• Resources Recycling
• /
• v.12 no.5
• /
• pp.50-56
• /
• 2003

To be recycled iron and heat source in EAF, EAF dust and mill scale generated from steelmaking plant should be made to iron carbide. Behavior of reduction and carburization in EAF dust and mill scale is studied to get fundamental data. EAF dust and mill scale are carburized at $650^{\circ}C$ by 100% CO gas. The carbon content of iron carbide(about 9 wt,% C) is higher than that of cementite without free carbon. The 1.2 times of calculated carbon content is suitable for reduction of EAF dust. The reduction temperature is appropriate to $900^{\circ}C$ in EAF dust and $1000^{\circ}C$ in mill scale. The carburization rate of mill scale are faster than those of EAF dust. The composition of super iron carbide is almost $Fe_2$C.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.05b
• /
• pp.689-694
• /
• 1995

원자력용 316LN 스테인레스강의 입계탄화물 석출거동에 미치는 질소 및 Ti, B의 미량원소 영향을 시차열분석기(DSC)와 투과전자현미경(TEM)을 이용하여 관찰하였으며, 이들 결과와 예민화 특성과의 관계성을 분석하였다. Ti과 B의 첨가는 316LN 강의 탄화물 석출온도를 높이며, 탄화물 석출에 필요한 활성화에너지 값은 미첨가강에 비해 높았다. TEM/EDX 분석결과, 예민화된 316 LN 강은 M$_{23}$C$_{6}$ 탄화물이 입계에 석출되며 입계에서 Cr 고같층이 관찰되었다. 반면 Ti 및 B 첨가강은 7$50^{\circ}C$, 20시간 열처리 조건에서도 거의 입계석출물이 존재하지 않았으며 일부 소량 존재하는 입계 석출물은 EDX 분석결과 Mo-rich 상인 Laves 상으로 분석되었다. DSC와 TEM 분석 결과는 Oxalic 시험 및 Modified Strauss 시험에 의한 입계 부시시험결과와 잘 일치하였고, Ti 및 B의 첨가는 Cr의 확산을 저지시켜 입계탄화물의 석출 및 성장을 저지하는 역할을 하며, 316LN 강의 예민화 특성을 양호하게 하였다.

• Korean Journal of Materials Research
• /
• v.6 no.2
• /
• pp.138-144
• /
• 1996

탄소재료 결합모재의 전구체로 핏치류가 많이 이용된다. 본 연구에서는 탄화거동에서 차이를 보이고 있은 석유계와 석탄계 핏치의 첨가량을 10-70wt%까지 배합하여 400-50$0^{\circ}C$ 온도범위에서 열처리하는 동안에 나타나는 흐름거동, 용해도 정도 등을 관찰함으로서 모재로서의 가능성을 평가하였다. 질소분위기에서 열처리속도 2.5$^{\circ}C$/min로 43$0^{\circ}C$까지 승온하여 30분 동안 처리한 결과 석유계 핏치의 첨가량이 50%가 될 때 까지는 핏치의 유동성과 점결력을 좌우하는 것으로 알려질 $\beta$-resin의 양이 45wt%이상으로 나타났으며, 이렇게 혼합된 핏치는 탄화수율도 같은 조건으로 처리된 원료 핏치에 비해 73-100%까지 높은 값을 보임으로서 모재로서의 가능성이 있음을 보였다.

• 한국전기화학회:학술대회논문집
• /
• 1998.10a
• /
• pp.82-82
• /
• 1998

• Proceedings of the Korean Ceranic Society Conference
• /
• 2003.10a
• /
• pp.166.1-166
• /
• 2003

• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.5
• /
• pp.32-39
• /
• 2018

Supercritical injection behavior of liquid hydrocarbon compounds, which are used as main components of propellant fuel, was analyzed. Decane and Methylcyclohexane (MCH) with different critical points were selected as experimental fluid and Shadowgraphy technique was used. Decane and MCH behave differently in the initial state under the subcritical condition. However, near the critical point, the enthalpy of evaporation became close to 0, so that phase change into supercritical fluid occurred, not vaporization process, and no breakup of both fluids occurred.

• Journal of the Korean Wood Science and Technology
• /
• v.49 no.3
• /
• pp.213-225
• /
• 2021

In this paper, we investigated the carbonization characteristics of lignin hydrochar prepared by hydrothermal carbonization and established a model for predicting the carbonization degree using near-infrared spectroscopy and partial least squares regression. The carbon content of the hydrothermally carbonized lignin at the temperature of 200 ℃ was higher by approximately 3 wt% than that of the untreated sample, and the carbon content tended to gradually increase as the heating time increased. Hydrothermal carbonization made lignin more carbon-intensive and more homogeneous by eliminating the microparticles. The discriminant and predictive models using near-infrared spectroscopy and partial least squares regression approppriately determined whether hydrothermal carbonization has been applied and predicted the carbon content of hydrothermal carbonized lignin with high accuracy. In this study, we confirmed that we can quickly and nondestructively predict the carbonization characteristics of lignin hydrochar manufactured by hydrothermal carbonization using a partial least squares regression model combined with near-infrared spectroscopy.

• Korean Journal of Materials Research
• /
• v.10 no.7
• /
• pp.489-492
• /
• 2000

Three different white cast irons alloyed with Cr and Si were prepared in order to study their distribution be-havior in matrices and carbides. The specimens were produced using a 15kg-capacity high frequency induction fur-nace. Melts were super-heated to $1600^{\circ}C$, and poured at $1550^{\circ}C$ into a pepset mold. Three combinations of the alloys were selected so as to observe the distribution behavior of Cr and Si : 0.5%C-25.0%Cr-1.0%Si(alloy No. 1), 0.5%C-5.0%Cr-1.0%Si(alloy No. 2) and 2.0%C-5.0%Cr-1.0%Si(alloy No. 3). Cellular $M_7C_3$ carbides-$\delta$ferrite eutectic were developed at $\delta$ferrite liquid interfaces in the alloy No. 1 while only traces of $M_7C_3$ carbides-$\delta$ferrite eutectic were precipitated in the alloy No. 2. With the addition of 2.0% C and 5.0% Cr, ledeburitic $M_3C$ carbides instead of cellular $M_7C_3$ carbides were precipitated in the alloy No. 3. Cr was distributed preferentially to the $M_7C_3$ carbides rather than to the matrix structure while more Si was partitioned in the matrix structure rather than the $M_7C_3$ carbides. $K^m$ for Cr was ranged from 0.56 to 0.68 while that for Si was from 1.12 to 1.28. $K^m$ for Cr had a lower value with increased carbon contents. The mass percent of Cr was higher in the $M_7C_3$ carbides with increased Cr contents.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1999.11a
• /
• pp.45-45
• /
• 1999

• Proceedings of the Korean Nuclear Society Conference
• /
• 1999.10a
• /
• pp.230.2-230
• /
• 1999