• Applied Chemistry for Engineering
• /
• v.34 no.1
• /
• pp.30-35
• /
• 2023

The glass bead surface was coated using a TiO₂ sol, after which dry-treated (TB) and calcined (TBc) samples were prepared. Photocatalytic degradation of methylene blue and toluene, as well as characterization of the TiO₂ thin films, were carried out. The TiO₂ thin film of the TB sample had the same shape as the sponge foam, according to FE-SEM, XPS, and FTIR analyses, and contained both amorphous and crystalline TiO₂. On the other hand, crystalline TiO₂ was mainly present in the TiO₂ thin film of the TBc sample, and needle-shaped particles and tiny ones were mixed. The adsorption capacity for methylene blue and the degradation rate of the TBc sample were less than 10 % compared with those of the TB sample, and the adsorption capacity and degradation rate of the TBc sample decreased similarly as the amount of TiO₂ coating increased. The amount of toluene adsorption for the TBc sample (46 mg/g) was smaller than that of the TB sample with the same coating amount, but the degradation rate was similar. In the case of the TB sample, the degradation rate for toluene decreased less than the adsorption capacity as the amount of TiO₂ coating increased. This result is considered to be because, in the non-calcined TB sample, the active site reduction of the crystalline particles occurred less and the specific surface area of the amorphous texture decreased as the amount of TiO₂ coating increased.

• Korean journal of food and cookery science
• /
• v.11 no.5
• /
• pp.446-455
• /
• 1995

The nutritional properties of the Chol-Pyon were investigated with changing the materials (mugwort and pine leaves). In proximate composition, rice powder added mugwort and pine leaves showed the lligher con-tents of crude protein, crude lipid and crude ash than in rice powder. Ihe pH of rice powder, mugwort and pine leaves was 6.4, 6.8 and 3.5, respectively. The rice powder added pine leaves showed the lowest pH value. The content of the free sugar in raw materials for ChOl-PyOn preparation was 0.9% in rice powder, 0.3% in mugwort and 2.7％ in pine leaves. Eighteen kinds of amino acids were determined in raw materials for ChOl-fyOn preparation and their contents were 4.8% in mugwort, 4.2% in rice powder and 2.8% in pine leaves. The major minerals of raw materials for ChOl-PyOn preparation was 0.9％ increased in the order of K> Na > Mg > Ca in rice powder, Mg > K > Ca > Na in mugwort, and K > Ca > Mg > Na in pine leaves. Both of mugwort and pine leaves additives showed the higher contents of 8 kinds of minerals (Ca, Mg, K, Na, Mn, Fe, Cu, Zn) than in rice powder. In relation to changes in the texture of ChOl-PyOn, hardness, fracturability and adhesiveness at 25${\pm}$1$^{\circ}C$ were measured to be highest in white ChOl-PyOn. Cohesiveness was shown to be highest at 15％ in case of mugwort and 2.5％ in case of pine leaves. Elasticity was measured to be highest at 0.99 in case that 7.5% mugwort was added to raw materials for ChOl-PyOn. As a result of estimating the sensory qualities of the ChOl-PyOn prepared to which the additives were added in differing amounts, immediately after its preparation the mugwort additive of 7.5％ showed the superior sensory qualities Chol-PyOn (p < 0,01).

• Journal of Food Hygiene and Safety
• /
• v.33 no.4
• /
• pp.272-279
• /
• 2018

The high pressure processing (HPP) is a technology which can preserve the quality of foods, such as the fresh taste, incense, texture, vitamin content, and so on, by minimizing the heating process. It does so by applying an instantaneous and uniform pressure that is the same as the water pressure that is 60 km deep in the sea. HPP is a technology that can inhibit food poisoning and spoilage caused by microorganisms and is currently an actively studied area. In this study, we investigated the effects of a high pressure treatment (0, 4, 6 min) on sliced ham, which is a typical meat product, at 600 MP a were tested for their effect on freshness. Moisture contents varied from 48 to 69%, salinity varied from 1.07 to 1.11%, and the pH decreased from 6.4~6.5 to 6.1~5.15. However, there was no difference between the control and treatment groups. General bacteria stored at $20^{\circ}C$ after hyper-pressure treatment were found to have no significant microorganisms in all groups until 4 weeks. but exceeded $10^5$ in control group and HPP 6 min treatment group from 5 weeks, At week 7, it was found to exceed $10^6$. The results indicate it was not possible to ingest food in the 4-and 6 minute treatment groups. Coliform was not observed in all groups despite observing for a total of 7 weeks at $20^{\circ}C$ weight test. VBN, a method used to determine the protein freshness of meat, showed a VBN value of less than 1 mg% until the fourth week and a value of 1 to 2 mg% after 5 weeks. The TBA was used as an index of the degree of fat acidosis in the meat tissues. The results showed it was below 0.18 mgMA / kg until the end of 7 weeks; this value was within the range for fresh meat, and there was no difference in treatment group. In this experiment, deformation of the packaging material did not occur and no swelling occurred due to the generation of gas. It is believed that the basic preservation effect was achieved only by blocking with the air due to the close contact of the packaging material.

• Culinary science and hospitality research
• /
• v.21 no.1
• /
• pp.30-41
• /
• 2015

This study was prepared by varying the type of barley sikhye to promote the use of barley. to learn the quality characteristics of traditional beverage sikhye, sikhyes were made out of different kinds of barley such as amethyst barley, black naked barley, tetrastichum barley, tetrastichum waxy barley, naked barley and naked waxy barley. The result of the study is as following. Regarding the length/width ratio of barley grain, black naked barley was the biggest; while amethyst barley was the smallest. Moisture content of barley grain was in the range of 54.96~71.74%. The saccharification liquid pH was in the range of 5.40~5.63 and the soluble solid content was in the range of 15.37~18.73 brix %. The saccharification liquid of sikhye made of tetrastichum waxy barley had the highest soluble solid content; while the saccharification liquid of sikhye made of black naked barley had the lowest soluble solid content. Reducing sugar was in the range of 4.35~7.42 mg/ 100 g; at which tetrastichum waxy barley sikhye had the highest reducing sugar while black naked barley sikhye had the lowest reducing sugar. The result of reducing sugar was similar to the result of soluble solid content. Black naked barley had low Lightness, redness and yellowness in its cooked rice grain and saccharification liquid. The result of barley sikhye characteristics was as following. Black naked barley had the strongest fullness while tetrastichum waxy barley had the weakest fullness. Black naked barley had strong feeling after swallowing the barley rice grain; while tetrastichum waxy barley had weak feeling after swallowing the barley rice grain. The result of feeling after swallowing the barley rice grain had correlation with fullness. The result of preference test was as following. naked waxy barley sikhye and naked barley sikhye had best outlook. In the smell, amethyst barley sikhye was the best. regarding texture, naked barley sikhye and naked waxy barley sikhye had high preference. In overall preference, naked barley sikhye was the best. Like above, there were differences in quality in sikhyes dependent on the variety of barley. In particular, tetrastichum waxy barley and naked barley will be able to increase the amount of sweetness without malt production during sikhye.

• Korean Journal of Food Science and Technology
• /
• v.50 no.1
• /
• pp.117-121
• /
• 2018

Puffing process modifies the chemical and physical properties of the grains. In this study, oats were puffed by subjecting them to pressure of 1.0 and 1.2 MPa, following which the bioactive constituents and antioxidant activities in the oat extracts were investigated. The polyphenol content in puffed oat extracts increased in a pressure-dependent manner (109 and 157 mg gallic acid equivalent/100 g at 1.0 and 1.2 MPa, respectively). In addition, gallic acid was synthesized after puffing ($518{\mu}g/g$ of extract at 1.0 MPa) and was the most abundant phenolic acid in puffed oats. The antioxidant activities, which were determined by 1, 1-diphenyl-2-picrylhydrazyl (DPPH) and 2, 2-azino-bis-3-ethylbenzothiazoline-6-sulphonic acid (ABTS) radical scavenging activities, were improved in oat extracts after puffing (+245 and +184% at 1.2 MPa, respectively). In conclusion, puffing process of oats increased the extractability of polyphenols, including gallic acid, which positively affected its antioxidant activities. These results will provide useful information when using puffed oats for food production.

• Korean Journal of Heritage: History & Science
• /
• v.55 no.1
• /
• pp.175-198
• /
• 2022

With the development of technology, the methods of digitally converting various forms of analog information have become common. As a result, the concept of recording, building, and reproducing data in a virtual space, such as digital heritage and digital reconstruction, has been actively used in the preservation and research of various cultural heritages. However, there are few existing research results that suggest optimal scanners for small and medium-sized relics. In addition, scanner prices are not cheap for researchers to use, so there are not many related studies. The 3D scanner specifications have a great influence on the quality of the 3D model. In particular, since the state of light reflected on the surface of the object varies depending on the type of light source used in the scanner, using a scanner suitable for the characteristics of the object is the way to increase the efficiency of the work. Therefore, this paper conducted a study on nine small and medium-sized buried cultural properties of various materials, including earthenware and porcelain, by period, to examine the differences in quality of the four types of 3D scanners. As a result of the study, optical scanners and small and medium-sized object scanners were the most suitable digital records of the small and medium-sized relics. Optical scanners are excellent in both mesh and texture but have the disadvantage of being very expensive and not portable. The handheld method had the advantage of excellent portability and speed. When considering the results compared to the price, the small and medium-sized object scanner was the best. It was the photo room measurement that was able to obtain the 3D model at the lowest cost. 3D scanning technology can be largely used to produce digital drawings of relics, restore and duplicate cultural properties, and build databases. This study is meaningful in that it contributed to the use of scanners most suitable for buried cultural properties by material and period for the active use of 3D scanning technology in cultural heritage.

• Korean Journal of Heritage: History & Science
• /
• v.57 no.1
• /
• pp.82-108
• /
• 2024

With the transition of archaeological recording method's transition from analog to digital, the 3D scanning technology has been actively adopted within the field. Research on the digital archaeological digital data gathered from 3D scanning and photogrammetry is continuously being conducted. However, due to cost and manpower issues, most buried cultural heritage organizations are hesitating to adopt such digital technology. This paper aims to present a digital recording method of relics utilizing open-source software and photogrammetry technology, which is believed to be the most efficient method among 3D scanning methods. The digital recording process of relics consists of three stages: acquiring a 3D model, creating a joining map with the edited 3D model, and creating an digital drawing. In order to enhance the accessibility, this method only utilizes open-source software throughout the entire process. The results of this study confirms that in terms of quantitative evaluation, the deviation of numerical measurement between the actual artifact and the 3D model was minimal. In addition, the results of quantitative quality analysis from the open-source software and the commercial software showed high similarity. However, the data processing time was overwhelmingly fast for commercial software, which is believed to be a result of high computational speed from the improved algorithm. In qualitative evaluation, some differences in mesh and texture quality occurred. In the 3D model generated by opensource software, following problems occurred: noise on the mesh surface, harsh surface of the mesh, and difficulty in confirming the production marks of relics and the expression of patterns. However, some of the open source software did generate the quality comparable to that of commercial software in quantitative and qualitative evaluations. Open-source software for editing 3D models was able to not only post-process, match, and merge the 3D model, but also scale adjustment, join surface production, and render image necessary for the actual measurement of relics. The final completed drawing was tracked by the CAD program, which is also an open-source software. In archaeological research, photogrammetry is very applicable to various processes, including excavation, writing reports, and research on numerical data from 3D models. With the breakthrough development of computer vision, the types of open-source software have been diversified and the performance has significantly improved. With the high accessibility to such digital technology, the acquisition of 3D model data in archaeology will be used as basic data for preservation and active research of cultural heritage.