• The Journal of Engineering Geology
• /
• v.23 no.4
• /
• pp.363-373
• /
• 2013

This study investigates the dispersion and behavior of Au and heavy metals in the water system (soil, AMD and stream sediment) at the abandoned Bonjeong gold mine, based on XRD, aqua regia, sequential extraction, and physico-chemical analyses. The XRD analyses targeted quartz and kaolinite in the mine waste soil and quartz and goethite in stream sediment. The physico-chemical analyses of AMD with increasing distance from water system showed that pH increased from 3.00 to 3.19 and Eh decreased from 450 to 396 mV. The Au content in AMD ranged from 0.68 to 0.97 mg/L upstream, but was not detected downstream. The Au content of stream sediment was 13.76 to 22.85 mg/kg. Sequential extraction from stream sediment revealed 10.84% exchangeable (STEP I), 11.09% carbonates (STEP II), 25.53% Fe-Mn oxides (STEP III), 26.62% organic matter (STEP IV), and 24.61% residual (STEP V).

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.39 no.3
• /
• pp.96-107
• /
• 1997

This study was carried out to examine the physicochemical characteristics of dredged soils in reservoirs. Surveys and analyses of basic materials were made on 241 of 2,328 reservoirs in Chonbuk province through 2 years from December 1994 to November 1996. The results of this study are summarized as follows : 1. Soils were classified as 15 types according to physical properties, and some soils contain comparatively high percentage of sand and gravel. Considering only soil textures, useful and economical soils as aggregate are approximately 25% in all, and the other soils are arable for farm planting. 2. The results of chemical analyses of soils showed on the average 5.9 in pH, 1.lmmhos/cm in ECe, 14.6me/l00g in CEC, 460.0ppm in T-N, 119.0ppm in T-P, 264.9ppm in K, 134.2ppm in Na, l,335.0ppm in Ca, 575.9ppm in Mg, 486.Sppm in Fe, 57.7ppm in Mn, 3.3ppm in Cu, 21.9ppm in Zn, 0.49ppm in As, 0.34ppm in Cd, 0.O3ppm in Hg, 1.7% in OM, respectively. 3. General chemical components, heavy metals, organic matter contents were analyzed as similar to tlie mean values of common soils, therefore it was considered to be no significant effects on crop growth in the chemical properties. 4. Accodingly, the physicochemical characteristics of soils ought to be analyzed accurately before dredging for effective using of dredged soils. And it will be more effective, if the dredged soils are used with proper balance among each content of components with considering to the physicochemical properties of common soils.

• Journal of Korean Society of Forest Science
• /
• v.88 no.2
• /
• pp.255-265
• /
• 1999

This study deals with forest soil characteristics and their effects on the trafficability of logging vehicles. The study area is the national experimental forest located in Kwangnung. This site has 20m length and is equally divided by 5 surveying ranges with 4m width, on which a tractor(FIATAGRI) attached with logging boogie can drive in 4 driving types, namely 1time-return unload, 1time-return with load of 780-790kg weight of 3 logs, 5 and 10times-return with same load. After one driving type on all surveying ranges, the soil hardness is surveyed 5 times with 3 several type tools, SHM-1 type, lang penetrometer(L-PNTM), and clegg impact soil tester(CIST). A disturbed degree of cover vegetation and sliding conditions of vehicle are also observed. As results, the soil type of the test site was SC by USCS and dry brown forest soil. The cover vegetation is gotten trambled under driving after 3-5 times-return, shrubs leaves are fully fallen and their bark are peeled, and after 10 times-return the cover vegetations were nearly disappeared. The test vehicle has neither slided nor was overthrown. The wheel tracks in the 1-3 ranges, of which unit weight(gd, gt) is high and soil moisture content(MC) is low, were only 1-2cm deep, but those in the 4-5 ranges, of which the gd, gt is low and the MC is high, were 5-7cm deep. In the soil hardness test, which was established in 5 test ranges by types of driving, the more driving times, the higher the hardness. The soil hardness surveyed by L-PNTM has changed slowly and that surveyed by SHM-1 type has risen sharply. In the ranges with higher specific gravity(Gs), higher unit weight, lower MC and higher liquid limit(LL) and plasticity index(PI) was the soil hardness high and the trafficability was good. In the ranges with opposite conditions, also in the ranges of the lower soil hardness, the trafficability must be not good, because the wheel track may be deep. The results from CIST attached with 4kg hammer was not better than expected. So it is recommended to use CIST with 2.5kg or 0.5kg hammer.

• Korean Journal of Soil Science and Fertilizer
• /
• v.29 no.2
• /
• pp.113-123
• /
• 1996

This experiment was carried out to compare with the physico-chemical properties of granular fused magnesium phosphates which were two domestic products(Pungnong Biryo Industrial Co., LTD and Kyunggi Chemical Industrial Co., LTD) and a imported Chinese product. The changes of pH, distribution of particle size, disintegration in water and in soil, hardness in soil, chemical composition, and dissolution rates in water, in soil and in 2% citric acid solution were investigated. The changes in pH were bigger in Jungmun series(black volcanic soil), in the imported chinese product, and in Jungmun series with the larger quantities applied. The domestic products were lower in pH, calcium, alkalinity and 1/2N-HCl soluble silicate than the Chinese product but total(Aqua regia) soluble phosphate, 2% citric acid soluble phosphate, 1/2N-HCl soluble and 2% citric acid soluble magnesium, and 2% citric acid soluble manganese concentration were similar among the domestic products and the imported product. In particle sizes, Chinese product was the biggest, Kyunggi product was the next, and Pungnong product was the smallest. The changes of disintegration rate in water and in soil were smaller in Pungnong and Kyunggi products at the early days of dissolution, and there were decreased with the order of Kyunggi product> Chinese product> Pungnong product at the latter days. The hardness of the products in soil was the strongest in Kyunggi product, the next was Pungnong product and Chinese product was the weakest so as to hardly measurable. The changing dissolution rates of 2% citric acid soluble phosphate concentration of granular fused magnesium phosphate products were the highest in Kyunggi product and the lowest in Pungnong product at the early days, the three products were dissolved over 90% within 50 days, and there were no clear difference among the products after 70 days of dissolution. The dissolution rates of 2% citric acid soluble phosphate concentration of granular fused magnesium phosphate products in soil were the highest in Pungnong product and Chinese product was the lowest, but they were less than 60% in 100 days of dissolution.

• Journal of Conservation Science
• /
• v.30 no.4
• /
• pp.395-407
• /
• 2014

In this study, firing temperature of bricks from the Songsanri tomb complex is interpreted based on the mineralogical and physical changes of soil samples fired at different temperature. When soil samples were burned at 500 to $1,200^{\circ}C$, phase transition of clay minerals affected the mineralogical composition and microstructure, which leaded to alteration of physical features as color, water absorption and porosity. Mineralogical composition can be assumed to vary with the temperature by mineral phase stability, however, color, water absorption, porosity and microstructure had slow change under $1,000^{\circ}C$, and had rapid change from 1,000 to $1,200^{\circ}C$. Upon the mineral and physical alteration of soil, firing temperature of bricks from the Songsanri tomb complex were estimated. Some bricks were over fired at temperature more than $1,200^{\circ}C$, some high-burned bricks were fired from 1,100 to $1,200^{\circ}C$, some bricks were fired by 900 to $1,000^{\circ}C$ and some bricks ere assumed not to be fired. Henceforward mineralogical and physical study can be applied to interpretate more precise firing temperature.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.6
• /
• pp.721-729
• /
• 2015

Wood properties depend on not only environmental factors such as soil, climate change, or forest stand characteristics, but also silviculture practices such as thinning, regeneration, or selection. This study report influences of the extent of thinning intensity from no thinning, moderate and heavy thinning to the wood property of Quercus acuta forest stands in Wan-do arboretum, Jeollanam-do Province. The results showed that there were close relationships between thinning intensity and anatomical, physical or mechanical properties of Quercus acuta wood. Especially, there are close relationships between thinning intensity and ring width or mechanical properties of wood. As a result, this study showed high correlations between Quercus acuta wood properties and thinning intensity of Quercus acuta forest stand. These findings are expected to be very useful as fundamental data for the implementation of silviculture practices of this specie to produce timber.

• The Korean Journal of Ecology
• /
• v.17 no.2
• /
• pp.143-148
• /
• 1994

The relationships between microbial activity and physico-KDICical characteristics of soils were investigated in three golf courses of Kwanak, Gold and Korea Country Clubs, with different open years. The soil samples were collected in tee, fairway and rough. There were ranges of 4.80-5.55 in pH, $25.55-98.50{\mu}S$ / cm in conductivity, 10.96-16.73% in moisture content, 0.18-0.36g / g in water holding capacity, 3.68-5.39% in organic matter, and 0.10-0.25% in total nitrogen. Dehydrogenase activity(DHA) as an index of soil microbial activity was determined. DHA values of soil were $69.83-314.43{\mu}$g / g in three courses and showed the order of Kwanak>Gold>Korea Country Club with open year. This indicates that DHA was affected by several fertilizer treatments rather than herbicide and pesticide treatments. DHA was significantly different with golf clubs as well as golf courses and positively correlated with water holding capacity and total nitrogen.

• The Korean Journal of Ecology
• /
• v.16 no.2
• /
• pp.191-198
• /
• 1993

The relationships between microbial activity and disturbance level of soil were investigated from 15 parks in Seoul and undisturbed area. The physico-chemical characteristics of soil and dehydrogenase activity(DHA) as an index of soil microbial activity were analysed. There were ranges of 3.84~7.37 in pH, 9.63~40.33% in moisture content, 3.41~21.49% in organic matter, 0.36~0.79g/g in water holding capacity and 0.03~0.53% in total nitrogen investigated sites. DHA values of soil were 8.64~$146.76{\mu}g/g$ in park soil and 545.14~$1, 198.80{\mu}g/g$ in undisurbed area. DHA of park soil with high traffic density and contamination source from human activities was much lower than that of undisturbed area. DHA was positively correlated with moisture content, organic matter, water holding capacity and total nitrogen.

• Economic and Environmental Geology
• /
• v.38 no.5 s.174
• /
• pp.587-597
• /
• 2005

This review deals with arsenic chemistry and its occurrence in groundwater. Specifically, the paper gives an overview regarding chemical and physical properties of arsenic species, oxidation of As(III), geochemical processes related to the fate and transport of arsenic, arsenic leaching from soil, and mechanism of arsenic leaching from arsenic-containing minerals.

• Journal of Biosystems Engineering
• /
• v.32 no.4
• /
• pp.207-214
• /
• 2007

Based on the profiles of cone index with depth, physical properties of hardpan in selected rice fields were measured and analyzed in the study. An error correction algorithm removing a random measurement error from raw CI profile data was introduced in the study. The properties of hardpan included the shape, the thickness and the rice root growing layer. The analysis of physical properties of hardpan in the rice fields showed that the type of hardpan could be classified into 6 categories. The thickness of hardpan ranged from 6 cm up to 41 cm and the average hardness of hardpan was analyzed to be from 1.1 MPa through 3.2 MPa in Cone index.