• Proceeding of EDISON Challenge
• /
• 2016.03a
• /
• pp.523-529
• /
• 2016

본 연구에서는 전산유체역학을 이용하여 고 레이놀즈수에 유동에서의 탠덤 에어포일에 대한 상대 위치 인자 연구를 진행한다. 탠덤형 날개의 경우 앞뒤 날개의 유동간섭이 날개 성능에 중요한 영향을 미친다. 본 연구에서는 이를 2차원 탠덤 에어포일로 고려하여 유동간섭을 확인한다. 유동간섭에 따른 에어포일 성능을 분석함으로써 뒤 에어포일의 상대 위치를 결정할 수 있으며, 본 연구결과는 실제 탠덤 날개 형태의 항공기 설계에 유용하게 이용될 수 있을 것으로 기대된다.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.6
• /
• pp.531-542
• /
• 2002

Novel tandemless transcoding method for AMR and EVRC speech coders is proposed in this paper. In contrast to conventional tandem method, the parameters which is used commonly in speech coder where CELP algorithm is adapted are directly transcoded. The proposed algorithm is composed of LSP transcoding, pitch delay transcoding, gains transcoding and fixed codebook vector transcoding Evaluation results show that the novel algorithm achieves better speech quality than tandem method and reduce computational complexity and delay.

• Bulletin of the Korea Photovoltaic Society
• /
• v.3 no.2
• /
• pp.6-15
• /
• 2017

실리콘 태양전지는 현재 태양광 시장의 90% 이상을 차지하고 있으며 향후에도 기술 개발을 통해 태양광 시장을 주도하는 기술로 예상되고 있다. 실리콘 태양전지의 가격 경쟁력 확보를 위해 새로운 기술이 개발되고 있는 상황에서 효율 한계를 극복하기 위한 탠덤 태양전지 연구가 주목 받고 있다. 실리콘 기반 탠덤 태양전지의 여러 후보 물질 중 페로브스카이트는 공정의 용이성뿐 아니라 물질의 특성이 탠덤 태양전지 소재로써 적합하여 최근 주요하게 연구되고 있다. 본 논문 에서는 페로브스카이트 실리콘 탠덤 태양전지의 연구 동향에 대해 살펴보고자 한다.

• Journal of Genetic Medicine
• /
• v.5 no.1
• /
• pp.21-25
• /
• 2008

Purpose : In recent years, many countries have adopted newborn screening programs that use tandem mass spectrometry (MS/MS) to screen and the number of diseases screened has also increased. We began screening for inherited metabolic disorders using MS/MS in April, 2001. Our goal was to determine the overall prevalence of metabolic disorders and to assess the effectiveness of newborn screening by MS/MS in Korea. Methods : From April, 2001 to December, 2007, we screened newborns and high risk groups using MS/MS. Acylcarnitines and amino acids were extracted and butylated and were introduced into the inlet of MS/MS. Confirmatory testing including a repeat newborn screening, and urine organic acid and plasma amino acid analysis were performed on a case-by-case basis. Results : The total number of screened subjects 284,933 which comprised 251,799 neonates and 33,134 high risk subjects. The recall rate was 0.4% (1158 tests) and true positive cases were 117 (0.04%). Confirmed metabolic disorders (newborn/high risk group) were as follows; 78 (25/53) amino acid disorders, 27 (16/11) organic acid disorders, and 12 (5/7) fatty acid oxidation disorders. The estimated prevalence of inherited metabolic diseases in newborns was 1:5,000 and that in the total group was 1:2,000. Conclusion : Newborn screening by MS/MS improved the detection of many inherited metabolic disorders. We therefore propose that all newborns be screened by a MS/MS national program and followed-up using a systemic organization strategy.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.3
• /
• pp.230-237
• /
• 2015

To improve productivity and improve the welding process, we have studied the automated system of the weld by applying a tandem welding. Then, the speed of the welding process is improved, production of industries is increasing. Productivity of the industrial sector has increased the application of tandem welding for automated system of welding. But quality assurance for the product take place welding defects in the welding process because the speed of the process is increased. Definitive research solutions an dit's actuality, however, there is insufficient. Accordingly, it is a situation that the performance of the weld to ensure quality of the weld is required urgently after the welding process. Comparing and analyzing the results of passing each experiment of the two-electrode welding and the welding electrode1, a study attempted to quality assurance of the welded joint portion.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.10
• /
• pp.2537-2543
• /
• 2014

Between tandem source-channel coding systems and joint source-channel coding systems, it has been known that there is a complexity threshold in complexity versus performance. In this paper, by expanding the previous analysis for equal error protection systems, we analyze and compare the performance under complexity constrains for tandem source-channel coding systems which employ unequal error protection. Under a given complexity constraint, the optimization is performed to minimize the end-to-end distortion of each representative tandem and joint source-channel coding system. The results show that the complexity threshold for unequal error protection systems becomes smaller and the performance enhancement of unequal error protection systems over equal error protection systems gets smaller as the system complexity gets larger.

• Journal of the Korea Society of Computer and Information
• /
• v.20 no.1
• /
• pp.237-246
• /
• 2015

In this paper, Improved productivity models of container terminal are provided by utilizing a simulation considering Tandem-lift Quay Crane and transport vehicle of container's high productivity 'Alternative ship-to-yard vehicles.' Feature of this method is deriving the data of tandem-lift Quay Crane and Alternative ship-to-yard vehicles, estimating the productivity model of tandem-lift Quay Crane by using regression analysis. Tandem-lift Quay Crane is equipment of loading and unloading to increase productivity approximately by 2 time existing (single, twin) Quay Crane by dealing with four 20ft containers or two 40ft containers at the same. Alternative ship-to-yard vehicles can transfer containers(4TEU) more than existing Yard Tractor. This paper is deriving the optimal combination showing the highest productivity by using simulation considering Tandem-lift Quay Crane and Alternative ship-to-yard vehicles on container terminals and developing estimating model of productivity by using regression analysis using data of simulation.

• Bulletin of the Korea Photovoltaic Society
• /
• v.7 no.1
• /
• pp.17-26
• /
• 2021

Cu(In,Ga)Se₂(CIGS) 태양전지 연구개발은 1970년대부터 지속적으로 발전하여 유리 및 플렉서블 기판에서 모두 20% 이상의 고효율을 달성하였으며, 상용화도 성공적으로 이루었다. 최근 태양전지의 초고효율화를 위한 방안으로 태양전지를 적층하는 다중접합 태양전지 특히 제조원가를 고려한 탠덤 구조에 대한 연구가 상당히 주목을 받고 있다. 이는 페로브스카이트 태양전지를 상부셀로 적용하였을 때, 29.5%의 초고효율이 보고되었기 때문이다. 이런 추세로 보면 태양전지의 탠덤 구조는 초고효율화 달성에 필연적으로 사용될 것으로 생각된다. 하지만 초고효율화와 더불어 BIPV, VIPV, 모바일소자 등 심미성, 경량성, 유연성을 갖춘 다기능성 태양전지에 대한 요구까지 충족시키기 위해서는 궁극적으로 유연한 하부셀이 사용되어야 한다. 이런 점들을 고려하였을 때, 초고효율 유연 탠덤 태양전지의 하부셀로 유연 CIGS 박막 태양전지가 적합한 선택이 될 것으로 판단된다. 따라서 본 글에서는 CIGS 박막 태양전지를 기반으로 하는 탠덤 태양전지의 연구개발 현황에 대해서 살펴보고 향후 유연 탠덤 태양전지의 전망에 대해서도 기술하고자 한다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.6
• /
• pp.483-488
• /
• 2007

The aerodynamic characteristics of FAST(Future Air Speed Transit) combined the body with tandem wing flying over nonplanar ground surface are investigated by using a boundary element method. To validate the present method, results of the present analysis are compared with the experiment and other numerical results. The arrangement of the tandem wing is determined to secure sufficient aero-levitation force and the stability through the analysis of the aerodynamic characteristics of the FAST. The FAST has the maximum lift characteristics when the tandem wing with lower endplate is located at the front side and the rear side of the body. The stability of the FAST can be secured by using the flaperon of the tandem wing.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.7
• /
• pp.615-626
• /
• 2009

The objective of this study is to investigate the interference effects due to tandem rotor's overlap in the forward flight. To resolve the instabilities caused by close proximity of the wake to the blade surface, the field velocity approach is implemented to the existing unsteady panel code coupled with a time-marching free wake model. The modified code is then used to investigate the effects of the selected parameters on the forward flight performance of the tandem rotor. The calculated results for rotor separation effect indicate that stagger(d/D) appears to have little effects on the forward flight performance at high advance ratio and the square of gap(H/D) is inversely proportional to overlap induced power factor. In addition, it is also shown that the overlap induced power factor increases to a certain extent and decrease back as the advance ratio increases.