• Journal of the Korea Institute of Building Construction
• /
• v.21 no.1
• /
• pp.11-19
• /
• 2021

The aim of the research is providing a fundamental data on quality and constructability of direct tile setting method depending on various cement to sand ratio for tiling dry cement mortar. A large number of tile setting failures reported is related with the cement mortar and its construction for tiling. Because of different materials of tiles, the properties of tiling dry cement mortar, an adhesive for tiling, can influence on quality and constructability of tiling differently. Practically, the easiest way of controlling the properties of the tiling dry cement mortar is to control the proportion of cement and sand. Hence, in this research, sand to cement ratio (S/C) was controlled. Since there is no standarized method on evaluating performance of dry cement mortar for tiling, a several sensory evaluation methods were suggested and executed. According to the experiments conducted in this research, the adhesive performance of cement mortar for tiles can be different depending on the sides such as tile and substrate. Additionally, depending on S/C, finishability, initial adhesive performance, and tile shifting resistance can be changed for ceramic tile. Therefore, under the conditions of this research, about 5 of S/C can be recommended for appropriate performace of tiling dry cement mortar.

• 프린팅코리아
• /
• s.19
• /
• pp.108-109
• /
• 2004

우리는 흔히 아이들의 방을 꾸며 줄 때, 장판이나 벽지를 아이들이 좋아하는 캐릭터가 들어간 제품을 선택하고 시공을 전문인들에게 맡기는 경우가 대부분이다. 그러나 '점착타일'은 누구나 손쉽게 원하는 디자인을 선택하고 원하는 형태대로 장판대신 깔 수가 있다. 이 점착타일은 장판과는 달리 점착제가 미리 발라져 있어서 이형지만 떼어내고 원하는 형태로 붙일 수 있기 때문에 전문 시공인이 아니더라도 누구나 쉽게 할 수 있다는 장점이 있다.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.05a
• /
• pp.183-184
• /
• 2021

Defects such as falling and cracking of tiles installed in the bathrooms of apartment houses are frequently occurring. Therefore, in order to solve this problem, the A/S cost of construction companies and consumer complaints are increasing. The causes of tile defects include problems such as the selection of tile adhesive and lack of adhesive strength, the carelessness of the installer, the base surface, and the absorption rate of the tile. Therefore, in this study, an adhesive construction method using tile adhesives with high resistance to deformation of floors and tiles was studied. In addition, the properties and construction methods of tile adhesives were evaluated.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.11a
• /
• pp.35-36
• /
• 2017

This study used Geopolymer to study tile waterproofing adhesives. The materials used in this study were polymer and acrylic resin, and were evaluated based on adhesion and water resistance. In particular, the adhesion was evaluated under various conditions, and the substrate was comparatively evaluated on the concrete and tile surface conditions.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.11a
• /
• pp.209-210
• /
• 2017

Recently, bathroom tile defects in households are occurring more frequently. Until now, the destructive investigation method has been required to analyze tile defects. This study proposes a non-destructive using a thermal emission camera imaging as a possibly more precise method of investigating tile failure compared to previous existing methods.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.05a
• /
• pp.283-284
• /
• 2018

The rear side surface of tiles act have protrusions that helps secure the adhesion between the tile and the mortar for tile setting. Conventional height of the rear side usually ranges between 1 to 1.5 mm, and the molding method is classified in between press type and compression type during the manufacturing process, with most tiles being produced by the former method. In sites where adhesion failures were observed, tiles were taken to examine the cause of defect. It was determined that height was irregular at the rear side surface. Based on these findings, an experiment was conducted to determine the correlation between the rear surface and the bonding strength of tiles.

• Journal of the Korea Institute of Building Construction
• /
• v.23 no.3
• /
• pp.241-249
• /
• 2023

The objective of this research was to engineer a tile module that could efficiently curtail the incidence of tile defects during the construction phase. To assess the potential diminution in defect manifestation, we executed experiments centered on surface condition, the variation in mass before and after the freeze-thaw test, and adhesive strength. Our findings demonstrated that thermal contraction and expansion induced a relatively escalated frequency of defects in the underwater setting for the aluminum mesh, while the steel mesh saw a higher defect incidence in the air environment. Additionally, it was noted that the adhesive strength exhibited a trend towards augmentation as the mesh size dwindled. Collectively, these results suggest that the employment of smaller mesh sizes can foster improved adhesive strength, consequently diminishing tile defects. Further exploration and development of the tile module, informed by these insights, can substantially enhance the efficacy of the construction process.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• v.y2004m10
• /
• pp.27-30
• /
• 2004

The objectives of the present study is to solve problems in PC tile before-fixing method using ordinary concrete by adopting the liquefaction method in manufacturing PC to which the tile before-fixing method is applied, and to provide basic information for the practical use of the PC tile before-fixing method, which uses high workable concrete, through manufacturing a complex body based on the optimal mix proportion,

• Korean Architects
• /
• no.10 s.139
• /
• pp.68-69
• /
• 1980

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.05a
• /
• pp.144-145
• /
• 2015

In this study, it is contemporaneously understood that tile attachment on CRC board do not have a regulated standard on quality control and construction. Furthermore, there is also a definite lack of standardization on nondestructive inspection of tiles. This thesis investigates a diagnosis method of spot bonding tile attachment using infrared thermal camera as a way to propose a systematic nondestructive inspection method after tile construction.