• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.53 no.7
• /
• pp.452-461
• /
• 2004

A novel multilevel PWM inverter is presented for the use of stand-alone photovoltaic power generation system. In appearance, it consists of three full-bridge modules and three cascaded transformers; therefore, the configuration of the proposed multilevel PW inverter is equal to that of a prior 11-level PWM inverter. Only the turn-ratio of a transformer and its corresponding switching function are different from each other. Owing to these differences, the proposed 19-level PWM inverter has two promising advantages. First, output voltage levels increase almost twofold. Consequently, it can generate more sinusoidal output voltage waveform. Second, due to a revised switching pattern, it lightens power imposed on the transformer, which is used for compensating output voltages with chopped pulses between steps. The validity of the proposed inverter system is verified by computer-aided simulations and experimental results based on a 1 ［kW］ prototype. The performance of the proposed 19-level PWM inverter is compared with the Prior 11-level PWM inverter and other counterparts.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.53 no.8
• /
• pp.509-516
• /
• 2004

The concerns of distributed generations including photovoltaic(PV) system have been increased around the world since PV system is becoming widespread as a clean and gentle energy source for earth. In the future high density grid-connected PV systems will be interconnected with distribution network. As a result, the stability and long-term reliability of PV systems have become more important issues in this area. Grid-connected PV systems have been installed and monitored at field demonstration test center(FDTC) and also data acquisition system(DAS) has been constructed for measuring and analyzing performance of PV system to observe the overall effect of environmental conditions on their operation characteristics. The performance of PV system has been evaluated and analyzed for component perspective (PV array and power conditioning system) and global perspective (system efficiency, capacity factor, and electrical power energy) by field test and loss factors of PV system.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.14 no.5
• /
• pp.415-422
• /
• 2009

This paper describes the UIPV(Utility Interactived Photovoltaic) system which can improve the peak-cut effect by adding energy storage device of batteries to the power converter. The proposed system has three possible operation modes depending on relative condition of PV output, which can have the power shaping function covering the peak power for 3 hours. A new power circuit and application algorithm has been applied to UIPV system which is based on working PV system during 3-hour peak time. The energy relationship by the proposed system is analyzed theoretically and experimentally. Also the proposed system is evaluated at the viewpoint of cost and total spacing, which enables the proposed UIPV system to have the reduction of the peak power demand and hence to improve.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.11a
• /
• pp.143-144
• /
• 2019

Recently, environmental pollution related to global warming is on the rise. Meanwhile, renewable energy is a representative example of many efforts to develop eco-friendly energy to solve the depletion of natural resources and the depletion of petroleum resources in conjunction with global warming. Among them, photovoltaic power generation is increasing the subsidies for the government to increase the production of photovoltaic electricity of the general public, showing a high growth rate. However, polysilicon, which is a raw material of the photovoltaic panel, generates waste called polysilicon sludge in the manufacturing process. In order to produce 1 ton of polysilicon, about 2 tons of waste polysilicon sludge is generated. In 2012, polysilicon sludge was generated at 78,000 tons, with an average of about 220 tons per day. The sludge generated due to insufficient treatment of polysilicon sludge is currently solidified and is processed by landfilling. Therefore, in this study, polysilicone sludge is used as the concept of admixture, and the physical properties of the matrix according to the polysilicon sludge replacement ratio based on light burned magnesia is determined.

• Asia-Pacific Journal of Business
• /
• v.13 no.2
• /
• pp.139-154
• /
• 2022

Purpose - This study aims to analyzing of solar power generation cost-benefit. Design/methodology/approach - We analyzed whether there is economic feasibility by selecting parking lots and idle sites located in four areas of Seoul, Gyeonggi, Chungcheong, Jeolla, and Gyeongsang areas nationwide, and analyzing site conditions and installation capacity. Findings - According to the results of the analysis, it was found that there is low profitability in Seoul, Gyeonggi and Chungcheong regions, where the solar radiation was not excellent even if REC is selected through the contract market. However, it is necessary to analyzed the economical validity the profitable validity including environmental benefits (greenhouse gas reduction, NOx, SOx reduction effect) and social benefits (renewable power supply) that is analyzed by income and operating costs which is occurred from electricity sales and REC sales when installing solar power generation facilities. Research implications or Originality - In this study, economic feasibility was evaluated additionally in consideration of environmental and social benefits. In conclusion, it was shown that businesses are not economical when considering only simple financial aspects are also sufficiently economical when it is considering environmental and social benefits.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.60 no.2
• /
• pp.194-206
• /
• 2024

This study focuses on analyzing the energy-saving effects of the recirculation aquaculture system using seawater source heat pumps and solar power generation. Based on the thermal load analysis conducted using the transient system simulation tool, the annual energy consumption of the recirculation aquaculture system was analyzed and the energy-saving effects of utilizing the photovoltaic system was evaluated. When analyzing the heat load, the sea areas where the fish farms are located, the type of breeding tank, and the circulation rate of breeding water were taken into consideration. In addition, a method for determining the appropriate capacity for each operation time was examined when applying the energy storage system instead of the existing diesel generator as an emergency power, which is required to maintain the water temperature of breeding water during power outage. The results suggest that, among the four seas considered, Jeju should be estimated to achieve the highest energy-saving performance using the solar power generation, with approximately 45% energy savings.

• Journal of IKEEE
• /
• v.23 no.1
• /
• pp.289-294
• /
• 2019

At present, domestic small islands mainly supply electric power using diesel generators. However, diesel generators can cause instability of the power system due to slow response on power load fluctuation, and cause environmental problems due to the emission of carbon gas by using fossil fuels. In order to overcome this problem, this paper proposes a method to establish an optimal microgrid by introducing solar power, wind power, and energy storage device to Chujado Island, which is supplied with electric power through a diesel generator. The economical optimum capacity of each distributed power source is calculated by using HOMER (Hybrid Optimization Model for Multiple Energy Resources) program and the proposed microgrid is validated by using PSCAD/EMTDC (Power Systems Computer Aided Design/ Electromagnetic Transients including DC) program which can analyze system stability.

• Journal of Digital Convergence
• /
• v.19 no.11
• /
• pp.365-371
• /
• 2021

In this study, The Virtual Power Plant (VPP) solution platform considered in this study minimizes the cost and investment risk associated with the construction of power generation and transmission facilities. In addition, it includes a Demand Response (DR) program operation function to meet consumers' electricity demand. With the introduction of VPP, it is possible to provide more eco-friendly and efficient power by responding to changes in consumer load in real time through existing generators and DR programs without large-scale facility investment in power generation and transmission/distribution sectors. In order to link the communication device to the solar power and ESS linkage device, it is necessary to transmit data in the control/state between the device device and the edge system and develop an IoT device and interworking platform (OneM2M).

• The Journal of Korean Institute for Practical Engineering Education
• /
• v.3 no.2
• /
• pp.75-82
• /
• 2011

Recently the technology of green growth became more important role among the problems of running out of fossil fuels and global warming. To procure a new growth power combined with energy and green growth, a lot of investment for wind power, photovoltaics system, fuel cell and biofuel expanded day by day. Among these, wing power has a merit of a highly economic and no discharge of toxic substance. These days government and industrial companies actively support the development of wind power technology with lots of investment, but domestic related education and equipment still stay in research level when it is compared with foreign advanced countries which lead the wind power technology. Therefore to expand the base of basic skill required in the related industrials and to advance technology, we are in the situation to be needed a development of a new curriculum and educational equipment which is analogous with the actual industrial system. In this paper a development of a new educational equipment for the learning of turbine control is introduced. This educational equipment has been developed for students to get easy understanding for the theory of wind turbine control. And finally to demonstrate the effect of the use of the developed equipments and curriculum a questionnaire carried out.

• Journal of the Economic Geographical Society of Korea
• /
• v.18 no.1
• /
• pp.60-75
• /
• 2015

The Ruhr area in the Northwestern Germany grew rapidly from the 1850s based on coal mining and iron and steel industries, playing a key role as an engine of industrial growth. Since the 1950s, however, the area has been experiencing a serious economic crisis as the traditional industries declined. The crisis was comprised of increasing unemployment and abandoned industrial lands and facilities. Oberhausen and Gelsenkirhen are typical cities of the Ruhr, characterized by such economic crisis. Oberhausen attempted to solve the problems by developing a large leisure town, composed of a sopping mall, restaurants, and other arts and cultural activities, on a former steel mill site. Gelsenkirhen, on the other hand, went on to promote renewable energy industries, business incubators, and energy-saving housing complexes. This paper analyses the processes and outcomes of urban revitalization policies of the two cities, based on the path dependence theory, and draws theoretical and policy implications.