• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.252.1-252.1
• /
• 2015

최근 화석연료 고갈 문제를 해결하기 위해 대체에너지 개발과 다양한 형태의 에너지 개발에 관한 연구가 활발히 이루어지고 있다. 특히, supercapacitor는 high energy density, high power density, longer life-time과 같은 특성으로 인해 에너지 저장 소자로 각광 받고 있다. Supercapacitor는 석유를 대체할 수 있으며 이산화탄소 배출이 없는 친환경 에너지인 태양광, 풍력, 수소연료전지 등의 신재생에너지 저장장치로써 큰 비중을 차지한다. Supercapacitor의 종류인 electrical double layer capacitors (EDLCs) 는 전극과 전해질 사이에 발생하는 전기 이중층에 축적되는 전하를 이용하여 에너지를 저장하는 반응 메커니즘을 가지며 전극 재료로는 탄소 소재를 사용한다. 탄소 소재는 환경 오염이 적고 가격이 저렴하며 넓은 표면적이라는 장점이 있다. 하지만 기존 탄소 소재는 이러한 장점을 가지지만 supercapacitor로써의 효율이 좋지 않게 나온다. 이런 문제를 개선하기 위하여 그래핀 나노플레이트(Graphene nanoplate, GNP) 위에 직접 탄소나노튜브(Carbon nanotube, CNT)를 성장 시킴으로써 GNP-CNT 하이브리드 탄소 소재를 제조하여 전극으로 사용하였다. 이 GNP-CNT 하이브리드 탄소 소재는 다차원 구조를 가짐으로써 기존 탄소 소재들보다 분산이 잘되고 전해질과의 작용하는 비표면적이 넓다. 전극을 제작하여 Cyclic voltammetry(CV)와 galvano를 측정한 결과는 기존 탄소나노튜브보다 5배 정도의 정전용량(Capacitance)를 가졌다. 이 전극의 구조적 특성을 관찰하기 위해 SEM, TEM 등을 측정하였다.

• Journal of Welding and Joining
• /
• v.7 no.4
• /
• pp.30-37
• /
• 1989

Effect of heat treatment on mechanical properties of an overlay weldment was investigated. Over welding was carried out on the structural C-Mn mild steel substrate to take required test specimens. Shielded metal arc welding process with 13Cr-0.2Ni stick electrode was applied. The heat treatment temperatures and holding times were $450{\circ}C., 550{\circ}C., 650{\circ}C., 750{\circ}C., 850{\circ}C.$ and 0.5hr, 2hr, 10hr, respectively. Mechanical tests and microscopic inspection were also carried out to investigate welds soundness. Test results indicated that carbon migration was dominant near bonded zone. At temperature of around 650.deg. C, carburized layer and decarburized layer were formed remarkably along overlay welds region and C-Mn mild steel region, respectively. The wideth of these layers became wider with increasing heat treatment temperature and/or holding time at the elevated temperature, and this relationship agreed with Larson-Miller parameter. Side bending test results demonstrated that the crack free region of overlay welds could be deduced from the relationship between temperature and holding time.

• Clean Technology
• /
• v.28 no.3
• /
• pp.203-209
• /
• 2022

An environmental evaluation was conducted by employing LCA methodology for a mechanical seal manufacturing process that uses recycled silicon recovered from end-of-cycle PV modules. The recycled silicon was purified and reacted with carbon to synthesize β-SiC particles. Then the particles underwent compression molding, calcination and heat treatment to produce a product. Field data were collected and the potential environmental impacts of each stage were calculated using the LCI DB of the Ministry of Environment. The assessment was based on 6 categories, which were abiotic resource depletion, acidification, eutrophication, global warming, ozone depletion and photochemical oxidant creation. The environmental impacts by category were 45 kg CO₂ for global warming and 2.23 kg C₂H₄ for photochemical oxide creation, and the overall environmental impact by photochemical oxide creation, resource depletion and global warming had a high contribution of 98.7% based on weighted analysis. The wet process of fine grinding and mixing the raw silicon and carbon, and SiC granulation were major factors that caused the environmental impacts. These impacts need to be reduced by converting to a dry process and using a system to recover and reuse the solvent emitted to the atmosphere. It was analyzed that the environmental impacts of resource depletion and global warming decreased by 53.9% and 60.7%, respectively, by recycling silicon from end-of-cycle PV modules. Weighted analysis showed that the overall environmental impact decreased by 27%, and the LCA analysis confirmed that recycling waste modules could be a major means of resource saving and realizing carbon neutrality.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.97-97
• /
• 2015

전 세계적으로 화석연료의 고갈 및 환경오염 문제를 해결하기 위해 신재생에너지에 대한 관심이 급증하고 있다. 이러한 신재생에너지에는 수소 에너지, 자연 에너지(태양열, 지열 등), 바이오 매스 에너지 등이 포함된다. 이 중 수소 에너지는 지구상에 풍부하게 존재하고 있는 물과 탄화수소로부터 얻어지며, 연소 시에도 다시 물을 형성하여 오염 물질을 배출하지 않는 차세대 무공해 에너지원으로써 주목을 받고 있다. 수소 제조를 위한 공정에는 수증기 개질 공정(steam reforming), 부분 산화(partial oxidation) 및 자열개질(autothermal reforming) 등이 있으며 실제로 생산되는 대부분의 수소는 탄소/수소비(1:4)가 높은 메탄($CH_4$) 가스를 이용한 메탄 수증기 개질 공정(steam methane reforming)을 통하여 제조된다. 이 때 수소 제조의 고효율화 및 저비용화를 위해서는 반응물에 대한 높은 선택도, 고활성도 및 높은 안정성을 갖는 촉매가 반드시 필요하며, 대표적으로 Ni, Pt, Ru 등이 보고되고 있다. 이러한 촉매들은 대부분 세라믹 pellet 형태로 제작되어 왔으나 열전도도가 낮고 물리적 충격에 취약하다는 단점이 존재한다. 따라서 우리는 이러한 단점을 극복하고, 촉매의 활성을 높이기 위하여 다공성 금속 합금 폼을 촉매 지지체로 도입하였다. 또한, 다공성 금속 합금 폼 표면에 촉매의 분산 및 안정성을 향상시키기 위해 지지체와 촉매 사이에 원자층 증착법을 이용하여 inter-layer를 도입하였다. 이들의 구조, 형태, 및 표면의 화학적 상태는 주사전자현미경, EDS (energy dispersive spectroscopy)가 탑재된 주사전자현미경, X-선 회절, 및 X-선 광전자 분광법을 이용하여 규명하였다. 더하여 정전압-전류 측정법 및 유도 결합 플라즈마 분광 분석기을 이용하여 전기 화학 반응을 유도하고, 반응 후 전해질의 성분분석을 통해 촉매와 지지체 간의 안정성을 평가하였다. 따라서 본 결과들은 한국진공학회 하계정기학술대회를 통해 좀 더 자세히 논의될 것이다.

• Microbiology and Biotechnology Letters
• /
• v.17 no.6
• /
• pp.611-618
• /
• 1989

Effects of methionine on cephalosporin C(CPC) production in a fluidized-bed bioreactor were investigated using bioparticles of Cephalosporium acremonium. Since methionine was found to be an important metabolic regulator on the synthesis of cephalosporin C, the effects of its concentration in the cuture broth and feeding mode to the bioreactor were studied. It was observed that the presence of initial methionine was essential for higher cephalosporin C production and there existed an optimal content of methionine. Carbon consumption rate also increased significantly under the presence of methionine. Production of cephalosporin C was most active when methionine was exhausted in the broth; however its additional feeding did not enhance the antibiotic production in the fluidized-bed bioreactor as much as expected. It was therfore considered important to feed an optimal content of methionine at the early operating stage for a higher cephalosporin C production in a fluidized-bed bioreactor. An interesting thing to note was that titre of the antibiotic with reused bioparticles was about 2 times higher in the methionine containing medium than that without methionine. Therefore repeated use of bioparticles, with an optimal content of methionine, was believed to be very useful to enhance to process productivity.

• Journal of Mushroom
• /
• v.18 no.1
• /
• pp.1-9
• /
• 2020

Mycorrhiza refers to the association between a plant and a fungus colonizing the cortical tissue of the plant's roots during periods of active plant growth. The benefits afforded by plants from mycorrhizal symbioses can be characterized either agronomically, based on increased growth and yield, or ecologically, based on improved fitness (i.e., reproductive ability). In either case, the benefit accrues primarily because mycorrhizal fungi form a critical linkage between plant roots and the soil. The soilborne or extramatrical hyphae take up nutrients from the soil solution and transport them to the root. This mycorrhizae-mediated mechanism increases the effective absorptive surface area of the plant. There are seven major types of mycorrhizae along with mycoheterotrophy: endomycorrhizae (arbuscular mycorrhizae, AM), ectomycorrhizae (EM), ectendomycorrhizae, monotropoid, arbutoid, orchid, and ericoid. Endomycorrhizal fungi form arbuscules or highly branched structures within root cortical cells, giving rise to arbuscular mycorrhiza, which may produce extensive extramatrical hyphae and significantly increase phosphorus inflow rates in the plants they colonize. Ectomycorrhizal fungi may produce large quantities of hyphae on the root and in the soil; these hyphae play a role in absorption and translocation of inorganic nutrients and water, and also release nutrients from litter layers by producing enzymes involved in mineralization of organic matters. Over 4,000 fungal species, primarily belonging to Basidiomycotina and to a lesser extent Ascomycotina, are able to form ectomycorrhizae. Many of these fungi produce various mushrooms on the forest floor that are traded at a high price. In this paper, we discuss the benefits, nutrient cycles, and artificial cultivation of mycorrhizae in Korea.