• Proceeding of EDISON Challenge
• /
• 2016.03a
• /
• pp.598-603
• /
• 2016

현대의 스포츠는 과학기술의 발전과 함께 성장하고 있고 골프종목 역시 재료역학적, 공기역학적 발전에 따라 비거리를 점점 늘려가고 있다. 하지만 현재까지의 비거리에 대한 연구는 골프공과 골프채의 재료의 변화와 딤플이 있는 골프공의 공기역학적 연구에 집중해 있었고 요즘에 들어서야 클럽헤드의 공기역학적 형상에 대한 연구가 활발히 진행되고 있다. 본 연구에서는 골프 경기 중 가장 먼 비거리를 만들어 내는 골프채인 드라이버의 단순화된 2차원 클럽헤드 형상을 설정하고 항력을 줄일 여러 가지 방법을 적용하여 최소의 항력을 갖는 헤드 형상을 찾아보았다. 연구결과 $10.2^{\circ}$의 로프트를 갖는 클럽헤드는 chord 길이가 face 높이의 3.2배이고, trailing edge가 face의 중심보다 전체 face높이의 10% 아래에 있을 때 가장 적은 항력을 얻을 수 있었다. 결과적으로 이 형상과 기존형상의 스윙 속도 차는 약 2mph로 5yard의 비거리 차이를 가져온다.

• Journal of Broadcast Engineering
• /
• v.18 no.3
• /
• pp.380-392
• /
• 2013

A method to classify a golf swing motion into 7 sections using a Kinect sensor and a fuzzy system is proposed. The inputs to the fuzzy logic are the positions of golf club and its head, which are extracted from the information of golfer's joint position and color information obtained by a Kinect sensor. The proposed method consists of three modules: one for extracting the joint's information, another for detecting and tracking of a golf club, and the other for classifying golf swing motions. The first module extracts the hand's position among the joint information provided by a Kinect sensor. The second module detects the golf club as well as its head with the Hough line transform based on the hand's coordinate. Using a fuzzy logic as a classification engine reduces recognition errors and, consequently, improves the performance of robust classification. From the experiments of real-time video clips, the proposed method shows the reliability of classification by 85.2%.

• Korean Journal of Applied Biomechanics
• /
• v.19 no.2
• /
• pp.311-322
• /
• 2009

Using the 3-D analysis, this study winpared and analyzed the 'fade-shot swing' which is one of the golf technique. The subjects of this study were 3 male pro golfers they experimented with only a 7 iron. The purpose was to enhance their performance by producing the important kinematical parameters, finding out the features in them and providing the data to a coach and players. As a result, the position of the club head showed from the outside orbit to the inside orbit. When position of the center of mass moved backwards, the probability of the failure of the fade-shot increased. Cocking angle had an effect on easing the wrist for a smooth follow-through after the impact. It showed that the changes in the shoulder movement was made first and followed by the waist. The hip joint angular velocity achieved a smooth fade-shot motion due to the hitting delay also the velocity of the club-head was faster when uncocking was released at the time of impact.

• Korean Journal of Applied Biomechanics
• /
• v.12 no.2
• /
• pp.17-32
• /
• 2002

The purpose of this study was to find the rational method to analyze golf swing with specific property of club shaft. Three subjects were filmed by two high speed digital cameras with 500 fps. The phase analyzed was downswing of each subject. The three-dimensional coordinates of the anatomical landmarks were obtained with motion analysis system Kwon3d 3.0 version and smoothed by lowpass digital filter with cutoff frequency 6Hz. From these data, kinematic and kinetic variables were calculated using Matlab(ver 5.0) The variables for this study were angular velocity and accelerations, which were calculated and following conclusions have been made : 1) Golf swing time of stiff club is faster than that of regular club. 2) In shoulder joint motion of swing with the stiff club, x-stiff showed mort rapid negative acceleration than that of regular club. 3) In regular club, the velocity of club head would be more effective velocity, which was increasing, than those of other clubs before impact. 4) In wrist joint motion of swing with stiff club, x-stiff club showed faster than regular club in the downswing and impact more rapid negative acceleration.

• Korean Journal of Applied Biomechanics
• /
• v.12 no.2
• /
• pp.207-214
• /
• 2002

The purpose of this study was to examine the putter head movement during the putting strokes. Highly skilled 5 golfers(less than 3 handicaps) and 5 novice golfers(having no golf experience) participated in this study. A target distance was 3 m. Movements of the putter head were recorded at 60 Hz with two video cameras(1/500 shutter speed). The results showed that the angle of the clubface of expert golfers was almost 1 degree, but the novice golfers were more than 6 degrees. Expert golfers moved their hands faster than the head movement, therefore the clubface was not opened during impact. However, the novice golfers moved their hands slower than the head movement, therefore the clubface was opened during impact. The ratio of input and output angles of total movement was 1:3-4, however, the ratio of input and output angles of impact zone was 1:2. The angle of normal vector of expert golfers was less than the angle of normal vector of novice golfers.

• Journal of the Korean Applied Science and Technology
• /
• v.38 no.1
• /
• pp.1-8
• /
• 2021

The purpose of this study was to analyze relationship between biomechancal factors and diver's distance during golf driver swing. Fifteen professional golfers were participated in as subject. Eight motion capture cameras(250 Hz), 2 force plates(1000 Hz), and Trackman were used to collect kinematic and kinetic datas. It was performed Pearson's correlation analysis using SPSS 24.0. The level of significance was at .05. Ball speed, club head speed, X-Factor, and ground reaction force were correlated on driving distance, However, smash factor and knee moment were not correlated on driving distnace. Ball speed, club head speed, X-Factor, and ground reaction force were effected to driving distance, but smash factor and knee moment were not effected to driving distance.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.31 no.5
• /
• pp.472-478
• /
• 2011

The purpose of this study was to analyze the kinetic effect of Soft-$golf^{TM}$ instrument on the human body structure. To analyze the kinetic effect of Soft-$golf^{TM}$ instrument, Golf swing using Soft-$golf^{TM}$ instrument and regular golf instrument was captured. And then Upper limbs and lumbar joint torques was calculated via computer simulation. Five man participated this study. Subjects performed golf swing using a regular golf and Soft-$golf^{TM}$ instrument. Golf swing motion was captured using three position sensor, active infrared LED maker and force plate. Golf swing model was generated and simulated using ADAMS/LifeMOD program. As a results, joint torque during Soft-golf swing were lower than regular golf swing. Thus soft-golf swing have joint load lower than regular golf swing and contribute to reduce joint injury.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.1
• /
• pp.217-225
• /
• 2019

The aim of this study was determine to effect of shaft length and physical condition on golf driving performance(head speed, distance and direction). A range of drivers with length between 44 inch, 45 inch and 46 inch limit imposed by R&A rules limited were assembled and evaluated. Club head speed and drive distance and accuracy were determined three category 27 PGA pro golfer (handicaps 0, and height $170cm{\geq}171-175{\geq}175-180cm$) who golf performance. As a results follow : Head speed was significantly difference with 44, 45 between 46inch(p<.01). Distance was significantly difference with 44 between 46inch(p<.05). And direction was significantly difference with 44, 45inch between 46inch(p<.05). Head speed according to height was general similarity among shaft length in 170cm, 171-175cm. Distance were general similarity among shaft length in 170cm, and significantly difference with 44inch between 46inch in 171-175cm(p<.01), and significantly difference with 45inch between 46inch in 176-180cm(p<.05). Direction were significantly difference with 44inch between 46inch in 170cm(p<.05), but do not significantly difference with 44inch between 46inch in 176-180cm, 176-180cm. These results show that shaft length and height can affect head speed, distance and direction.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2013.07a
• /
• pp.123-125
• /
• 2013

우리는 흔히 골프 클럽의 휘둘러 골프공이 맞아 나가는 것을 보게 된다. 본 논문에서는 골프채 헤드가 골프공을 일정속도로 움직여 치고 난 후 골프채의 헤드는 같은 방향으로 일정 속도로 움직일 때 골프공을 치고 날아가는 골프공의 속도를 구한다. 골프공을 치기 전의 속도가 각각 다를 경우의 골프공의 속도를 각각 구한다. 골프를 칠 때 헤드의 속도, 골프공의 질량, 임팩트, 임팩트 후의 날아가는 속도, 그리고 임팩트 후의 이동 방향 등을 쉽게 알아보도록 하는 것이 본 논문의 목적이다.

• Journal of Korea Foundry Society
• /
• v.23 no.3
• /
• pp.114-121
• /
• 2003