• Composites Research
• /
• 제26권1호
• /
• pp.21-28
• /
• 2013

본 논문에서는 유효 면적의 제한이 있는 복합재 적층판의 탄도한계속도를 예측하였다. 탄도한계속도를 예측하기 위해 정적압입 관통실험과 고속충격 실험 그리고 준실험식을 이용하였다. 정적압입 관통실험을 통해 하중-변위 데이터를 취득하고 이를 이용해서 관통에너지를 측정하였다. 고속충격 실험을 통해 실제 관통 속도 및 관통 에너지를 측정하였다. 정적압입 관통실험과 고속충격 실험을 통해 구한 에너지를 이용해 준실험식을 만들고, 준실험식과 고속충돌 실험결과와 비교해 보았다. 위 방법을 이용해 탄도한계속도를 예측하였고 정적압입 관통 실험과 준실험식에 의한 탄도한계속도 예측의 타당성을 확인하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 추계학술대회 논문요약집
• /
• pp.210-210
• /
• 2003

• 한국자동차공학회논문집
• /
• 제13권4호
• /
• pp.113-120
• /
• 2005

In order to investigate the characteristics of penatration and the effect of surface treatment in A15052-H34, Al5082-Hl31 and titanium alloy laminates which were treated by anodizing and PVD(Physical Vapor Desposition) method, ballistic tests were conducted. Thickness of surface membrane in A15052-H34, Al5082-Hl31, were $25{\mu}m$ and that of titanium $0.9{\mu}m$ respectively. Surface hardness test was conducted using micro Vicker's hardness tester. Resistance to penetration is determined by the protection ballistic limit(V50), a statistical velocity with $50\%$ probability for complete penetration. Fracture behaviors and ballistic tolerance, described by penetration modes, are observed from the results of V50 test and Projectile Through Plate(PTP) test at velocities greater than protection ballistic limit, respectively. Present experimental results derived from this research help to optimize laminate impact behavior by varing the laminate thickness and surface treated materials.

• 한국군사과학기술학회지
• /
• 제16권6호
• /
• pp.803-810
• /
• 2013

In this paper, we have verified the performance of ballistic resistance material on wet condition. Considering Korea terrain, soldiers may face many rivers and streams. However, bullet-proof jacket has no waterproofing and there's no water-proof standard in Military. Wearing wet bullet-proof jacket, soldiers can't be protected properly because of the decrement of jacket. Thus, we measure the performance of existing material on wet condition and analyze failure mechanism in order to indicate factors to improve bullet-proof jacket.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2000년도 제14회 학술강연논문집
• /
• pp.19-19
• /
• 2000

항공 탄도학 분야에 있어서 여러 다양한 형태의 발사장치들이 제시된 바 있으나, 고속 분야에서 최고의 성능을 인정을 받은 것은 constant-base-pressure gun의 개념에서 나온 2-단계 기포(two-stage light gas gun)이다. 이러한, 2-단계 기포는 1, 2차 구동부와 피동부로 구성되며, 작동 원리가 간단하고 여러 작동 인자들의 변화를 통하여 성능 향상을 이룰 수 있다. 반면에 구조적인 강도 문제로 인한 작동 한계가 있으며 내부에서는 고온, 고밀도의 영향으로 추진기체에 Nonideality현상 등이 일어난다.

• 대한조선학회논문집
• /
• 제54권4호
• /
• pp.286-293
• /
• 2017

This paper presents ballistic limit velocity results of a variety of materials generally used in warships. Ballistic limit velocity is the velocity required for a projectile to penetrate a target with 50 percents of time and is widely used as a measure of armour bulletproofing. For this study, live fire experiments were implemented using AK-47 $7.62{\times}9mm$ mild steel core as a projectile as well as various thickness warship materials as a target. Also, methods of MIL-STD-662F, NIJ-STD-0101.06 and support vector machine were applied to measure the ballistic limit velocity and then their results were graphically analyzed for comparison. The minimum of their results was considered as the ballistic limit velocity in a conservative way.

• 한국군사과학기술학회지
• /
• 제11권6호
• /
• pp.164-171
• /
• 2008

A modified generalized particle algorithm, MGPA, was suggested to improve the computational efficiency of standard SPH method in numerical analysis of high speed impact behavior. This method uses a numerical failure mechanism than material failure models to describe the target penetration. MGPA algorithm was more effective to describe the impact phenomena and new boundaries produced during the calculation process were well recognized and treated in the target penetration problem of a bullet. When bullet perforation problems were analyzed by this method, MGPA algorithm calculation gives the stable numerical solution and stress oscillation or particle penetration phenomena were not shown. The error range in ballistic velocity limit is less than $2{\sim}13%$ for various target thickness.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.273-278
• /
• 2003

Recently, high-performance hybrid composite materials have been used for various industrial fields because of their superior high strength, high stiffness and lower weight. In this study, manufactured hybrid composite materials are composed of two parts. One is hard-anodized Al5083-O alloy as a face material and the other is high strength aramid fiber ($Twaron^{(R)}$ CT709) laminates as a back-up material. Resistance to penetration is determined by protection ballistic limit($V_{50}$, a static velocity with 50% probability for complete penetration) test method. $V_{50}$ tests with $0^{\circ}$obliquity at room temperature were conducted with 5.56mm ball projectiles that were able to achieve near or complete penetration during high velocity impact tests.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.267-272
• /
• 2003

In order to investigate the effect of face material on Ti/Al alloy laminates under high velocity impact, a ballistic testing was conducted. Ballistic resistance of these materials was measured by protection ballistic limit($V_{50}$), a statistical velocity with 50% probability penetration. Fracture behaviors and ballistic tolerance, described by penetration modes, were respectfully observed, by $V_{50}$ test and Projectile Through Plates (PTP) test at velocities greater than $V_{50}$. PTP tests were conducted with $0^{\circ}$obliquity at room temperature using 5.56mm ball projectile. $V_{50}$ tests with $0^{\circ}$obliquity were also done with projectiles that were able to achieve near or complete penetration during PTP tests. Resistance to penetration, and penetration modes which face material was Titanium alloy, were compared to those which face material was anodized Al alloy after cold-rolling.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1378-1381
• /
• 2003

Recently, high-performance composite materials have been used for various industrial fields because of their superior high strength, high stiffness and lower weight. In this study, manufactured fiber reinforced metal laminate materials are composed of two parts. One is hard-anodized A15083-O alloy as a face material and the other is high strength aramid fiber (Twaron CT709) and polyethylene fiber(Dyneema HB25) laminates as a back-up material. Resistance to penetration is determined by protection ballistic limit(V$\sub$50/, a static velocity with 50% probability for complete penetration) test method. V$\sub$50/ tests with 0$^{\circ}$ obliquity at room temperature were conducted with 5.56mm ball projectiles that were able to achieve near or complete penetration during high velocity impact tests.