• Korean Journal of Agricultural and Forest Meteorology
• /
• v.25 no.3
• /
• pp.218-225
• /
• 2023

An agrivoltaic system (AVS) is a combined system that generates power through photovoltaic panels (PVPs) installed above a field where a crop is cultivated. Although soil moisture is an important limiting factor for open-field crop production, particularly during spring season in Korea, it is not well considered in the utilization of AVS. Indeed, the application of water-energy-food nexus on the AVS should be necessary. In this study, the changes of soil moisture and temperature under the AVS was investigated in fallow paddy field during spring season. The AVS that has partial shading condition by PV panels was decreased soil temperature and increased soil moisture compared to open-field. Furthermore, the maximum of the change in soil moisture to the change in soil temperature had a negative correlation both on open-field and AVS under wet condition. It represents that the micro-climate under the AVS is in energy-limited condition. The open-field of relatively high soil temperature was in water-limited condition. The different behavior of soil moisture on the AVS should be considered for the sustainable agricultural system as related to water-energy-food nexus.

• 한국태양에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.273-278
• /
• 2009

The experimental study is performed to investigate the optimum design of the system dissipating properly heat from the in-situ solar panel installed on site. For this purpose, six 12-Watts panels, which are set at the different conditions of the solar panels contained phase change material, changing the array of the aluminum fin and honeycomb at the back of the panel, are tested. PCM, which has $44^{\circ}C$ melting point, is chosen in this study. In order to enhance the thermal heat from the absorbed heat in PCM, finned aluminum plate is placed. Furthermore, Aluminum honeycomb is imbedded in the back container to find if it would improve the thermal conductivity of PCM. As a result, the solar panel, which is combined with honeycomb and outward fins with PCM instead of placing the fine inward, is showing the best performance in terms of controling panel temperature and efficiency.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.1
• /
• pp.74-82
• /
• 2019

The revolution of industry 4.0 is enabling us to build an intelligent connection society called smart cities. The use of renewable energy in particular solar energy is extremely important for modern society due to the growing power demand in smart cities, but its difficult to monitor and manage in each buildings since need to be deploy low energy sensors and information need to be transfer via wireless sensor network (WSN). The Internet of Things (IoT) / low-power wide-area (LPWA) is an emerging WSN technology, to collect and monitor data about environmental and physical electrical / electronics devices conditions in real time. However, providing power to IoT sensor end devices and other public electrical loads such as street lights, etc is an important challenging role because the sensor are usually battery powered and have a limited life time. In this paper, we proposes an efficient solar energy-based power management scheme for smart city based on IoT technology using LoRa wide-area network (LoRaWAN). This approach facilitates to maintain and prevent errors of solar panel based energy systems. The proposed solution maximizing output the power generated from solar panels system to distribute the power to the load and the grid. In this paper, we proved the efficiency of the proposed system with Simulink based system modeling and real-time emulation.

• Journal of IKEEE
• /
• v.22 no.3
• /
• pp.664-671
• /
• 2018

Generally, conventional solar tracking systems employ irradiance sensors to track a sun position, which enables the system to generate maximum solar energy. The usage of irradiance sensors increases system costs and deteriorates the performance of systems from sensor malfunctions. In this paper, a new solar tracking system without irradiance sensors has been proposed in which the controller capable of controlling and monitoring remotely is based on Artik platform. The proposed system tracks the sun position by comparing the amount of currents from several solar panels, resulting in removing irradiance sensors. In order to verify the performance of the proposed solar tracking method, the 12[V]-20[W] prototype system is built and implemented. Since the proposed system has remote monitoring functions through the employment of Artik as the IoT platform, more advantages in installation, maintenance and expanded functionality can be obtained compared to the conventional solar tracking system.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.289-289
• /
• 2012

터치패널은 키보드나 마우스와 같은 입력장치를 사용하지 않고, 스크린에 손가락, 펜 등을 접촉하여 입력하는 방식이다. 누구나 쉽게 입력할 수 있는 장점으로 인해 기존에는 현금인출기, 키오스크 등 공공분야에 주로 많이 사용되어 왔으나, 최근의 터치스크린은 휴대폰, 게임기, 네비게이션, 노트북 모니터 등 개인정보기기의 입력장치로 활용분야가 넓어져가고 있다. 최근의 정전용량 방식의 터치패널은 디스플레이 패널 위에 올여지는 형태의 Add on type이며, 테블렛의 출현으로 터치패널의 사이즈가 커지면서 인듐산화물 투명성 전도막의 두께가 두꺼워지고, 이로 인하여 광학적 특성인 투과율이 저하되는 문제가 발생하여 투과율을 높여주기 위한 새로운 전도박막 제조방법이 요구되는 상황이다. 현재의 고글절 산화물(TiO2)과 저굴절 산화물(SiO2)의 적층형태의 저반사 특성의 다층막은 주로 플라즈마 보조의 전자빔 증착기를 이용하여 제조되기 때문에, 저반사 특성이 우수하지만 대면적 크기의 대량생산에는 적합하지가 않다. 그리고 태양전지의 에너지 변환효율도 태양전지로 흡수되는 태양광의 량에 크게 의존하기 때문에, 태양전지로 흡수되는 태양광 량을 높이기 위하여 태양전지의 가장 위층에 혹은 모듈 제작시 커버유리의 내부에 저반사 특성을 갖는 박막을 코팅한다. 특히 박막태양전지의 경우는 대면적의 유리위에 저반사 코팅을 해야 한다. 본 연구에서는 In-line magnetron sputtering system을 사용하여 소다라임 유리 기판 위에 고글절 산화물(Nb2O5)과 저굴절 산화물(SiO2)의 2층 적층형태의 "SiO2/Nb2O5/SiO2/Nb2O5/SLG" 다층 박막을 증착하고, 저반사의 광학적 특성을 하였고, 이를 논하고자한다. 일반적으로 빛이 투과되는 투명한 기판이 공기층에 노출되어있을 경우에 기판의 양면에서 공기층과의 계면에서 각각 4%의 반사율 즉, 총 8%의 반사율을 갖는데, 본 연구의 다층 박막에서는 530에서 540nm 파장 영역에서 투과율은 95% 이상, 반사율은 4.8% 이하이었다. 이 결과는 터치패널과 박막태양전지 시장의 Needs에 대응할 수 있기 때문에 산업의 응용측면에서 매우 중요한 연구 성과를 얻었다고 말할 수 있다. (본 연구는 지식경제부 사업화연게기술개발 연구지원금으로 일부 이루어졌음).

• Journal of Korean Association for Spatial Structures
• /
• v.8 no.5
• /
• pp.19-23
• /
• 2008

• Construction Engineering and Management
• /
• v.17 no.1
• /
• pp.35-36
• /
• 2016

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.50.1-50.1
• /
• 2011

전력수요가 적을 때 잉여전력을 저장하고 전력수요가 많은 시간대나 전기료가 비싼 시간대에 저장된 전력을 사용함으로서 전력의 활용 효율을 높이고, 전력공급 시스템을 안정화하기 위해 에너지저장시스템의 연구가 최근에 활발히 진행되고 있다. 또한 공장, 산업용빌딩이나 병원 등 고르고 안정적인 전력의 수요는 늘어나고 있으며, 화석 연료 고갈 문제로 인한 신재생에너지 발전의 중요성도 대두되고 있다. 본 논문에서는 무정전 전원장치, 태양광발전시스템, 에너지 저장 시스템을 모두 통합하였다. 제안한 시스템은 3상 인버터, 부스트 컨버터, 양방향 컨버터, 사이리스터 스위치로 구성된다. 인버터는 계통과 연계되거나 UPS 동작 시 AC 전력을 만든다. 부스트 컨버터는 태양광 패널과 연결되어 MPPT 제어를 수행한다. 양방향 컨버터는 잉여전력을 배터리에 저장을 하고, 전력이 부족할 시에는 배터리의 전력을 방전한다. 사이리스터 스위치는 정전 시 계통과 부하를 끊어주는 역할을 한다. 본 논문에서는 15kW급 시스템으로 구현하여 검증하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.7
• /
• pp.212-217
• /
• 2020

The PV power generation system is a comprehensive system that transmits the power generated through a PV panel to a grid connection and is composed of a solar panel, a structure, and an inverter grid connection system. One technology to increase the amount of power generated involves changing the incident angle of sunlight. This study examined the structure and control of a single-axis tracking PV system that increases the amount of power generated by changing the incident angle. The core content is a single-axis control system and technology configured to rotate the solar structure in the east-west direction around the north-south axis. A solar structure that follows the sun from sunrise to sunset in the east-west direction needs to secure structural stability and solar tracking control performance. A single-axis tracking system can generate up to 25% more power.

• Journal of the Korean Solar Energy Society
• /
• v.30 no.2
• /
• pp.10-15
• /
• 2010

The experimental study was conducted to optimize the system dissipating properly heat from the in-situ solar panel installed on the roof. For this purpose, six 12-Watt panels, which were consisted of the different design conditions such as containing phase change material(PCM), changing the array of the aluminum fin and honeycomb at the back of the panel, were tested. PCM, which had $44^{\circ}C$ melting point, was chosen in this study. In order to enhance absorbing and expelling heatin PCM, profiled aluminum fin was placed either inward oroutward from the panel. Furthermore, Aluminum honeycomb is imbedded in the back container to find if it would improve the thermal conductivity of PCM. During the experiment, there were ranged to $26^{\circ}C\sim32^{\circ}C$ for outdoor temperature and $700W/m^2\sim1000W/m^2$ for irradiance. As a result, the solar panel, combined with honeycomb and outward fins with PCM instead of placing the fins inward, is showing the best performance in terms of controling panel temperature and its efficiency.