• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.11a
• /
• pp.371-377
• /
• 2009

The propulsion system of turboprop has been rarely used in the large aircraft due to the limitation of the maximum velocity of the propeller, the power limitation by the reduction gear, etc. Recently, the demand on turboprop aircraft continues to increase because of economical efficiency and environmental factors. In this paper, turboprop propulsion system which is composed of a Pratt & Whitney 127F turboprop engine and a Hamilton Standard 568F propeller was modeled by using the Gasturb11 software. The result of the performance analysis on this propulsion system model showed that the propulsion system model was evaluated to have been successfully builded.

• Journal of Convergence for Information Technology
• /
• v.9 no.9
• /
• pp.141-146
• /
• 2019

The aircraft noise analysis area in this study is a training airfield where various kinds of aircraft are operated. It is difficult to identify the noise analysis as a real measurement in a training airfield. In order to overcome these practical limitations and to establish appropriate noise countermeasures, a noise map is prepared using the Integrated Noise Model Version 7.0 of the aircraft noise prediction program used by the FAA. The noise of C90GT aircraft was measured while flying the takeoff route, landing route, and long route. We want to identify areas where noise damage is more than 70 WECPNL. No area exceeding the legal standard of 70 WECPNL was found in all routes.

• Journal of the KSME
• /
• v.29 no.6
• /
• pp.594-600
• /
• 1989

항공기용 원동기는 항공기를 추진시키기 위한 동력장치이다. 항공기가 추진력을 얻기 위해서는 프로펠러를 회전시켜 대량의 공기를 뒤로 가속시켜 그 반작용을 이용하는 방법과, 단순히 배기 가스를 뒤로 고속분사시켜 그 반작용을 이용하는 방법이 있다. 피스톤 엔진은 전자를, 터보 제트 엔진은 후자를 대표하고 있는데 두 가지 방법을 절충하여 터빈으로 프로펠러를 회전시키는 터보 프롭엔진과, 헬리콥터의 로우터를 회전시키는 터보 샤프트 엔진도 있다. 또 터보 제트 엔진과 터보 프롭 엔진의 증간성능을 꾀한 터보 팬 엔진이 있는데 효율이 아주 좋기 때문에 급속히 발 전되어 항공기용 원동기의 대명사격으로 현재 군용이나 민간기용으로 널리 사용되고 있다. 최 근에는 터보팬 엔진과 터보 프롭 엔진을 절충한 새로운 터보 프롭 APT (advanced turbo prop) 엔진의 실용화가 추진되고 있다. 이상과 같은 종류의 엔진 이외에도 항공기용 원동기에는 극히 제한된 용도에 쓰이는 램 제트와 펄스 제트 엔진 그리고 로켓 엔진 등이 있다. 원동기는 그 용 도에 따라 개발, 활용되는 것이기 때문에 오랜 역사를 지닌 피스톤 엔진은 아직까지도 경항공 기용 원동기의 주류를 이루고 있고, 앞으로도 터보 프롭 엔진과 더불어 나름대로 계속 활용될 것으로 전망된다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.648-651
• /
• 2010

Propeller shall have high efficiency and improved aerodynamic characteristics to get the thrust to fly at high speed for the FAR25 turboprop aircraft. That is way Clark-Y airfoil which is used to conventional turboprop aircraft propeller is selected as a blade airfoil. Javaprop program based on the Adkins method is used for aerodynamic design and analysis of propeller, Adkins method is based on the vortex-blade element theory which design the propeller to satisfy the condition for minimum energy loss. Slipstream displacement don't change and consider a rigid body. High efficiency propeller geometry is generated by varying chord length and pitch angle at design point of FAR25 turboprop aircraft. The propeller design results indicate that could be applied to the FAR25 turboprop aircraft, through analysis of propeller aerodynamic characteristics using the CFD(Computational Fluid Dynamic).

• Aerospace Industry
• /
• s.94
• /
• pp.34-37
• /
• 2007

헬리콥터와 터보프롭기가 만나면 과연 어떤 모습일까? 물론 애써 상상할 필요는 없다. 우리가 상상해야 할 수고를 덜어줄 기종이 이미 나와 있기 때문이다. 바로 V-22 오스프리(Osprey)이다.

• Aerospace Industry
• /
• v.22
• /
• pp.60-62
• /
• 1994

• Aerospace Industry
• /
• v.73
• /
• pp.56-57
• /
• 2000

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1999.10a
• /
• pp.26-26
• /
• 1999

소·중형 산업용 항공기나 초등 훈련기용으로 많이 이용되고 있는 터보프롭 엔진의 성능진단을 위해 선형 GPA 기법을 적용하였다. 대기조건은 지상정지조건으로 하였으며 계측변수의 선정에 따른 오차율을 알아보기 위해 다양한 손상을 가정하였다. 가스터빈 엔진에서 가장 쉽게 발견될 수 있는 성능저하 원인인 압축기 오염과 터빈 부식이 발생하였을 경우를 가정하였다. 다중 손상일 경우 선형 GPA 기법의 신뢰성을 알아보기 위해 압축기에만 오염이 발생하였을 경우, 압축기와 압축기 터빈에 각각 오염과 부식이 발생하였을 경우, 압축기 터빈과 동력터빈에 동시에 부식이 발생하였을 경우, 압축기, 압축기 터빈, 동력터빈이 모두 오염과 부식이 발생하였을 경우를 가정하였다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.05a
• /
• pp.295-299
• /
• 2010

Recently, development and application of the condition monitoring and diagnostic system for improvement of durability and reliability and reduction of operating cost is generalized in the aircraft propulsion system. Especially, for reliable operation of the UAV which is flying in high altitude more than 40,000 ft for a long time an condition monitoring system to identify faults and degradations of its propulsion system should be needed. Therefore, this work proposes an on-line condition monitoring program using MATLAB/SIMULINK. In the development phase of the program, a engine signal generation module is used to simulate real engine measuring parameters instead of the real engine. The proposed on-line condition monitoring program was applied to a real turboprop engine to validate its application capability.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.9
• /
• pp.714-719
• /
• 2013

A turboprop aircraft for this study is required to operate at icing condition in order that it performs its given mission. So an air intake system of the turboprop aircraft should be designed and verified not only to provide the maximum possible total pressure at engine inlet at normal flight condition, but also to include an inertial separator which protects Foreign Object Debris (FOD) like ice or snow at icing condition from entering into the engine inlet screen which can cause or lead an catastrophic engine failure like engine flame-out or severe damage. So an air intake assembly incorporating a variable geometry inertial separator has been designed and then CFD/structural analysis for the assembly was performed to see its design results. Then 35% scaled model of the air intake assembly was manufactured and wind tunnel test was done. This paper describes the detailed design results for the aerodynamic design, analysis and wind tunnel testing during the development process of the air intake assembly.