Ea ly mortality rate was substantially higher in Group I(17.6%) but the differences between the groups were insignificant(p=NS). Although sepsis was a more prevalent cause of death in Group I, it was not related to anastomotic leak. Other morbidities did not differ between the groups(p=NS). Conclusion: In above results show that the reconstruction route does not affect the outcome of esophageal cancer surgery. We believe that the selection of reconstruction route can be based on the surgeon's preference and experience.

• Korean Journal of Soil Science and Fertilizer
• /
• v.33 no.2
• /
• pp.71-78
• /
• 2000

Preferential flow has recently been the subject of increasing interest because these phenomena contribute to solute transport in soils. Commonly, preferential flow paths are associated with macropores or highly structured soils. We presented an analysis of the measured breakthrough curves (BTCs) of $Cl^-$ and $Cu^{2+}$ ions to test the occurrence of preferential flow in soils using miscible displacement technique under steady flow conditions. We also analyzed soil water retention curves and from this curves induced cumulative pore size distribution of undisturbed soils, which sampled from Ap1, B1, and C horizons of Songjeong series soils (the fine loamy, mesic family of Typic Hapludults). In this study, miscible displacement experiment on C horizon was excluded, because it is structureless sandy loam with saturated hydraulic conductivity of $5.2cmhr^{-1}$. The saturated hydraulic conductivity of Ap1 horizon was $2.0cmhr^{-1}$, which was about 7 times higher than that of B1 horizon ($0.27cm hr^{-1}$). Cumulative pore size distribution predicted that Ap1 horizon had more macropores (pore diameter larger than $49{\mu}m$, equivalent to -6 kpa of soil matric potential) than B1 horizon. The hydrodynamic dispersion coefficient from chloride BTCs was estimated as $1.3cm^2hr^{-1}$ for B1 and $34cm^2hr^{-1}$ for Ap1 horizon. However the retardation factors of B1 and Ap1 horizon were significantly different, i.e. 1 and 0.6, respectively, which means that there was distinct partition between mobile water and immobile phase in Ap1 horizon. The copper retardation effect of Ap1 horizon was less than that of B1 horizon, even though cation exchange capacity of Ap1 horizon was higher than that of B1 horizon. Thus, breakthrough curves of $Cl^-$ and $Cu^{2+}$ obviously showed the probability that preferential flow would occur in Ap1 horizon.

• Korean Journal of Soil Science and Fertilizer
• /
• v.39 no.5
• /
• pp.292-297
• /
• 2006

A research was carried out to investigate the release pattern of slow release nitrogen fertilizer compound(SRNC) that is latex coated urea(LCU) and to recommend the application rate of the fertilizer at dry seeding rice culture in Honam plain area. The experiment was conducted at experimental field(Jeonbug series, fine silty, mixed, nonacid, mesic family of Fluvaquentic Endoaquepts) of National Honam Agricultural Research Institute. A medium late maturing rice variety (Dongjinbyeo) was seeded at the rate of $60kg\;ha^{-1}$ by drill seeder on April 1, 1997 and March 30, 1998. Fertilizer application rate was $160-90-110kg\;ha^{-1}$ for $N-P_2O_5-K_2O$. Soil ammonium nitrate($NH_4-N$) contents remained higher in all SRNC plots than conventional ones and higher with the increase of SRNC application rate until panicle formation stage, but the contents was higher in the conventional than NRNC plots at the heading stage. The plant hight was taller in SRNC than conventional plots until maximum tiller stage, but became similar in both conventional and SRNC plots at heading stage. The culm and panicle number was greater in SRNC than conventional plots throughout all growth stage, but the effective tiller rate was higher in conventional ones. Nitrogen efficiency was higher in the SRNC than conventional plots, but the efficiency was decreasing with the higher SRNC level. The spikelet number per unit area was greater in SRNC than conventional plots, and increased with higher SRNC level. The more spikelet number with higher NRNC level resulted in lower 1,000-grain weight. The rice yield in conventional plot was similar with only 60% SRNC level, but lower than 80% and 100% SRNC levels. However, slight lodging was observed in 100% SRNC level. In conclusions, we recommend NRNC application level as 80% of standard nitrogen application for early dry seeding culture of rice Honam plain area.

• Korean Journal of Soil Science and Fertilizer
• /
• v.41 no.2
• /
• pp.103-111
• /
• 2008

This study was carried out to investigate the optimal application rate and time of mixed expeller cake (MEC) for the replacement of chemical fertilizer. Dongjin-1, as cultivated rice was used at Fluvio-marine deposit in Honam plain paddy field. Soil chemical properties were improved by the application of MEC. Contents of total nitrogen and organic matter were higher in 70%, 100% plots of basal dressing than standard fertilizer application (SFA) plot. Cation exchangeable capacity was highly increased in 70% plot of basal dressing. Also, the content of organic matter in soil was increased with MEC application. Cation exchangeable capacity, total nitrogen and available phosphate were decreased according to late application time. The content of inorganic nitrogen in soil showed high tendency at more application rate of MEC, and nitrogen mineralization at harvest season have finished in 50%, 70% plots of basal dressing. The content of inorganic nitrogen in soil was increased according to late application time, however it was decreased in the late period of growth. Leaf color value became darker with increased application rate of MEC. Leaf color was dark green in MEC application plots at panicle formation stage, on the other hand, it was light green in 50%, 70% plots of basal dressing at heading stage. SPAD reading value of leaf-color was high during the whole growth stage in MEC application plots. More application rate of MEC showed higher tendency of fertilizer nitrogen absorption. Nitrogen use efficiency was the highest in 70% plot of basal dressing. Absorbed amount of fertilized nitrogen was increased in 10~15days before transplanting and nitrogen use efficiency was high according to the late application time. The ratio of perfect kernel and the content of protein on hulled rice showed high tendency at the less application rate of MEC. The ratio of head rice on milled rice showed high tendency at the less application rate of MEC. Rice yield increased 4% in 100% and 70% plots of basal dressing compare with SFA ($5.18Mg\;ha^{-1}$) plot respectively. Ear and culm length of rice were long according to the late application time, while the numbers of spikelet and ear were increased and the percentage of ripened grain was decreased. Rice yield was increased 2~5% in all MEC application plots compared to SFA plot and especially, increased 10~15days before transplanting in application plots. The optimal application rate and time of MEC on normal paddy field in plain were concluded that 70% basal dressing and 10~15days before transplanting