• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.1
• /
• pp.34-47
• /
• 2018

As interest in advanced countries regarding the convergence technology development increases, a methodology for identifying the core convergence technology that has a large spill-over effect on the technology and industry is required for the nation's competitiveness enhancement in the convergence technology field. Based on patent citation network analysis using 1,124 USPTO patents in the ICT convergence technology field of the smart factory, this study examined the proposed heterogeneous technology convergence index as a tool for measuring the convergence characteristics of the spillovers compared to other indexes (i.e. other sector ratio index and homogeneous technology convergence index). The proposed heterogeneous technology convergence index was used to investigate core technology sectors among ICT technology sectors of smart factory identified by government ministries. Results found 6 core ICT convergence technology sectors including the manufacturing execution analysis application sector. Also, this study conducted blockmodeling analysis using the IPC codes of patents in the manufacturing execution analysis application sector, and identified that the blocks representing the electronic communication and electric digital data processing technology sectors (Block 3 & 4) are related technology sectors which can be converged with core technology. Based on the findings, the implications for the convergence technology development planning of the smart factory field are discussed.

• Journal of Korean Society of Forest Science
• /
• v.83 no.4
• /
• pp.441-449
• /
• 1994

The two reflective channels(red and near infrared spectrum) of advanced very high resolution radiometer(AVHRR) data were used to classify primary vegetation cover types in the Korean Peninsula. From the NOAA-11 satellite data archive of 1991, 27 daytime scenes of relatively minimum cloud coverage were obtained. After the initial radiometric calibration, normalized difference vegetation index(NDVI) was calculated for each of the 27 data sets. Four or five daily NDVI data were then overlaid for each of the six months starting from February to November and the maximum value of NDVI was retained for every pixel location to make a monthly composite. The six bands of monthly NDVI composite were nearly cloud free and used for the computer classification of vegetation cover. Based on the temporal signatures of different vegetation cover types, which were generated by an unsupervised block clustering algorithm, every pixel was classified into one of the six cover type categories. The classification result was evaluated by both qualitative interpretation and quantitative comparison with existing forest statistics. Considering frequent data acquisition, low data cost and volume, and large area coverage, it is believed that AVHRR data are effective for vegetation cover type mapping at regional scale.

• Journal of Wetlands Research
• /
• v.15 no.3
• /
• pp.367-380
• /
• 2013

In this study, sub-indicators, and thematic mid-indexes to evaluate the water use characteristics were selected through historical data analysis and factor analysis, and consisted of the subject approach framework. And the integrated index was developed to evaluate water use characteristics of the watershed. Using developed index, the water use characteristics were assessed for 812 standard basins with the exception for North Korea using data of 1990 to 2007 from the relevant agencies. A sensitivity analysis is conducted for this study to determine the proper way through various normalization and weighting methods. To increase the objectivity of developed index, the history of the damage indicators are excluded in the analysis. In addition, in order to ensure its reliability, results from index with and without consideration of the damage history were compared. Also, the index is also applied to real data for 2008 Gangwon region to verify its field applicability. Through the validation process this index confirmed the adequacy for the indicators selection and calculation method. The results of this study were analyzed based on the spatial and time vulnerability of the basin's water use, which can be applied to various parts such as priority decision-making for water business or policy, mitigations for the vulnerable components of the basin, and supporting measures to establishment by providing relevant information about it.

• Korean Journal of Construction Engineering and Management
• /
• v.13 no.6
• /
• pp.54-62
• /
• 2012

Currently, construction engineering industry of high value and rapid growing has been viewed as a future oriented industry. Thus, compared to other industries, its analysis system for business trend seems insufficient. This research has developed a business survey index model targeted for construction engineering industries, and business trends for 4/4 quarter of 2011 as well as 1/4 quarter of 2012 were surveyed as important traits were analyzed. Business Survey Index of Construction Engineering has been constructed in form of an index in order to accurately judge different economic states of the industry such as funding areas, human resources, payability, ordering scale, status of domestic and foreign markets, Difficulties in Management, and improvements in policies. In the future, CEBSI will not only be applied on the construction engineering industry, but it will also be used as the economic state of all construction industries as well as the prospect data. Thus, it will be utilized as basic resources that can establish systematic and accurate policies.

• Journal of the Korea Institute of Building Construction
• /
• v.17 no.6
• /
• pp.517-525
• /
• 2017

Red mud is an industrial by-product produced during the manufacturing aluminum hydroxide ($Al(OH)_3$) and aluminum oxide($Al_2O_3$) from Bauxite ores. In Korea, approximately 2 tons of red mud in a sludge form with 50% moisture content is produced when 1ton of $Al_2O_3$ is produced through the Bayer process. In the paper, dispersion characteristics of liquefied red mud that does not require heating and grinding process for recycling were investigated through viscosity and sediment index. The results showed that the sediment index of liquefied red mud increased but viscosity of that decreased with a higher W/R ratio. Also we proposed the range of initial viscosity from 2000cP to 8000cP and target sedimentation index below 20% at elapsed time 180days for stable dispersion of liquefied red mud.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2007.04a
• /
• pp.257-263
• /
• 2007

본 논문은 내구성(durability) 및 내오염성(soiling resistance)이 매우 중요한 성질로 인식되는 유통지의 평가방법을 제안하는데 목적이 있다. 즉, 종이의 내구성 및 내오염성의 측정 및 평가에 있어서, 재현성 및 반복성이 우수하고 합리적인 측정방법 및 평가방법을 구축하는데 목적이 있다. 연구목적에 적합한 시료의 준비, 오염물의 조성, 실험장치 및 실험후의 타당한 평가방법 등에 대하여 선행 연구결과를 고찰하였다. 기존 방법의 수정과 새로운 장치의 제작 및 평가방법의 설정을 통해 재현성이 높은 평가방법을 정립하고자 하였다. 유통지의 내구성을 평가하는 방법으로는 습식, 내오염성, 건식 내오염성, 구김기공도, 내세탁성, 잉크 내마모도 등의 항목을 측정하여 개별항목으로 내구성을 가늠하거나, 몇가지항목에 각기 다른 가중치를 부여하여 구한 내구성 지수(durability index)의 개념으로 내구성을 평가하기도 한다. 본 논문에서는 내구성에 영향하는 요소로 강도적 성질요소(strength property value)와 내오염성 요소(artificial soiling value)로 구분하였다. 강도적 성질요소에서는 전통적으로 내구성과 관련이 깊은 것으로 인식되어 온 내절도(folding endurance), 인열강도(tearing resistance) 및 구김기공도(crumpled porosity)를 인쇄하기 전 용지상태에서 측정하여 4:4:2의 가중치를 주어 구하였다. 내오염성 요소는 국가별 기후특성에 따라 연평균 상대습도가 60% 이상인 경우 인쇄 시료를 대상으로하여 습식 내오염성, 건식 내오염성 및 내석검성을 평가한 후 6:3:1의 가중치를 주어 구하였다. 또한 연평균 60% 미만인 국가의 경우 3:6:1의 가중치를 부여하였다. 이렇게 구해진 강도적 성질요소와 내오염성 요소에 있어 강도적 성질요소는 궁극적으로 내오염성 요소에 영향하기 때문에 3:7의 비율로 가중치를 부여하여 최종적으로 내구성 지수를 구하였다. 이때의 점수가 60점 이상이면 내구성 용지로 정의하였다. 본 논문에서는 현장실험을 통하여 시제품을 제조하였다. 상기 설명된 방법으로 내구성 지수를 구한 결과, 일반 유통지 제조방법으로 제조한 경우 내구성 지수가 약 45점이었다. 반면, 새로 개발된 방법에 의한 고내구성용지(durability paper)의 경우 70점 이상을 나타내어 내구성이 향상되었음을 확인할 수 있었다.

• Journal of Navigation and Port Research
• /
• v.32 no.6
• /
• pp.439-445
• /
• 2008

Various turning tests were carried out according to the rudder angle, turning direction, and the speed etc. with the ship's maneuverability measuring system on the training ship HANBADA. After that they were compared with each other on the turning circle, maneuvering performance index and the distance of new course, and then found out that they were satisfied with the IMO maneuvering standards. And the turning circles of port were smaller than those of starboard with all the rudder angles and maneuvering indexes such as K and T were relatively bigger than other vessels. Also, the distance cf new course was measured to $125{\sim}300m$ in case of the new course on $30^{\circ}{\sim}90^{\circ}$. All of these results will be helpful to escape from collision and to alter course on coastal voyage.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.1
• /
• pp.21-29
• /
• 2003

In this study, practical guidelines to check the possibility of some lateral movement of piled abutment were investigated. In these tests, both the depth of soft clay and the rate of embankment construction are chosen to examine the effect on lateral soil movements. The depth of soft clay layer varies from 5.2 m to 11.6 m, and the rate of embankment construction has two types : staged construction(1m/30days, 1m/15days) and instant construction. Various measuring instruments such as LVDTs, strain gauges, pressure cells, and pore pressure transducers are installed in designed positions in ordo. to clarify the soil - pile interaction and the short and long term behavior f3. piled bridge abutments adjacent to surcharge loads. The validity of the proposed guidelines by centrifuge test was compared with the observed performance by lateral movement index, F(Japan Highway Public Corporation) and modified I index(Korea Highway Corporation). Based on the results obtained, the critical values off and modified I, as a practical guidelines, are proposed as 0.03 and 2.0, respectively.

• Journal of the Korean Data and Information Science Society
• /
• v.25 no.2
• /
• pp.317-325
• /
• 2014

Evaluating contents and quality of the journal along with the research ability of researcher is becoming an important issue recently. This research compared level of impact of the journals related to statistics in nation, 'Journal of the Korean Data & Information Science Society'-centric, using various KCI citation index. Moreover, this research surveyed network between the journals in the aspect of social network analysis, using co-citation frequency. From that, the following conclusions were drawn. First, percentage of self-citation was relatively high. Second, even though Statistics journal had higher impact index than the mathematics, physics and chemistry, frequency of citing statistics journal in other journals was not that high. Third, 'Journal of the Korean Data & Information Science Society' serves central role in network analysis, however it seems that more efforts are required.

• Korean Journal of Construction Engineering and Management
• /
• v.12 no.3
• /
• pp.83-90
• /
• 2011

Although the CM(construction management) market in Korea has shown rapid growth, unlike other market sectors, there has been lack of a system by which the economy trend of the CM market can be analyzed. The objective of the paper is to analyse and identify key characteristics of the CM market as of the third quarter of 2010 by using the CMBSI(Construction Management Business Survey Index) which was proposed in the previous study. In the paper, the CMBSI is used as the main index along with other five supplementary indices. The use of the CMBSI can contribute to enhancing the understanding of CM market situation and prospect, and also to providing information for CM policy and regulations.