• 패션비즈니스
• /
• 제25권5호
• /
• pp.99-113
• /
• 2021

This study aimed to produce sensors for measuring thigh motor skills. A textile stretch sensor was manufactured using a CNT(Carbon Nano Tube) 0.1 wt% water SWCNT(Single-Walled Carbon Nano Tube) solution, and different designs were applied to increase the sensitivity of the sensor, and different GF(Gauge Factor) values were compared using UTM devices. The same design was applied to fabrics and weaves to observe changes in performance according to fibrous tissue, and the suitability of sensors was determined based on tensile strength, elongation, and the elongation recovery rate. Sensitivity was found to vary depending upon the design. Thus the manufactured sensor was attached to a pair of fitness pants as a prototype, divided into lunge position and squat position testing, and the stretch sensor was used to measure thigh movements. It was shown that stretch sensors used to measure thigh motor skills should have light and flexible features and that elongation recovery rates and tensile strength should be considered together. The manufactured stretch sensor may be applicable to various sports fields that use lower limb muscles, wearable healthcare products, and medical products for measuring athletic ability.

• 패션비즈니스
• /
• 제24권3호
• /
• pp.17-29
• /
• 2020

This study aimed to produce fiber stretch sensors for smart soccer socks to prevent injuries during training. A sensor was manufactured with stretchable fabric and tested to ensure convenience during training. In order to manufacture the fiber stretch sensor, a CNT dispersion solution was applied to an e-band and elastic polyester fabric, and the performance of the sensors was evaluated by a tensile test. Performance evaluation showed that both of the tested fabrics are excellent for this purpose. Both sensors were attached to socks to create prototype wearable devices, and an experiment was conducted to determine whether a resistance change accompanying relaxation and contraction of the gastrocnemius muscle could be detected. In order to accurately evaluate performance as a sensor, the fabric was stretched 20 times at low speeds of 1 Hz and 0.5 Hz. A change in resistance due to tension was observed, with both the E-band and the stretchable poly fabric showing high sensitivity and high reproducibility. Both can be used as relaxation/contraction sensors. Smart soccer socks were made using the two materials, and an evaluation was conducted. Tensile tests were done on the smart soccer socks; the tests were done 20 times per sock, and the sensor showed a stable resistance change between 30 and 40 ohms depending on the tension of the sensor. As a result, we confirmed that smart soccer socks with stretch sensors made of E-bands can measure changes in the gastrocnemius muscle.

• 감성과학
• /
• 제25권3호
• /
• pp.77-90
• /
• 2022

본 연구의 목적은 루어낚시 참여자의 손목 움직임 측정을 위한 스트레치 센서를 개발하는 것이다. 손목움직임 측정을 위해 스트레치 센서를 손목에 부착하여 배굴, 저굴 그리고 랜딩동작을 게이지율, 인장강도 그리고 신장회복률을 척도로 실험을 진행하였다. CNT 분산액을 이용한 전도성 센서를 개발하고 E-band에 동일한 조건으로 적용하였다. 함침을 각각 한 번, 두 번, 그리고 세 번한 같은 크기의 5종, 15가지 센서를 만능재료시험기(Dacell dn-fga Universal testing machine, UTM)를 활용해 게이지율(Gauge Factor)을 측정하였다. 두 번 함침한 센서가 게이지율이 가장 우수했으며, 게이지율과 인장강도가 높은 세 가지 센서로 프로토 타입을 제작하였다. 아두이노에 연결하여 동작테스트를 한 결과, 인장강도와 게이지율이 가장 높은 시료 1이 세 가지 동작에서 일정한 파장이 유지되었다. 시료 2,3은 배굴과 저굴에서는 일정한 파장을 나타내었지만, 랜딩동작에서는 신호 노이즈가 나타났다. 이는, 랜딩동작에서는 인장강도와, 게이지율에 따라 파장의 패턴이 다르게 나타나는 것을 알 수 있었다. 이와 같은 결과로 손목의 움직임 측정을 위한 스트레치 센서 제작시에 필요한 조건들을 유추할 수 있었다. 본 연구의 결과를 활용하여 루어낚시용 스마트 웨어러블 제품 개발에 응용이 가능할 것으로 사료된다.