• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.222-222
• /
• 2010

수평성장 방식을 이용하여 다결정 실리콘 리본을 제조하였으며, 제조된 리본의 미세구조 및 결함을 분석하였다. 기존 잉곳 성장 및 절단 공정을 통해 제조된 실리콘 웨이퍼는 절단 중 실리콘의 손살 때문에 단가를 상승 시킨다. 따라서 실리콘 용탕으로부터 직접 웨이퍼를 제조하는 리본 기술이 활발히 연구되고 있다. 본 연구에서는 수명 성장 법을 이용하여 용융 실리콘으로부터 다결정 실리콘 리본을 제조 하였다. 제조 된 리본의 크기$50{\times}50$ mm였으며 두께는 $375{\pm}50{\mu}m$ 이었다. 또한, 미세구조 분석 결과 결정들의 형상이 불규칙적 이었으며, 바닥에서부터 윗부분까지 한 방향으로 성장되었다. 수직성장된 결정들의 평균 입경은 $50.2{\mu}m$ 이었다. 전위 (dislocations ), 이중(twins), 그리고 기공 (pores) 같은 구조적 결점들과 SiC, 탄소, 그러고 산소와 같은 불순물 결함 등이 관찰 되었다. 본 연구를 통해 제조된 다결정 실리콘 리본은 태양전지용 웨이퍼로 응용 가능 할 것으로 판단된다.

• Electrical & Electronic Materials
• /
• v.24 no.10
• /
• pp.3-9
• /
• 2011

• Journal of Korean Electronics
• /
• v.3 no.9
• /
• pp.84-90
• /
• 1983

• Journal of the Korean Solar Energy Society
• /
• v.35 no.1
• /
• pp.29-34
• /
• 2015

The photovoltaic ribbon attached the flux reduces the solar module manufacturing process and the pollution. This paper presents an analytical method for solving the continuous flux drying system of photovoltaic ribbon. Also, some experiments of the drying of photovoltaic ribbon are carried out in order to design the drying system. Numerical results indicate the air temperature, the air velocity, the air pressure and the timewise temperature variation of ribbon during drying process. In case of the drier process length is short, 400mm, the photovoltaic ribbon is wet. Thus, another study of drying system is necessary to improve the drying ability. As a result, multi-stage drier system is proposed and shown to be good drying ability.

• Resources Recycling
• /
• v.22 no.5
• /
• pp.50-55
• /
• 2013

The recovery of copper from spent photovoltaic ribbon was conducted using thermal treatment method at the range of temperature of $300^{\circ}C$ to $600^{\circ}C$ under inert atmosphere. The coating layer consisted of lead of 68.99 wt.% and tin of 31.21 wt.% was melted down at elevated temperatures and was collected on the bottom of crucible. The chemical composition of copper ribbon after thermal treatment was analyzed by ICP-MS (Inductively coupled plasma mass spectrometry) and the purity of copper was found to be obtained up to about 96 wt.% regardless of temperatures. The cross-sectional area of the specimen was also examined by SEM (scanning electron microscopy) and EDX (energy dispersive X-ray microscopy).