• Tunnel and Underground Space
• /
• v.23 no.2
• /
• pp.150-159
• /
• 2013

It is generally well known that the stratification of thermal energy in heat stores can be improved by increasing the aspect ratio (the height-to-width ratio) of the stores. Accordingly, it will be desirable to apply a high aspect ratio so as to demonstrate the good thermal performance of heat stores. However, as the aspect ratio of a store increases, the height of the store become larger compared to its width, which may be unfavorable for the structural stability of the store. Therefore, to determine an optimum aspect ratio of heat stores, a quantitative mechanical stability assessment should be performed in addition to thermal performance evaluations. In the present study, we numerically investigated the mechanical stability of silo-shaped rock caverns for underground thermal energy storage at different aspect ratios. The applied aspect ratios ranged from 1 to 6 and the mechanical stability was examined based on factor of safety using a shear strength reduction method. The results from the present study showed that the factor of safety of rock caverns tended to decrease with the increase in aspect ratio and the stress ratio of the surrounding rock mass was influential to the stability of the caverns. In addition, the numerical results demonstrated that under the same conditions of rock mass properties and aspect ratio, mechanical stability could be improved by the reduction in cavern size (storage volume), which indicates that one can design high-aspect-ratio rock caverns by dividing a single large cavern into multiple small caverns.

• Journal of Korean Society of Transportation
• /
• v.21 no.2
• /
• pp.33-43
• /
• 2003

In South Korea, about 74% of total area is mountainous terrain It is therefore inevitable to make tunnel or cutting slope for road construction. According to a related survey, approximately 2,400 sites of cutting slopes were found from 24 different routes of roadway which is overall 900 km long, implying 2.7 slopes per 1km of roadway on average. Even though safety matter such as the slope failure prevention would be the most important consideration for the construction of cutting slopeslandscape of sloped face is nowadays becoming another important factor due to the growing demand for the driver-friendly road environment Various construction methods which attain this goal should therefore be considered in the design stage of the roadway. The objective of this study is to identify important factors in landscape of sloped-cut roadway using factor analysis. For this, 10 main treatment methods of sloped-cut fact were analyzed. This study employed the LISREL(structural analysis of common variance) model in order to capture the qualitative characteristics of the slope-cut road and examine the relationship between the suey error and the variable(s). As a result, more reasonable landscape evaluation model for the road design and construction was proposed.

• Journal of the Korean Vacuum Society
• /
• v.17 no.5
• /
• pp.387-393
• /
• 2008

Using a first-principles total-energy method, we investigate structural and energy changes on Ag/Si(111)$\sqrt{3}{\times}\sqrt{3}$($\sqrt{3}-Ag$ hereafter) as the number of the additional Ag adatoms increases. The Ag coverage varies from 0.02 to 0.14 ML. Most Ag adatoms occupy the ST site, which is the center of small triangles of the substrate Ag layer that is composed of small and large triangles. One of the interesting adsorption features is that the adatoms immerse below the substrate layer. The total energy calculations show that the clusters become the most stable when the number of Ag atoms is three. This three-Ag cluster becomes the building block of the $\sqrt{21}{\times}\sqrt{21}$ phase that shows a large surface conductivity. The simulated STM images show that the adatoms look dark in filled-state images while bright in empty-state images. This suggests that the adatoms donate their charge to the substrate. The simulated STM images agree well with the experimental images.

• Journal of the Korean Geosynthetics Society
• /
• v.12 no.3
• /
• pp.43-53
• /
• 2013

In this study, an analysis about the causes of different types of excavation on accidents is required in order to prevent the frequently occurring accidents related to the earth retaining structure and excavation. Also, analysis of influence was performed by using numerical typical soil conditions and construction trend using numerical analysis method. According to the analysis results of 25 accident cases, the main influence factors were found as following: insufficient of soil survey, instability of temporary facility and lack of groundwater treatment, etc. Furthermore, in the numerical analysis result of 22 cases, drainage method was occurred larger settlement than waterproof method in the Inland. In case of applying the earth anchor method, it needs more detailed in the regions, which are discovered soft ground or rock discontinuities. Also, The consolidated clay absolutely needs further consideration of excess hydrostatic pressure.

• Journal of the Korean Magnetics Society
• /
• v.19 no.6
• /
• pp.197-202
• /
• 2009

The property of soft magnetism for the Corning glass/non-buffer or buffer Ta/Conetic(NiFeCuMo)/Ta prepared by the ion beam deposition sputtering was studied. The effect of crystal property and post annealing treatment depending on the thickness of Conetic thin films was investigated. The coercivities of Conetic thin films with easy and hard direction along to the applying magnetic field during deposition were compared with each other. The coercivity and magnetic susceptibility of Ta(5 nm)/Conetic(50 nm) thin film were 0.12 Oe and 1.2 ${\times}\;10^4$, respectively. From these results, firstly, the Conetic thin film was more soft magnetism thin film than other one such as permalloy NiFe. Secondly, the usage of soft magnetism Conetic thin film for GMR-SV (giant magneoresistance-spin valve) or MTJ (Megnetic Tunnel Junction) structure in a low magnetic field can be possible.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.46 no.2
• /
• pp.119-131
• /
• 2020

If human skin is exposed to high concentrations of particulate matter (PM_2.5 and PM₁₀) for a long time in the outdoor environment such as subway tunnel, it will be adversely affected. In particular, fine particles can damage the skin, causing inflammation and allergic reactions. This study investigated the ability of evening primrose root (EEPR) extract to suppress the skin damages caused by the fine particles. PM was collected from a subway tunnel, where high concentrations have been reported per day over the course of a study. The EEPR had higher antioxidant activity than that of control group (62.6%). The mixture of EEPR and PM inhibited the production of nitric oxide (NO), thereby alleviating skin inflammation caused by fine particle dust. EEPR had weaker cytotoxic activity than the positive control. When cells were exposed to particulate-type dust (PM₁₀), the levels of free radicals were decreased with the increased concentrations of the extract (5, 10, 20 ㎍/mL). While at the same time more effective than positive controls. Therefore, this study proved that the Moonlight flower root extract can be used as a cosmetic material for skin by providing an effect to alleviate skin damage caused by fine particle-type dust.

• Journal of the Korean Magnetics Society
• /
• v.14 no.3
• /
• pp.89-94
• /
• 2004

We have investigated magnetic properties of monolayer (ML)-thickness Co film deposited on InP(2${\times}$4) reconstruction surface using in situ Surface Magneto-Optical Kerr Effects (SMOKE) measurement system. InP(2${\times}$4) reconstruction surface, obtained by repeated sputtering and annealing, was confirmed by reflection hish energy electron diffraction (RHEED) and scanning tunneling microscope (STM) measurements. From both longitudinal and polar SMOKE measurements, we have observed three distinguishable regions showing different magnetic properties depending on the Co thickness. In the Co film thickness smaller than 7 $m\ell$, no SMOKE signal was detected. In the following thickness between 8 $m\ell$ and 15 $m\ell$, both longitudinal and polar Kerr hysteresis loops were observed, which implies a metastable phase coexisted of in-plane and perpendicular anisotropies. In the film thickness larger than 16 $m\ell$, only longitudinal MOKE signal without polar signal was detected, which implies existence of in-plane anisotropy in this thickness region.

• Journal of the Korean Society for Railway
• /
• v.14 no.4
• /
• pp.313-319
• /
• 2011

In a modern society, various type of transportation modes are utilized, among them the subway system is the one of the main transportation mode which more than 7.21 million people ride a day in Seoul. Due to the increased interests on the indoor air quality (IAQ) of underground facilities, public concerns on IAQ of subway system are increasing also. Platform screen door (PSD) recently installed at the whole stations of Seoul subway and tunnel washing-out appeared to be effective in reducing particulate matters in the platform and tunnel. However there has not been any attempt to improve IAQ of subway cabin inside. Most technologies for removing airborne particulate matters are known to be difficult to adopt on the subway cabin due to the problem of maintenance cost. Therefore, the object of this study is a practical development of cabin air cleaning system which can reduce the concentration of airborne particles and harmful gases at the same time. In this paper, we focused on the development of particle removing system utilizing a roll-filter for increasing operating time of air filter. The prototype of system was designed and manufactured based on the numerical prediction results. For rollfilter device, 5 candidate filter materials were tested in point of particle collection efficiency and pressure drop. It was found that the electrically charged filter material showed the highest performance among them.

• Journal of Life Science
• /
• v.27 no.12
• /
• pp.1410-1414
• /
• 2017

Escherichia coli tryptophan synthase (TS) contains ${\alpha}_2{\beta}_2$, which catalyzes the final two steps in Trp biosynthesis. A molecular tunnel exists between the two active sites of ${\alpha}$ and ${\beta}$ subunits in TS. Via intersubunit communication, TS increases catalytic efficiency, including substrate channeling. The ${\beta}$ subunit of TS is composed of two domains, one of which, the COMM (communication) domain, plays an important role in intersubunit communication. The ${\alpha}$ subunit has a TIM barrel structure. This protein has functional regions at the C terminal of ${\beta}$ pleated sheets and in its loop regions. Three regions of the ${\alpha}$ subunit (${\alpha}L6$ [${\alpha}-loop$ L6], ${\alpha}L2$, and ${\alpha}L3$) are implicated in intersubunit communication. In the present study, conformational changes in ${\alpha}L6$ were monitored by measuring the sensitivity of mutant proteins in these regions to trypsin. The addition of a ${\alpha}$ subunit-specific ligand, D,L-${\alpha}$-glycerophosphate (GP), partially restored the sensitivity of mutant proteins to trypsin. In contrast, the addition of the ${\beta}$ subunit-specific ligand L-serine (Ser) resulted in varied sensitivity to trypsin, with an increase in PT53 (substitution of Pro with Thr at residue 53) and DG56, decrease in NS104 and wild type, and no change in GD51 and PH53. This finding may be related to several reaction intermediates formed under this condition. The addition of both GP and Ser led to a highly stable state of the complex. The present results are consistent with the current model. The method used herein may be useful for screening residues involved in intersubunit communication.

• Journal of Bio-Environment Control
• /
• v.10 no.1
• /
• pp.30-35
• /
• 2001

This experiment was undertaken to investigate the effect of root zone temperature during the night on absorption of mineral nutrients, growth, and fruit yield of the truss-limited hydroponic tomatoes in winter. The root zone temperature was either controlled to 10, 15, 20, $25^{\circ}C$, or left uncontrolled at ambient temperatures. Temperature of the covered beds rose as root zone temperature was raised, but it in all treatments was less than 3$^{\circ}C$ higher than that in the control. Raising root zone temperature, except $25^{\circ}C$, showed positive effect on plant height, leaf length, stem diameter, and plant fresh and dry weight, but not on T/R ratio which was the greatest in the control. Root activity in all treatments except $25^{\circ}C$ increased as compared to the control. Mean fruit weight, fruit count per plant, and fruit yield were the greatest in 2$0^{\circ}C$ treatment. Root zone temperature did not significantly affect the contents of total nitrate and magnesium in leaves, stems and roots. Concentrations of phosphate and calcium increased in leaves and stems, but decreased in roots as root zone temperature increased. Overall, 2$0^{\circ}C$ treatment gave the greatest growth and energy efficiency.