• Journal of the Korea Convergence Society
• /
• v.2 no.2
• /
• pp.27-34
• /
• 2011

This study is making a product for the development of one process worm wheel of making a shape for gear for worm wheel without hobbing manufacturing process. Because of removing a hobbing process, plastic worm wheel for increased productivity and equivalent quality is produced in the result. As the result, this product is selling to Hyundai Mobis, Mando, TRW, KOYO/NSK/Showa(Japan), Delphai(America). The core technology and different strategy are as follows. The technology protection for molding of worm whee is currently patent process "Molding process of helical gear(No. 10-2008-0105908). Further patent procedure for "molding system for positioning decision of inserting boss is currently prepared. As gear molding procedure in hobbing machine without gear machining procedure, most of all, core development technology which is making a gear tooth is main topic. So that, in case of currently developed worm wheel, because core and mold base are not developed in the first procedure, gear is machining in hobbing M/C as the second procedure. In the later, patent for mold base structure will be prepared in this study results.

• Tunnel and Underground Space
• /
• v.24 no.1
• /
• pp.46-54
• /
• 2014

Direct shear tests have been initiated to understand the characteristics of joints which crucially affect the stability of rock mass. In this research, numerical approach in direct shear tests has been initiated using 3DEC on the basis of 3D distinct element method. Normal loads were altered in four different levels on artificial joint tests depending on the sawtooth angle and strengths on constant normal stress conditions, measuring the peak shear strength according to the direct shear tests under laboratory condition. Also results obtained from mechanical properties through laboratory test were used to perform numerical modeling, and shear strength obtained from the modeling was used to compare with laboratory direct shear test. As a result numerical analysis from distinct element method can simulate well on the shear behavior of rockmass.

• Korean Journal of Materials Research
• /
• v.2 no.2
• /
• pp.119-125
• /
• 1992

Oxygen segregation in horizontal-magnetic-field-applied Czochralski (HMCZ) silicon crystals has been studied as a function of magnetic field strength (B) and crucible rotation rate (C). Along the axis of 57mm din. <100> crystals grown under B=2, 3, 4 kG and C=4-15rpm, the oxygen distribution was usually saw-tooth shaped and fluctuated unevenly. Compared to the conventional CZ method, this result seems to indicate that the horizontal magnetic field, at levels used in the present experiment, had a destabilizing influence on oxygen transport to the growth interface. On the other hand, as C increased, the oxygen fluctuation lessened, and [0] increased overall. At B=2 kG, an oxygen profile in a level of 27-36 ppma was achieved by a programmed ramp of C. Oxygen precipitation behavior of the HMCZ silicon during a simulated device manufacturing process was compared and found to be inferior to that of typical CZ silicon. The uneven oxygen profile in the as-grown state was identified as the major source of poor precipitation uniformity in the HMCZ silicon.

• The Korean Journal of Food And Nutrition
• /
• v.15 no.1
• /
• pp.58-63
• /
• 2002

Lipid contents and fatty acid compositions of 16 kind sea algaes in the southern sea coast of Korea were analyzed to evaluate nutrient significance of total polyene, n-3 polyenes and n-6 polyene fatty acids. Total lipid contents were 0.58 ∼ 3.00% in 9 kinds of brown algaes, 0.47 ∼ 2.16% in 5 kinds of red algaes and 0.55 ∼2..99% in 2 kinds of green algeas. N-3 polyenes and n-6 polyenes of the fatty acid compositions were 1.46∼25.67% and 0∼48.51% in the brown algaes, 1.17∼21.91% and 0.28 ∼29.35% in the red algaes, and 3.67%∼ 10.61% and 4.10 ∼ 8.66% in the green algaes, respectirely. The fatty acid contents and compositions of n-3 polyenes and n-6 polyenes, monoenes and saturates were vary different in the algae groups and sepecies.

• Journal of The Korean Society of Integrative Medicine
• /
• v.4 no.2
• /
• pp.29-36
• /
• 2016

Purpose : The purpose of this study was to find out the effects on muscle activations of serratus anterior and upper trapezius muscles when push-up plus exercise togu applied differently depending on the body part. Method : Thirty six volunteers took part in this study and we divided into three groups(upper arm togu group 12, leg togu group 12, upper arm-leg togu group 12). Each experimental group performed push-up plus exercise. All volunteers received a total of 18 exercise session over a 6 week period (three times per week). Exercise program was composed of serratus anterior and upper trapezius push-up plus exercise. Then we measured muscle activation of scapular stabilizer by electromyography. Repeated ANOVA was used to examine the effects of the intervention on each outcome measure. Result : After the six week intervention, there was a significant difference between the pre and 6 week in serratus anterior and upper trapezius muscle activity(p<0.05). After the six week intervention, there was a significant difference among the three group in serratus anterior muscle activity but no significant difference in upper trapezius muscle activity(p>.05). Conclusion : Serratus anterior and upper trapezius showed high muscle activity during push-up plus exercise. Therefore have a positive impact of scapular stabilizer. The larger the area of the unstable support surface, the larger muscle activity was larger of variation quantity.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.8
• /
• pp.855-862
• /
• 2003

This paper suggests the PIFA structure modified antenna in which short-circuit plate is located between planar element and ground plane, in order to solve the problem of narrow band of existing internal antenna, PIFA. It is also suggested that internal antenna has the perturbation in the patch to broaden the frequency bandwidth. It is possible that the antenna is installed into the mobile telephone with a low profile condition(h=0.015 λ) to use internally, and acquired desired bandwidth(5.2 %) through double resonance structure, remodeling the PIFA that is already well-known as an internal antenna. This paper investigated how characteristic is affected by the feeding point(Yf, Zf), short strip plate(Zs), short strip width(Ws), perturbation width(w), length(d), short plate height(h), dielectric($\varepsilon$$\_$r/) to be slim type antenna. It is compared with existing PIFA bandwidth, and is suggested pattern as the H.E plane. It is simulated using the Microwave Studio of the CST Inc. based on FIM(Finite Integration Method) method and analyzed antenna characteristic following the variation each parameters. The result proved the practical use of PIFA antenna by comparing the measured and simulated data of the antenna.

• Journal of Digital Contents Society
• /
• v.15 no.6
• /
• pp.737-743
• /
• 2014

For single image super resolution (SR), interpolation based and example based algorithms are extensively used. The interpolation algorithms have the strength of theoretical simplicity. However, those algorithms are tending to produce high resolution images with jagged edges, because they are not able to use more priori information. Example based algorithms have been studied in the past few years. For example based SR, the nearest neighbor based algorithms are extensively considered. Among them, neighbor embedding (NE) has been inspired by manifold learning method, particularly locally linear embedding. However, the sizes of local training sets are always too small. So, NE algorithm is weak in the performance of the visuality and quantitative measure by the poor generalization of nearest neighbor estimation. An improved NE algorithm with Support Vector Regression (SVR) was proposed to solve this problem. Given a low resolution image, the pixel values in its high resolution version are estimated by the improved NE. Comparing with bicubic and NE, the improvements of 1.25 dB and 2.33 dB are achieved in PSNR. Experimental results show that proposed method is quantitatively and visually more effective than prior works using bicubic interpolation and NE.

• Korean Journal of Optics and Photonics
• /
• v.17 no.3
• /
• pp.273-277
• /
• 2006

In this paper, we constructed the Littman type and fixed Littrow type tunable external-cavity diode laser systems. The laser output, which is the 0th-order diffracted beam from the diffraction grating in an external cavity, was the single longitudinal mode. Its FWHM was measured as less than 9MHz. With the diode driving current of 140mA and operating temperature of $25^{\circ}C$, the coarse tuning range of 5.375nm was measured for the Littman type, and of 13.65nm was measured for the fixed Littrow type. A fine tuning experiment in which an external mirror was rotated by a PZT driven by a sawtooth wave was performed, and its tuning range of 0.042nm was measured for both types. The fixed Littrow type tunable external-cavity diode laser system was an improvement on the conventional Littrow type tunable laser system in which the output direction varies due to the grating embedded in the mirror plate.

• Applied Biological Chemistry
• /
• v.38 no.5
• /
• pp.398-402
• /
• 1995

Hardness and adhessiveness of cooked rice were measured with rice grain and rice block methods by texturemeter. In grain method 3, 4 and 5 grains were arranged and subjected to the texture test with a plastic plunger at 95% strain and 0.5mm/sec speed. The hardness were 7.4kg, 7.5kg and 10.0kg respectively and the coefficient of variation ranged from 37.0% to 25.9%, which was mainly due to the irregular geometry of the grains in each specimen set Adhesiveness could not be measured with this method. A cylindrical rice block($H/D=20mm{\times}15mm$) was made for the texture analysis. The hardness was 2.1 kg with coefficient of variation ranging from 2.8 to 7.0%, and the block method was s more reproducible compared to the grain method. A grooved plastic plunger and platform were designed for the measurement of adhesiveness of cooked rice block. The adhesiveness was 0.68kg sec and the coefficient of the variation was 4.6%.

• Journal of the Korean Institute of Gas
• /
• v.21 no.6
• /
• pp.8-14
• /
• 2017

One of the main causes of gas pipeline accidents is mechanical impact(third party damage). The majority of high pressure gas pipelines buried in major domestic industrial complexes are old pipes which have being operated over 20 years. Therefore, if an accident occurs, there will be a full scale accident because there is no additional inspection and reinforcement time. In this study, the defects on the piping during the mechanical impact were studied through the third party damage(excavation) experiments. Experiments were carried out using the 21 ton excavator which is operated in the actual excavation work and the type of pipe to be struck are ASTM A106 Grade.B and ASTM A53 Grade.B. As a result, when the bucket used during excavator operation is a sawtooth bucket, the defect is more bigger. And the smaller the diameter of the pipe, the smaller the depth and length of the defect. Also, it was confirmed that the impact height had no effect on the defects on the buried pipe, during the excavation work.