• Proceedings of the KAIS Fall Conference
• /
• 한국산학기술학회 2012년도 춘계학술논문집 2부
• /
• pp.738-740
• /
• 2012

최근 변단면 거더의 경제성을 고려하여 장경간 거더 교량과 강골조 구조물에 변단면보의 사용이 증가하고 있으며, 고강도 강의 등장으로 인해 변단면보의 정확한 좌굴 강도의 평가가 매우 중요시 되고 있다. 본 논문에서는 기존에 연구된 탄성 횡-비틀림 좌굴 강도에 관한 연구를 바탕으로하여 별로 비탄성 구간에 비지지 길이가 존재하는 일축대칭 I형 변단면보의 횡-비틀림 좌굴 강도 해석을 실시하였다. 해석에는 유한요소해석프로그램인 ABAQUS(2007)가 사용되었으며, MINITAB(2006)을 이용하여 간편한 설계식을 제안하고 있다. 일단 계단식 단면을 가지는 보에 대하여 고려하였으며, 플랜지 길이 방향 비, 너비방향 비, 두께의 비로 계단식 I형 보를 나타내었다. 집중 하중을 적용시켰으며 비선형 해석을 위해 잔류응력 및 초기변형과 재료비선형을 고려하였다. 본 연구 결과에서 제안된 식은 향후 다양한 하중이 작용하는 비탄성 횡-비틀림 좌굴 강도에 대한 연구에 많은 도움이 될 것이다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• 제16권6호
• /
• pp.1075-1088
• /
• 1992

This paper presents techniques used to model a two arm experimental robot. Both arms are compliant and the robot operates in a vertical plane and is therefore influenced by gravity. The robot is being built to study different control strategies for robots containing compliant members. The system is built with extremely flexible members. This limits the required bandwidth of the control electronics, and mimics the flexible motions that are observed for stiffer faster robots. The objective of this paper is to develop a reduced order model of the robot system and to experimentally validate the model. Validation requires that the model includes gravitational effects. Therefore, an assumed modes model is developed which facilitates modeling of gravitational effects. In order to select the order and mode shapes for the model, an analytical solution is derived for a linearized continuous model. This is compared to the assumed modes model to determine the number of mode shapes needed to model the system. The final model, which includes shortening effects, correlates very well with experimental results.

• Korean Journal of Materials Research
• /
• 제11권5호
• /
• pp.354-360
• /
• 2001

By applying Eshelby's theory on the'transformation' and' inhomogeneity'problems of an ellipsoidal inclusion, a microscopic stress-strain is formulated for a composite material consisting of a matrix and a large number of aligned ellipsoidal inclusions. Some of the composites of practical interest, such as unidirectionally fiber- reinforced, Particle dispersion strengthened and layered composites can be treated by changing the axial ratios of the ellipsoidal inclusion. The macroscopic stress-strain relation obtained is applicable to elastic and elasto-plastic deformation of the composite in uniform loading.

• Journal of the Society of Naval Architects of Korea
• /
• 제35권4호
• /
• pp.46-54
• /
• 1998

In this paper, the erect of notch geometries on dynamic stress concentration was investigated by using the dynamic photoelasticity and the drop weight loading system Dynamic stress fields arisen by elastic wave through the loading system around various types of notch geometries were captured by using $10^6/sec$ frame rate Cranz-Shardin camera system with 12 photographic frames. We found that dynamic stress concentrations around the notch tip and comer were highly dependent on the change in notch geometries. The elders of dynamic stress singularity ware determined with respect to varying geometries of notches and we explained dynamic stress concentration in terms of the orders of dynamic stress singularity.

• Journal of the Korean Society for Nondestructive Testing
• /
• 제32권1호
• /
• pp.27-33
• /
• 2012

Photoelasticity is a technique of experimental methods and has been widely used in various domains of engineering to determine the stress distribution of structures. Without complicated mathematical formulation, this technique can conveniently provide a fairly accurate whole-field stress analysis for a mechanical structure. Here, stress distribution around an inclined crack tip of finite-width plate is studied by 8-step phase-shifting method. This method is a kind of photoelastic phase-shifting techniques and can be used for the determination of the phase values of isochromatics and isoclinics. According to stress-optic law, the stress distribution could be obtained from fringe patterns. The results obtained by polariscope arrangement combined with 8-step method and ABAQUS FEM simulations are compared with each other. Good agreement between them shows that 8-step phase-shifting method is reliable and can be used for determination of stress by experiment.

• The Korean Journal of Rheology
• /
• 제7권3호
• /
• pp.203-210
• /
• 1995

전기장 하에서 폴리아닐린/미네랄 오일 현탁액의 유변학적 특성에 관한 실험적인 연 구를 큐엣 셀 형태의 레오미터를 사용하여수행하였다. 폴리아닐린 현탁액은 전기장을 가해 줄 때 점도가 크게 상승하는 현상을 보였고 부피분율과 전기장의 3/2승에 비례하는 동적 항 복응력을 나타내었다. 작은 변형 진폭의 동적 상태 실험을 통하여 저장계수와 손실계수를 변형진폭, 변형의 구동 주파수 및 전기장의 함수로 나타내었다. 저장계수는 전기장을 증가시 킬 때 증가하나 손실계수(5wt%)는 약한 전기장 의존성을 보였다. 낮은 응력을 가해줄때의 크립과 회복곡선은 초기의 순간적인 변형 증가와 지연되는 변형 그리고 회복 불가능한 영구 적 변형으로 구성되어진다. 탄성 한계 항복응력은 전기장의 세기가 증가함에 따라 증가하였 다. 매우 작은 변형에서는 응력과 변형사이의 선형적 관계를 보여 고체와 유사한 거동을 나 타내었다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• 제39권2호
• /
• pp.143-156
• /
• 2015

The stress and displacement fields at the crack tip were studied during the unsteady propagation of a mode III crack in a direction that was different from the property graduation direction in functionally graded materials (FGMs). The property graduation in FGMs was assumed based on the linearly varying shear modulus under a constant density and the exponentially varying shear modulus and density. To obtain the solution of the harmonic function, the general partial differential equation of the dynamic equilibrium equation was transformed into a Laplace equation. Based on the Laplace equation, the stress and displacement fields, which depended on the time rates of change in the crack tip speed and stress intensity factor, were obtained through an asymptotic analysis. Using the stress and displacement fields, the effects of the angled property variation on the stresses, displacements, and stress intensity factors are discussed.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• 제23권5호
• /
• pp.535-541
• /
• 2010

In this paper, we have derived a continuum-based adjoint design sensitivity of general performance functionals with respect to Young' modulus and heat conduction coefficient for steady-state nonlinear thermoelastic problems. An adjoint equation for temperature and displacement fields is defined for the efficient computation of the coupled field design sensitivity. Through numerical examples, we investigated the mesh dependency of the topology optimization method in the thermoelastic problems. Also, comparing the dominant loading cases of thermal and mechanical ones, the loading dependency of topology design optimization in coupled multi-physics problems is investigated.

• The Journal of the Acoustical Society of Korea
• /
• 제18권7호
• /
• pp.75-79
• /
• 1999

The beam patterns of source array and changes in the far-field signatures are compared and analyzed each other in order to identify the seismic capability affected by the misfired source at the multi-channel seismic source array. In the primary pulse amplitude of far-field signature, the 66% of seismic capacity are sustained if approximately 40% of source are misfired among whole gun volume. When the sources with the same distances are misfired at the 154㎐, the beam width of the long- and wide-array which is identical regardless of arraying pattern. The beam width has a tendency to narrow now from 41 to 34 according to increase the volume of misfired source at the long-array beam pattern. Therefore, the source array of small volume are suitable for the shallow seismic survey because of producing adequate beam patterns with narrow beam width.

• Geophysics and Geophysical Exploration
• /
• 제9권1호
• /
• pp.86-92
• /
• 2006

The full-waveform inversion algorithm using normalised seismic wavefields can avoid potential inversion errors due to source estimation required in conventional full-waveform inversion methods. In this paper, we have modified the inversion scheme to install a weighted smoothness constraint for better resolution, and to implement a staged approach using normalised wavefields in order of increasing frequency instead of inverting all frequency components simultaneously. The newly developed scheme is verified by using a simple two-dimensional fault model. One of the most significant improvements is based on introducing weights in model parameters, which can be derived from integrated sensitivities. The model-parameter weighting matrix is effective in selectively relaxing the smoothness constraint and in reducing artefacts in the reconstructed image. Simultaneous multiple-frequency inversion can almost be replicated by multiple single-frequency inversions. In particular, consecutively ordered single-frequency inversion, in which lower frequencies are used first, is useful for computation efficiency.