• Journal of KSNVE
• /
• v.10 no.6
• /
• pp.907-913
• /
• 2000

• Geotechnical Engineering
• /
• v.37 no.1
• /
• pp.45-54
• /
• 2021

• Geotechnical Engineering
• /
• v.36 no.4
• /
• pp.46-51
• /
• 2020

• Computational Structural Engineering
• /
• v.36 no.1
• /
• pp.4-9
• /
• 2023

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.436-436
• /
• 2017

IDF(intensity-duration-frequency) 곡선은 재현기간을 고려하여 수공구조물 설계에 필요한 설계강우량을 산정하는데 사용되고 있다. 국내의 경우 IDF 곡선은 지점빈도해석으로부터 지속기간별로 산정되고 있으며 지속기간별 분포형 선택과 같은 많은 가정으로 인해 불확실성을 내포하고 있다. 본 연구에서는 이러한 극한 강우량의 스케일 특성을 통해 서로 다른 기간에 걸쳐 통계적으로 접근하고자 하였다. 이를 위해 지속기간 24시간의 강우자료로부터 연최대강우량을 추출하여 스케일 특성을 통해 지속기간 24시간 이하 또는 이상의 스케일링(scaling) IDF 곡선을 유도하였다. 본 연구를 위해 k-means 방법으로부터 지역을 구분하여 지역빈도해석을 실시하였고, 기상청 산하의 강우 지점을 미계측 지점으로 가정한 후 하향스케일링(down-scaling)과 상향스케일링(up-scaling)을 적용한 후 지속기간 24시간 이외의 확률강우량을 추정하였으며, 빈도해석 결과와의 비교를 통해 스케일링 IDF 곡선의 적용성을 판단하였다.

• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 2000.09a
• /
• pp.84-87
• /
• 2000

최근 들어 구조물이 대형화되고 급속히 시공되는 경향이 증가함에 따라 구조물에 대한 변위측정은 시공중인 구조물뿐만 아니라, 그 사후관리 및 안전성 여부를 파악하는데 중요한 기초자료로 활용되고 있다. 특히, 해상에서 실시되는 방조제나 안벽 공사 등에서는 육상구조물에 비해 변위측정에 여러 가지 제약이 따른다. 이와 같은 해상 토목구조물의 거동을 다각적으로 파악하기 위한 연직 방향 및 평면 변위 측정에 GPS를 적용하면 신속하고 정확한 변위측정 자료를 획득할수 있다. (중략)

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.5B
• /
• pp.563-572
• /
• 2006

In designing the coastal structures, the accurate estimation of wave forces on them is very important. Recently, the empirical formulae such as Goda formula are widely used to estimate wave forces, as well as 2-D hydraulic and numerical model tests. But, sometimes, these estimation methods mentioned above seem to be unreasonable to predict 3-D structure of wave pressure on the coastal structures with 3-D plane arrangement in the real coastal area. Especially, in case of consideration of phase difference at harbor and seaward sides of the large-sized coastal structures like a composite breakwater, it is easily expected that the real wave pressures on each section of coastal structure have 3-D distribution. A new numerical model of 3-D Large Eddy Simulation, which is applicable to permeable structure, is developed to clarify the 3-D structure of wave pressures acting on coastal structure. The calculated wave forces on 3-D structure installed on the submerged breakwater show in good agreement with the measured values. In this study, the composite breakwater is adopted as a representative structure among the large-sized coastal structures and the 3-D structure of wave pressures on it is discussed in relation to the phase difference at harbor and seaward sides of it due to wave diffraction and transmitted wave through rubble mound.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.1
• /
• pp.59-66
• /
• 2021

The earthquakes are the natural disasters that can cause the most serious damage to civil structures. Therefore, various studies are being conducted to secure the safety of structures against earthquakes. Most studies on the safety or mechanism of civil structures during earthquakes are being conducted based on lab scale test, because real structure tests are impossible when considering the scale of civil structures. The scaling factor proposed by Iai is mainly cited, but when applying the scaling factor proposed by Iai, there are many difficulties in selecting the structural members necessary for the production of the lab scale model. This is because when applying the scaling factor proposed by Iai, the scaling factor must be applied to the elastic modulus, which is the material property of the structure. Therefore, a new method based on Iai's 's similarity law for determining scale factor is applied in this study where the material property of real structure is same as that of lab-scale model. Through the results of this study, it is considered that the characteristics of the structure calculated through the lab scale model test can more accurately reflect the characteristics of the real structure.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2003.09a
• /
• pp.435-441
• /
• 2003

본 논문에서는 Maximum Energy Dissipation Algorithm(MEDA) 사장교의 MR댐퍼제어에 적용하고자 한다 MR댐퍼의 제어를 위해서 여러 제어 이론들이 제안되었으나, 각각의 특성에도 불구하고 성능면에서는 큰 차이가 없다 MEDA는 Lyapunove 직접법을 바탕으로 군성되는 제어이론으로써, 15년전에 제안되었음에도 실제 토목구조물에는 적용된 바 없어 그 성능 및 장점이 제대로 검증되지 않았다. 따라서 본 논문에서는 벤치마크 사장교 수치예제를 통해서, MEDA의 토목구조물에의 적용성을 성능(performance)과 강인성(robustness) 측면에서 분석하려한다. 수치예제에서 다양한 지진에 대한 층간변위, 가속도, 그리고 상대변위의 각 제어기법에 의한 감소량은 벤치마크문제에 정의된 평가지수(evaluation criteria)를 사용하였다.

• Explosives and Blasting
• /
• v.39 no.1
• /
• pp.1-9
• /
• 2021

As the national economic growth and the rapid increase in industrial structures are aging, the demand for removing steel structures is increasing, and research on improving the penetration performance of the linear shape charge explosives. In the study, numerical analyses were performed on the effect of the type of explosive used in the self-made shape charging container and the initiation method on the cutting performance of the steel plate and the effect on the shaped explosive installed close to it. ANSYS LS-DYNA, which can analyze the large deformation problem of materials due to explosion, was used, and an ALE(Arbitrary-Lagrange-Eulerian) model was applied that enables interlocking analysis of gases, liquids, and solid.