• 기계저널
• /
• 제23권3호
• /
• pp.186-190
• /
• 1983

파괴역학 연구를 대상재료에 의해 구분하면 선형파괴와 탄소성재료의 파괴로 나눌 수 있다. 취 성파괴(brittle fracture)를 다루는 선형타성 파괴역학연구는 주로 여러가지 크랙의 모양, 시편모양, 부하형태에 따른 탄성응력분포 혹은 은력확대계수를 구하거나 에너지방법에 의해 안정비안정 크랙전파를 연구한다. 대개의 경우 취성파괴는 전체 구조물에 치명적이 되기 쉽다. 따라서 구조물 설계시에 취성파괴의 가능성을 배제하기 위해 재료의 적절한 선택과 같은 대책을 강구하는 것이 바람직하다. 다시 말해, 구조물 재료는 강도와 연성의 상황에 따른 적절한 조합을 필요로 한다. 오늘날 특수합금과 같은 고강도 금속에서의 취성화 경향이 증가하나 합금설계시 강도와 아울러 연성을 증가시키기 위한 여러 대책이 파괴역학 연구의 중요한 부분을 차지한다.

• 대한기계학회논문집
• /
• 제14권2호
• /
• pp.382-392
• /
• 1990

This study investigates the behavior of fatigue crack propagating between holes of holes filled with another materials. When holes of the holes filled with another materials are located symmetrically near a center crack, it is noted that the crack propagation rate is influenced by both the bonding force of the brazing part and the elastic modulus of another material. It is experimentally and analytically confirmed that the center crack stops when its tip reaches near the center line of the holes and a small crack is initiated from the boundaries of holes of the holes filled with another materials and it propagates to final fracture.

• 대한기계학회논문집
• /
• 제12권4호
• /
• pp.738-746
• /
• 1988

본 연구에서는 이상계 스테인리스강에서 문제시되고 있는 용접부에 대하여 용 접시 입열에 의한 영향이 큰 용착금속부(fusion line), 용접열영향부(HAZ)의 기계적, 금속조직적 변화와 관련하여 크랙전파특성을 규명하고 주사현미경(SEM)을 이용한 피로 파면을 고찰하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.786-789
• /
• 1997

Ti-6Al-4V has been used widely in biomedical field. But because of its toxicity, the ${\beta}$ stabilizing element, V, in Ti-6Al-4V has been replaced by Nb, Ta. Ti-10Ta-10Nb has been developed for biomedical applications. The fatigue crack propagation behavior of Ti-alloy(Ti-10Ta-10Nb) was investigated, in comparison with that of pure Ti. In order to better understand the fundamental fatigue behavior of Ti-10Ta-10Nb, rotating bending fatigue tests have been carried out. Ti-10Ta-10Nb has a better fatigue strength than pure Ti. In this paper, fatigue life has been predicted with Nisitani's equation of the fatigue crack propagation that can be established by measuring fatigue crack growth rates.

• 한국해양공학회지
• /
• 제1권2호
• /
• pp.83-92
• /
• 1987

Inorder ot estimate the running life of turbine rotors, fatigue crack propagation low, da/dN = C(${\DELTA}K)^m$, proposed by paris et al. has been widely applied. In this study, fatigue crack propagation rates for 16 samples of 1% Cr-Mo-V rotor steel were measured and statistical characteristics of m and C values in above equation were reviewed. The results are summarized as follows. 1. C and m follow a log-normal distribution and normal distribution, respectively. And the relation of C and shows a strong negative correlation. 2. Fatigue crack propagation equation can be expressed as da/dN=$4.11{\times}10^{-4}({\Delta}K/153.8)^m$, introducing the ralationship C=$C_oK_o^{-m}$. In this case, contribution of $C_o$ distribution to the distribution of log C shows very small compared to degrees of contribution by m.

• 한국정밀공학회지
• /
• 제11권4호
• /
• pp.47-57
• /
• 1994

This study investigates the crack propagation behavior to examine the effect of welding residual stress by the superposition method. Especially, as the crack propagation behavior is affected by the applied stress and the stress ratio in compressive residual stress filed, it is studied for three cases as follows; (1) $K_{min}$is smaller than l $K_{r}$l, (2) $K_{min}$ is smaller than l $K_{r}$l in the later stage, (3) $K_{min}$is lager than l $K_{r}$l. The resuslts show that the superposition method is very useful in all the three cases of compressive residual stress field, but is inappropriate in predicting the crack propagation behavior in tensile residual stress field.field.field.

• 대한기계학회논문집
• /
• 제13권5호
• /
• pp.901-910
• /
• 1989

본 연구에서는 2상계 스테인리스강의 모재 및 용접부에 대하여 대기중의 피로시험과 인공해수중의 부식피로 시험을 모재부와 용접부의 .alpha.,.gamma.상의 상비율 변화에 따른 조직의 변화 및 용접잔유응력의 영향이 크랙전파에 미치는 영향을 검토하였다. 응력-스트레인의 히스테리스곡선에서 균열닫힘 거동을 실측하고 이들의 결과로 부터 유효응력확대계수와 균열전파속도와 관계를 정리하여 이들의 문제를 해석하였다.

• 수산해양기술연구
• /
• 제24권1호
• /
• pp.44-49
• /
• 1988

본 연구에서는 피로파괴에 영향을 주는 여러 인자중에서 우선 피로크랙전파에 대한 시험편 두께의 영향을 검토하기 위하여 최초 두께 25mm인 일반구조용 압연강재를 평면가공하여 두께 5, 10, 15, 20, 25mm인 CT 시험편을 가공한 후 인장-인장편진반 복피로시험을 행하여 실험한 결과 다음과 같은 결론을 얻었다. 1. 피로수명이 가장 짧게 나타나는 임의의 시험편 두께가 존재하며, 본 실험의 경우에는 두께 15m인 시험편의 경우 피로수명이 가장 짧게 나타났다. 2. 피로크랙의 발생은 두께가 두꺼운 시험편의 경우가 늦지만 피로크랙 성장은 두꺼운 시험편의 경우가 빠르게 나타났다. 3. 본 실험에서 paris시의 계수 m의 값은 절위는 1.98~4.59로서 시험편의 두께가 두꺼울수록 m의 값이 크게 된다.

• 대한기계학회논문집A
• /
• 제24권7호
• /
• pp.1841-1846
• /
• 2000

To examine the effect of acid fog on the corrosion fatigue behavior in structural steel, fatigue tests under acid fog atmosphere were carried out in comparison with distilled water. The corrosive c omponents contained in acid fog pile up the corrosion products on crack face and show a crack branching and crack tip blunting. Therefore, due to these workings crack growth rate was reduced by decreasing the effective stress range in crack tip rather than under distilled water. Also the effect of sulfuric acid, which is the main component of acid fog, and testing speed on fatigue crack growth were examined. It was found that corrosion behavior was remarkably dependent upon pH and Hz rather than components of acid fog. According as pH and testing speed decrease below a specific value, crack growth was accelerated in comparison with distilled water. This reveals that due to liquid having strong acidity and slow speed of test the crack face dissolution was promoted, so crack closure was disturbed in the process of stress descent.

• 한국해양공학회지
• /
• 제13권3호통권33호
• /
• pp.108-113
• /
• 1999

In this study, CT specimens were prepared from ASTM A516 Gr. 65 which was used for pressure vessel plates for moderate and lower temperature service. Fatigue crack growth test was carried out in the environment of low temperature of $10^{circ}C, -10^{circ}C, -30${circ}C\;and\;-50^{circ}C$ and in the range of stress ratio of R=0.05 and 0.3 by means of opening mode displacement. Based on these test results, the characteristics from temperature and stress ration were shown as follows. 1) As the stress ratio, R increased da/dN and ${Delta}K$ of 2nd stage gradually decreased. And as R decreased, the effect of temperature became greater and greater. 2) As the temperature descended, da/dN decreased on a certain ${Delta}K$, and ${Delta}K$ did in a same da/dN. And the stress ratio, R exerted greater influence at the lower temperature. 3) The fatigue crack growth constant, m increased at $10^{circ}C$ and $-10^{circ}C$, snd decreased at $-30^{circ}C$ and $-50^{circ}C$ following the increment of stress ratio R. And m increased along with the reduction of temperature greatly decreased at $-30^{circ}C$ to come close to two(2).