• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2010.04a
• /
• pp.280-281
• /
• 2010

컨테이너의 효율적인 이송은 작업 시간이 곧 비용으로 연결되는 항만에서 가장 중요한 요소이다. 따라서 1990년대 중반부터 세계항만은 RMGC(Rail-Mounted Gantry Crane), RTGC(Rubber-Tired Gantry Crane)등의 크레인이 개발되어 야드에서 컨테이너를 적재하는데 널리 이용되어 오고 있으며, 특히 최근에는 CCD카메라, 각종 센서 둥을 이용하여 트랜스퍼 크레인의 무인화를 위해 수많은 연구가 진행되었고 실용화 된 많은 기술들이 현장에서 사용되고 있으나, 여전히 많은 부분이 연구를 필요로 한다. 특히 RTGC의 경우 RMGC에 비해 무인 자동화 연구개발은 미비한 수준이다. 따라서 본 논문에서 RTGC의 무인자동화 작업을 위한 가장 기초라고 볼 수 있는 수학적 모델링을 기반으로한 고정밀도 주행제어기를 설계하고자 한다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.04a
• /
• pp.165-170
• /
• 1995

소음저감 설계기술은 제품의 경쟁력 향상을 위해 일반인이 쉽게 접근할 수 잇는 가전제품, 자동차, 항공기 분야 등에서 많은 연구가 수행되어 왔으며, 최근 소음환경 규제가 강화되고 대형기계의 설치 위치가 주거지역과 가까워지므로 산업용 기계설비의 소음제어에 대한 관심이 점차 증대되고 있다. 특히 디젤 엔진 발전기 세트를 이용해서 전원을 공급하는 산업용 기계에 있어서는 디젤 엔진과 발전기가 주소음원이며, 크게 기계적 소음, 공기 역학적 소음, 그리고 전자기 소음 등으로 분류된다. 본 연구는 이러한 소음을 발생시키는 엔진(Engine), 발전기(Generator), 방열팬(Radiator Fan) 등의 성능을 개선시켜 소음을 감소시키는 것이 아니라, 외부 덮개(Canopy)에 흡음재를 부착하여 소음저감 방법을 채택했다. 연구대상으로서는 항만에서 컨테이너(Container)를 운송하는 이동용 크레인(Transfer Crane)의 엔진 발전기 세트(set)로서, 각 구성품(엔진, 발전기, 방열 팬)의 음향 덮개의 내부구조를 설계하였다. 그리고 덮개 내부 온도를 일정하게 유지시키기 위하여 엔진에서 방사하는 방열공기와 내부로 흡입되는 냉각공기의 열유동장 해석도 병행하였다.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.4 no.1
• /
• pp.3-12
• /
• 1994

본 연구는, 복잡한 비선형시스템의 표현에 뛰어난 능력을 갖고 있는 TSK형 퍼지모델로 부터 전체시스템의 안정성을 보장할 수 있는 퍼지상태제어기의 설계방법을 제안한다. 그 퍼지상태제어기는 TSK형 퍼지모델과 같은 형태의 퍼지규칙들로 구성되며, 추론 방법 및 상태제어 파라미터 행렬을 구하는 방벙은 전체시스템의 상태천이행렬이 원하는 안정한 것이 될 수 있도록 정해진다. 또한 본 논문에서는, 현재 대부분이 숙련가에 의해 수동으로 조작되고 있는 컨테이너 크래인의 새로은 제어 방법을 제시하고 제안한 퍼지상태제어기를 적용한다.컨테이너 크래인의 모형을 만들어, 제어숙련가의 수동조작으로 결정되는 트롤리와 승강기의 규범속도를 퍼지모델로 표현하고, 트롤리와 승강기가 그 규범 속도에 따르도록 제안한 퍼지상태제어기로 제어한다. 제안된 방법을 실험한 결과 모형크레인의 궤적이 숙련가에 의해 만들어진 궤적과 매우 유사하게 됨을 알 수 있었다.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.3
• /
• pp.50-57
• /
• 2003

In this study, the structural optimal design was applied to the girder of over head crane. The optimization was carried out using ANSYS code fur the deadweight of girder, especially focused on the thickness of its upper, lower, reinforced and side plates. The weight could be reduced up to around 15% with constraints of its deformation, stress and buckling strength. The structural safety was also verified by the buckling analysis of its panel structure. It might be thought to be very useful to design the conventional structures fur the weight save through the structural optimization. The objective function and restricted function were estimated by the orthogonal array, and the sensitivity analysis of design variable fur that was operated.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.954-954
• /
• 2005

In this study new vibration isolation system was designed so as to decouple translational motion and rotational motion of a workstation as well as to maximize an efficiency of vibration isolation. Whole motion of the workstation as well as the transmitted vibration from the floor were compared at the two conditions; with and without the cradle system. It was shown that the cradle system had a clear effect to suppress the roiling motion of the workstation.

• Journal of Korean Society of Transportation
• /
• v.17 no.1
• /
• pp.159-171
• /
• 1999

This Paper aims to develop container terminal simulation models for medium and long term decision makings. It first undertakes in-depth survey of literature. finds its shortcomings and suggests some directions for improvement. It then proposes detailed design for the simulation models. Based on this it finally developes several simulation models and applies them to a hypothetical situation of a container terminal development. The results reveal that basic design questions such as length of quay, number of quay crane, size of storage area are well produced through the models.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2007.12a
• /
• pp.340-341
• /
• 2007

In case of Busan Port container terminals scale of a yard device chapter is small and narrow, and redundant works of device chapter facilities ability and transfer cranes are misgovernment occurring very much bemuse of this There is to the misgovernment that cannot support design ability of a container crane of quay because of this There is this in a change of marine transportation harbor environment to cross over to a large easel next of a ship, and a large problem cannot but become. Watched how redundant works were occurring in the second yards, and presented a problem Also, present the hint point tint these redundant works analyze how productivity of quay productivity and container crane is improved if solution works, and face to this.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.27 no.5
• /
• pp.379-384
• /
• 2014

This article describes the dynamic behaviors of a rubber tired gantry crane(RTGC) under typical load conditions which are used in the design of gantry cranes. In order to investigate the dynamic characteristics of an RTGC, we developed a finite element crane model for its huge structure. The finite element model was validated with the modal test results, e.g., natural frequencies and normal modes. And other components of RTGC were converted into detailed 3D CAD models and finally transformed to rigid body models in a dynamic simulation program ADAMS. The load conditions considered in this paper were a normal operating condition(OP1) and container hanging condition with no external loads. As a result, we could find there was large influence of crane's vibration owing to its structural stiffness and deformation. And the vibration of crane could made the movements of RTGC, which occurs crash or malfunction of crane works.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.17 no.5
• /
• pp.582-590
• /
• 2007

Nonlinear adaptive control of overhead cranes is investigated for anti-sway trajectory tracking with high-speed hoisting motion. The sway dynamics of two dimensional underactuated overhead cranes is heavily coupled with the trolley acceleration, hoisting rope length, and the hoisting velocity which is an obstacle in the design of decoupling control based anti-sway trajectory tracking control law To cope with this obstacle. we propose a fuzzy nonlinear adaptive anti-sway trajectory tracking control law guaranteeing the uniform ultimate boundedness of the sway dynamics even in the presence of uncertainties in such a way that it cancels the effect of the trolley acceleration and hoisting velocity on the sway dynamics. In particular. system uncertainties, including system parameter uncertainty unmodelled dynamics, and external disturbances, are compensated in an adaptive manner by utilizing fuzzy uncertainty observers. Accordingly, the ultimate bound of the tracking errors and the sway angle decrease to zero when the fuzzy approximation errors decrease to zero. Finally, numerical simulations are performed to confirm the effectiveness of the proposed scheme.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2005.11a
• /
• pp.267-268
• /
• 2005