• Journal of Satellite, Information and Communications
• /
• v.3 no.1
• /
• pp.35-40
• /
• 2008

In this paper, a new analytical formulation is presented for calculating shielding effectiveness (SE) of shielding enclosure including satellite electronic components and equipments. The shielding enclosure has a dielectric-backed aperture. The SE may be a function of frequency, dielectric constant, and position within the enclosure. And, the formulation has been extended for calculation of the SE of the structure where the one side of dielectric is partially backed by conductor. Our simulation results give that the dielectric material lowers the Q factor, and the further the observation point is from the aperture, the more SE increases.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.7
• /
• pp.592-602
• /
• 2013

The purpose of this study is to optical cable closure and fiber line monitoring system. The current optical cable closure cases have not had any systems that help the central control station recognize opening as well as closing the cases in real-time when opening B2B and B2C lines. to solve this problem, it is considered to create systems that go off alarms, real-time fault location immediately, set alarms for open and close monitoring optical cable closure, and inspect regularly whether optical cables are deficient when monitoring the optical line in real-time and cutting them, in this paper, the monitoring system whose the central control station finds an optical signal block immediately and goes off the alarms when line workers separate components like a connector or a tray from the optical cable closure through OTDR. this study can contribute to stabilize the network quality through the quick and effective operation of the cables.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.1
• /
• pp.218-226
• /
• 2017

In this paper, optical transport network in real time monitoring system using smart phone. The existing housing using monitoring was a smart phone of optical transport network access switch about an event with new installation of cognitive system in real time. This paper can this problem to be solved of the invention in real time maintenance using smart phone application and optical cable closure switch. If you want to find optical cable closure fault location, this smart phone web is very useful. Cable tie is isolation of fiber spare board from fiber switch tie occur push message. Housing and access, and an external failures otdr the measurement of the global positioning to be able to easily using the This paper can find event of optical cable closure unauthorized work and fault using smart phone OTDR function. the optical cable fault time reduction and network transport quality by managing real time optical cable section by using the smart phone can be maintained efficiently.

• 한국정보통신설비학회:학술대회논문집
• /
• 2005.08a
• /
• pp.210-216
• /
• 2005

BB-Manhole (통신장치 지하 수용구조물)은 초고속 서비스 제공에 필요한 각종 통신장비를 지하에 수용하기 위하여 내부 환경조절 기능을 갖춘 구조물로서 현재 옥외형 함체를 제한하고 있는 수도권 지역에 주로 설치하여 KT의 초고속 서비스 품질 개선 및 신규 가입자 유치에 적극 활용하고 있다. 최근 초고속 인터넷 사업의 경쟁이 심화되면서 가입자들은 보다 빠른 속도의 안정적인 서비스를 요구함에 따라 KT는 BB-x Series 를 이용하여 가입자 최전방에 광전송장비를 설치하고 있으나 집선 용량이 큰 현재의 BB-Manhole로는 경제성 부족으로 인하여 음성 2,400p 이하의 작은 셀 구축에 적용되지 못하는 단점이 있었다. 따라서 지하에 수용되어 있는 통신함체를 작업 시에만 부상시키는 방식을 적용하여 크기를 대폭 축소시킴으로써 회선당 단가를 낮춘 중형 BB-Manhole을 개발하게 되었는데, 본 논문에서는 이러한 중형 BB-Manhole의 특징과 개발과정에 대하여 소개하고자 한다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.4
• /
• pp.433-439
• /
• 2015

Enclosures for CCTV internal short circuit are prevented due to wetting to maintain a constant humidity and temperature, to avoid condensation due to temperature difference, a constant temperature and humidity requirements of the equipment, such as high-temperature resistant and a constant temperature of the structure, degree of energy utilization is optimized for developing this corresponding housing automatic control system and humidity is required. Device being an expensive imaging equipment in side of the enclosure according to the temperature conversion from a hazard protection, there is a need for a constant temperature and humidity control apparatus that can prevent a short-circuit failure. This is a system in which the accessory device is absolutely required for the storage and transmission of an image in recording reliability and field conditions.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.29 no.6
• /
• pp.279-288
• /
• 2017

Heat generation rate in a telecommunication cabinet increases due to the continued usage of mobile devices. Insufficient removal of heat intensifies the cabinet temperature, resulting in the malfunction of electronic devices. In this study, we assessed both aluminum and plastic heat exchangers used for cooling of the telecommunication cabinet, and compared the results against theoretical predictions. The aluminum heat exchanger was composed of counter flow parallel channels of 4.5 mm pitch, and the plastic heat exchangers were composed of cross flow triangular channels of 2.0 mm pitch. Samples were made by installing two plastic heat exchangers in both series and parallel. Results showed that the heat transfer rate was highest for the series cross flow heat exchanger, and was least for the aluminum heat exchanger. The temperature efficiency of the series cross flow heat exchanger was 59% greater than that of the aluminum heat exchanger, and was 4.3% greater than that of the parallel cross flow heat exchanger. In contrast, the pressure drop of the parallel cross flow heat exchanger was significantly lower than other samples. The heat exchange efficiency was also the largest for the parallel cross flow heat exchanger. The theoretical analysis predicted the temperature efficiency to be within 3.3%, and the pressure drop within 6.1%.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.1
• /
• pp.702-708
• /
• 2017

The heat generation rate in a telecommunications cabinet keeps increasing due to the increased usage of mobile devices. Insufficient removal of the heat increases the cabinet temperature, which results in the malfunction of the electronic devices. In this study, tests were conducted on aluminum and plastic heat exchangers for cooling a telecommunications cabinet, and the results were compared with theoretical predictions. The aluminum heat exchanger comprised counter flow parallel channels with 4.5-mm pitch, and the plastic heat exchangers comprised cross or cross-counter flow triangular channels with 2.0-mm pitch. The volume of the cross flow heat exchanger was the same as that of the aluminum heat exchanger, and the volume of the cross-counter heat exchanger was 33% larger than that of the aluminum heat exchanger. The results show that the heat transfer rate is the highest for the cross-counter heat exchanger and lowest for the aluminum one. The temperature efficiency of the cross-counter heat exchanger was 56% higher than that of the aluminum one and 20% higher than that of the cross flow heat exchanger. The pressure drop of the cross-counter heat exchanger was approximately the same as that of the aluminum one. The heat exchange efficiency was the highest for the cross-counter heat exchanger and lowest for the cross flow heat exchanger. The theoretical analysis somewhat overestimated or underestimated the data.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.5 no.2
• /
• pp.29-38
• /
• 1994

The denser and higher speed telecommunication systems get, the more electromagnetic waves and more heat they throw off. With power predictions lastly for the upcoming systems, they need the enforced method to optimize the technologies between shielding effectiveness and cooling characteristics. In the present study, the shielding effectiveness and cooling characteristics for en- closures with multiapertures considered as fundamental solution in telecommunication systems are performed both of experimentally and unmerically. The shielding effectiveness measured from ex- perimental work is compared with both of the analytical data for flat plates with multi-apertures and the cooling characteristics by the numerical solution. As results, the most significant influence on the shielding effectiveness of enclosures is determined by the porosities of apertures, and it is found that shielding effectiveness and cooling capabilities are significant varied, reciprocally,at which porosity is more than 80%.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2016.07a
• /
• pp.9-12
• /
• 2016

본 논문에서는 지진 및 재난상황을 신속하게 대중에게 전파하기 위해 상황실에서의 통제에 따라 정해진 경보방송을 수행하고, 대용량 스피커를 통해 출력할 수 있는 장치를 소개한다. 통신망은 VHF와 위성을 이용하는 이중화로 구성하여 재난발생 시 통신장애에 대한 서비스를 안정화하고, 통신부/제어부/입출력부/앰프부/전원부 등을 유니트로 설계하여 유지보수를 수월하게 할 수 있도록 구성하였다. 야외 환경에서 동작되는 장비는 먼지로부터 보호하고 방수기능이 포함되어 있으므로 밀폐형 함체 내부에 장착된다. 혹한 및 혹서의 날씨에도 장비 운영에 문제가 없도록 장비 내부에 히팅을 하고, 팬을 이용하여 공기 배출을 통해 온도 조절 기능을 수행한다. 배터리를 내장하여 불안정한 상용 전원 공급 조건에서도 안정적으로 운영될 수 있도록 설계하였다.

• Journal of Digital Convergence
• /
• v.10 no.11
• /
• pp.351-358
• /
• 2012

This study is aimed at suggesting optical communication equipment that can deliver high quality video information in high speed, to efficiently handle the flood and water pollution in the river basin. This system is cheaper than existing equipment, and can monitor optical Internet as well as the condition of equipment. Generally, the communication equipment to prevent flood is installed in an unmanned control box and operated by the flood control office situated at the fiver mouth in a long distance section. Therefore, it is hard to promptly cope with communication interruptions, which occur by the cutting or aging of the optical cable. Under the circumstances, this study suggested an efficient system that can deliver high quality video information in high speed (Optical Transmission Convert System) by using optical fiber. The system also solves problems by making use of automatic protection switching (APS) when an accident happens. Its real-time monitoring function gives notice of the problem-occurring points. The system is expected to be widely used in various areas such as intelligent traffic systems.