• 제목/요약/키워드: 탄소섬유 강화 복합재

검색결과 135건 처리시간 0.025초

탄소섬유강화 복합재의 열전도율 평가에 관한 연구 (A Study on Evaluation of Thermal Conductivity for Carbon -Fiber-Reinforced-Plastics)

  • 임재규;송준희;최창호
    • 대한기계학회논문집A
    • /
    • 제26권3호
    • /
    • pp.553-559
    • /
    • 2002
  • Carbon-fiber which has very small radial dimension makes us difficult to measure it's properties. So in this paper, we suggest a simple method to measure the thermal conductivity of a carbon-fiber's and carbon-fiber-reinforced-plastics(CFRP) laminates. The thermal conductivity of CFRP laminates was measured experimentally at the same time analytically. The experimental model is based on the one-dimensional analysis of fin sample because CFRP laminates has a thin geometric configuration. The analytical model to measure the thermal conductivity of carbon-fiber is expressed by use of mean-field model which is based on Eshelby's elliptical inclusion problem. Therefore the thermal conductivity of angle-ply laminates can be computed by use of effective longitudinal and transverse thermal conductivities of unidirectional composite of the constituents.

탄소/탄소 복합재료의 마모특성에 대한 탄소섬유 길이의 영향 (Errects of the Length of Carbon Fiber on the Wear Properties of Carbon/Carbon Composites)

  • 하헌승;김동규;박인서;임연수;윤병일
    • 한국재료학회지
    • /
    • 제3권3호
    • /
    • pp.292-299
    • /
    • 1993
  • 본 연구에서는 탄소/탄소복합재료의 마모특성에 대한 탄소섬유 길이의 영향을 고찰하였다. 매트릭스 precursor로 레졸형의 페놀수지와 강화재로 표면처리를 하지않은 PAN계 단섬유형 탄소섬유를 사용하여 액상함침법으로 1회의 고온열처리 공정과 4회의 탄화공정을 통하여 탄소/탄소복합재료를 제조하였다. Disk-on-disk형의 마모시험기를 통하여 상대 마찰재로 AISI 304 stainliss steel을 사용하여 0.6MPa(61 ${\times}{10^3}$Kg/$m^2$)의 압력과 0.71m/sec의 미끄러짐 속도하에서 측정된 탄소/탄소복합재료의 마찰계수는 0.2-0.3이었다. 마찰계수에 대한 섬유의 길이의 영향은 크게 나타나지 않았지만, 마모 속도는 섬유의 길이가 증가함에 따라 증가하는 경향이 나타났다. 본 실헙 결과를 섬유 강화 플라스틱의 마모 모델을 적용하여 고찰하여 본 결과, 섬유의 길이가 증가함에 따라 탄소/탄소복합재료의 마모 속도가 증가되는 경향은 생성된느 마모조각의 크기가 커기기 때문에 나타난 현상으로 판단되었다.

  • PDF

탄소/현무암 섬유강화 하이브리드 복합재료의 성형과 기계적 특성 평가 (Fabrication of Carbon/Basalt Hybrid Composites and Evaluation of Mechanical Properties)

  • 이진우;김윤해;정민교;윤성원;박준무
    • Composites Research
    • /
    • 제27권1호
    • /
    • pp.14-18
    • /
    • 2014
  • 탄소섬유 복합재료는 내열성 및 우수한 기계적 특성을 가지고 있는 우수한 재료이지만 가격이 비싼 결점이 있다. 따라서 본 연구에서는 높은 기계적 강도를 가지며, 가격이 비싸지 않은 재료의 개발을 위해 탄소섬유에 현무암 섬유를 첨가하여 하이브리드 복합재료를 제작하였다. 현무암 섬유의 함유 비율이 높아질수록 강도는 감소하였으며, 탄소의 강화재 비율이 80% 정도에서 CFRP와 유사한 강도를 얻을 수 있었다. 또한 섬유 각각을 적층하여 복합재료를 제작하는 것 보다 섬유사를 혼합시켜 제작한 복합재료에서 더 우수한 기계적 특성을 얻을 수 있었다.

시아네이트 에스터 수지의 화학유변학적 거동 및 탄소섬유강화 고분자 복합재료의 물성 (Chemorheological Behavior of Cyanate Ester Resin and Properties of Carbon Fiber Reinforced Polymer Composites)

  • 나효열;윤병철;김승환;이성재
    • Elastomers and Composites
    • /
    • 제48권2호
    • /
    • pp.133-140
    • /
    • 2013
  • 탄소섬유강화 고분자(CFRP) 복합재료는 고분자 매트릭스 내에 탄소섬유를 강화제로 사용한 복합재료이다. 최근 고온 및 고진공 조건이 요구되는 항공우주 및 전자산업용 고성능 재료로 사용하기 위해 높은 열안정성과 낮은 기체방출 특성을 갖는 CFRP 복합재료가 활용되고 있다. 이러한 용도에 시아네이트 에스터 수지는 가장 적합한 매트릭스 수지로 꼽히고 있다. 본 연구에서는 시아네이트 에스터 수지와 촉매의 조합, 경화 거동 및 경화 사이클을 최적화하기 위해 화학유변학적 거동을 분석하였다. 최적 조건은 촉매 100 ppm을 첨가한 수지 조성물을 $150^{\circ}C$에서 경화한 경우로 나타났다. 열안정성과 기체방출 특성을 분석한 결과 경화된 수지 조성물은 열분해 온도 $385^{\circ}C$ 및 전체질량손실 0.29%를 나타내었다. 설정한 수지 조성 및 경화 조건을 사용하여 CFRP 프리프레그 및 이를 적층한 복합재료를 제조하였다. 복합재료의 인장 탄성률을 이론적 모델과 비교한 결과 매우 일관성이 있었다.

음향방출법에 의한 탄소섬유강화 플라스틱의 파괴특성에 관한 연구 (2) (A Study on the Fracture Characteristics of CFRP by Acoustic Emission (2))

  • 윤종희;이장규;박성완;우창기;김봉각;조진호
    • 한국공작기계학회:학술대회논문집
    • /
    • 한국공작기계학회 2004년도 춘계학술대회 논문집
    • /
    • pp.58-63
    • /
    • 2004
  • This study is to investigate a fracture characteristics of carbon fiber reinforced plastics (CFRP) under the tensile loading as a function of acoustic emission (AE) according to the frequency analysis (transient mode) and AE source location (location mode). It was found that the fracture mechanism of AE frequency analysis was a useful tool for the estimation of different type of fracture in CFRP, i.e., matrix(epoxy resin) cracking, delamitation and fiber breakage same as AE amplitude distribution.

  • PDF

음향방출법에 의한 탄소섬유강화 플라스틱의 파괴 특성에 관한 연구 (1) (A Study on the Fracture Characteristics of CFRP by Acoustic Emission (1))

  • 윤종희;박성완;이장규;우창기
    • 한국공작기계학회:학술대회논문집
    • /
    • 한국공작기계학회 2003년도 추계학술대회
    • /
    • pp.283-288
    • /
    • 2003
  • The object of this study is to investigate a fracture characteristics of static tensile test as a function of acoustic emission according to the fiber orientation $\theta=0^{\circ}C$ in carbon/epoxy composites, CFRP. On tensile loading, it was recognized that the fracture characteristics of CFRP in a unidirectional composites. Using the results of the AE analysis(a=2mm), it was found that the amplitude distributions of AE signals corresponding the matrix cracking, fiber debonding or delamination, and fiber breaking are 55~70dB(<200sec), 100dB(200~600sec), and 80dB(>600sec).

  • PDF

탄소섬유 강화 복합재 가공용 드릴 공구 개발 및 홀 가공성 평가 (Development of a Drill Tool for CFRP Machining and Evaluation of Drilling Processing)

  • 사민우
    • 한국기계가공학회지
    • /
    • 제19권3호
    • /
    • pp.8-13
    • /
    • 2020
  • Carbon fiber-reinforced plastics (CFRPs) are extremely strong and light fiber-reinforced plastics containing carbon fibers. CFRPs can be expensive to produce, but are commonly used wherever high strength-to-weight ratio and rigidity are required, such as in the aerospace, automotive, and ship superstructure industries. In CFRP drilling, the tool performance greatly varies depending on the tool shapes, cutting conditions, and diamond coating. This study developed a new type of tungsten carbide drill with multi-blade edges to evaluate the surface quality of CFRP materials according to the coating thickness of diamond-coated drills. Experiments on tool wear, surface roughness, and burr formation were conducted. The bore exit quality of a 12 mμ -coated drill was better than that of a 6 mμ -coated drill. The superior effects of the 12 mμ -coated drill and the good surface quality of CFRP were also demonstrated.

탄소섬유 강화 PA6/PPO 복합재료의 섬유 배향에 따른 충격강도 및 열팽창 거동에 관한 연구 (A Study on the Effect of Fiber Orientation on Impact Strength and Thermal Expansion Behavior of Carbon Fiber Reinforced PA6/PPO Composites)

  • 원희정;성동기;이진우;엄문광
    • Composites Research
    • /
    • 제27권2호
    • /
    • pp.52-58
    • /
    • 2014
  • 사출 성형을 통해 제조된 단섬유 강화 복합재는 사출 성형 중 발생하는 수지 유동으로 인해 동일 시편 내에서도 다양한 섬유 배향을 갖는다. 이러한 섬유의 배향은 최종 복합재의 기계적, 열적 특성에 많은 영향을 주므로, 본 연구에서는 사출 성형된 탄소단섬유 강화 PA6/PPO 복합재의 섬유 배향을 광학 현미경 분석을 통하여 측정하고 섬유의 배향이 복합재의 충격강도 및 열팽창 계수에 미치는 영향을 분석하였다. 충격강도의 경우에 섬유의 배향이 크랙이 전파되는 방향에 수직으로 배향되어 있을수록 더 높은 충격강도를 보였으며, 이는 섬유의 배향에 따른 충격내성 강화 메커니즘과 밀접한 연관성을 보여주었다. 열팽창 계수의 경우에는 섬유가 열팽창률을 측정하는 방향과 동일한 방향으로 배향되어 있을수록 더 낮은 열팽창계수를 보였으며, 이 결과 역시 섬유의 배향이 열팽창 특성에 미치는 메커니즘과 밀접한 연관성을 보였다.

피로 손상 모델을 이용한 직조 탄소섬유강화 복합재료의 피로 손상 평가 (Fatigue Damage Evaluation of Woven Carbon-Fiber-Reinforced Composite Materials by Using Fatigue Damage Model)

  • 박홍선;최정훈;구재민;석창성
    • 대한기계학회논문집A
    • /
    • 제34권6호
    • /
    • pp.757-762
    • /
    • 2010
  • 탄소섬유강화 복합재료는 금속재료에 비하여 높은 비강성과 비강도 등의 우수한 기계적 성질을 나타내고 있으며, 이러한 이유로 최근 경량화가 요구되는 항공기용 재료와 자동차용 재료 등으로 그 사용이 급격히 증가하여 금속재를 대체하고 있다. 그러나 대부분의 기계구조물에서는 반복하중에 의한 피로 파손이 주로 발생하고 있다. 그러므로 섬유강화 복합재를 사용한 기계구조물의 내구성을 확보하기 위해서는 이에 대한 피로 해석 및 내구성 평가가 필요하다. 따라서 피로 손상 모델을 이용하여 피로 시험으로부터 구한 손상량을 이용하여 피로손상 누적곡선을 획득하고 해석하였다.