• 한국융합학회논문지
• /
• 제5권1호
• /
• pp.23-27
• /
• 2014

본 연구에서는 소형 인장 시험편에 편심된 집중하중을 가하였을 때, 크랙 주변에서의 구멍의 존재유무, 개수 및 위치에 따른 전파 거동에 대하여 규명하였다. 시뮬레이션 해석을 통하여 시험편에서 발생하는 Strain energy와 변형량, 응력에 대해 알 수 있었다. 그리고 이들 Strain energy와 변형량을 바탕으로 응력확대계수를 구하였으며, 본 연구결과를 이용하면 구조물 내에 결함이나 구멍 등이 있을 때 그 파괴 가능성을 검증할 수 있다고 사료된다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제19권2호
• /
• pp.36-46
• /
• 1995

In this paper, fatigue crack propagation behaviors were investigated experimentally for the materials, carbon steel forgings (SF45A, SF50A, SF60A) which are used in the marine propeller shaft. The results obtained are as follows: The number of cycles required to grow crack length 1.30mm from microcrack initiation was about 60% of the total fatigue life. Fatigue crack propagation rate was expressed by the equation d(2a)/dN_B 2a/$N_f$ and the result was agreed well with the experimented data. And the equation d(2a)/dN=$C{\sigma}_a^m(2a)^n$ was evaluated also. Obtained material property m and n are 3~5 and 1-1.5 respectably, and the result was reasonably agreed to the data obtained from experiments.

• 대한기계학회논문집A
• /
• 제21권5호
• /
• pp.842-849
• /
• 1997

The aim of this study is an investigation of the interaction of two micro hole defects affecting fatigue crack initation life and propagation behavior. The locatio of two micro hole defects was considered as an angle of alignment and the distance between the centers of two micro hole defects. The fatigue cracking behavior is experimented under bending. When micro defects are located close to each other, the fatigue crack initiation lives are varied with their relative locations. In the experiments, the area of local plastic strain strongly played a role in the fatigue crack initiation lives. Therefore we introduce a parameter which contains the plastic deformation area at stress concentrations and propose a fatigue crack initiation life prediction curve. In addition, the directions and propagation rates of fatigue cracks initiated at two micro hole defects are studied experimentally.

• 한국산학기술학회논문지
• /
• 제7권2호
• /
• pp.97-100
• /
• 2006

연강에서의 동적인 크랙 전파는 충격 하중을 받는 3점 굽힘 시험편들에 의해서 연구되어진다. 시험편은 10mm의 두께를 가진 $320{\times}75\;mm$의 크기를 가지고 있다. 하나의 정적인 실험과 30.2 m/s 및 45.2 m/s의 충격 속도들을 가진 두 개의 동적 실험들이 행하여진다. 고속 카메라는 크랙 성장과 크랙 선단 개구 변위들의 데이터를 얻는데 사용되어진다. 두 개의 반쪽 시험편들의 상대 회전을 직접 측정하기 위해서 Moire의 간섭 패턴을 사용한다. 실험들에서는 크랙 전파에 대한 하중 속도의 영향이 없거나 약간의 영향이 있는 것으로 나타나고 있다.

• 한국해양공학회지
• /
• 제5권2호
• /
• pp.216-216
• /
• 1991

• 대한기계학회논문집A
• /
• 제21권7호
• /
• pp.1097-1105
• /
• 1997

Because of the existence of stress interaction field made by other defects and propagating cracks, the structure may be weakened. Therefore in this study, the crack behavior in the interaction field made by two different cracks is studied experimentally. In the experiment, vertical distance between two cracks and applied stress are varied to make different stress interacted field. In addition, the effect of plastic zone is used to examine crack propagation path and rate. Three types of crack propagation in the interacted field were found, and crack propagating path and rate of two cracks were significantly changed according to different applied stress as each crack propagates. And the results are attributed to the effect of the size and shape of the plastic zone.

• 대한기계학회논문집A
• /
• 제40권12호
• /
• pp.1013-1019
• /
• 2016

CFRP는 탄소섬유를 기반으로 수지를 합침하여 제조된 복합소재로, 높은 비 강도와 경량성을 지녀 다양한 분야들에서 널리 사용되어지고 있다. 특히 일방향 탄소섬유는 적층 각도를 적용할 수 있으며 이때 적용된 적층 각도로 구성된 CFRP는 적층 각도가 없는 것보다 더 높은 강성을 가지고 있다. 본 논문에서는 적층 각도 변화에 따른 CFRP 소형 인장시험편의 크랙 전파와 파괴거동에 관한 것으로, 각 적층 각도에 따른 크랙 성장의 특성을 고찰한다. 적층 각도가 증가함에 따라 최대 응력 값이 작게 나타나고 크랙 전파가 더디게 나타나지만, 적층 각도 $60^{\circ}$를 기점으로 그 응력이 다시 증가되므로 서, 적층 각도에 따른 한계를 보이고 있다. 본 연구결과는 기계구조물의 CFRP사용에 있어 구조물내의 결함이 발생하였을 때의 피로파괴 가능성을 검증하는 자료로 사용될 수 있다고 사료된다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권6호
• /
• pp.834-840
• /
• 2008

We carried out fatigue testing with materials of aluminum alloyC7075-T6, 2024-T4) by rotary bending fatigue tester. We investigated fatigue limit, fatigue crack initiation, fatigue crack propagation behavior and possibility of fatigue life prediction to the different small circular hole defect. The summarized result are as follows; Fatigue limit of the smooth specimens were related tensile strength and yield strength. In case of more large applied stress and small circular hole crack defect, the fatigue crack was grown rapidly. The fatigue crack propagation behavior proceed at according to inclusion. Fatigue crack propagation ratio appeared instability and retardation phenomenon in the first half of fatigue life but appeared stability and replied in the latter half. On other hand, this experimental data of the materials are appeared fatigue life predictability.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2005년도 춘계학술대회 논문집
• /
• pp.264-271
• /
• 2005

This study investigates the behavior of fatigue crack propagating between holes or holes filled with another materials. When holes or the holes bonded with another materials exist near center crack symmetrically, crack propagation rate is influenced by the bonding force of brazing part and the elastic modulus ratio of another material to matrix. It is experimentally and analytically confirmed that the center crack stops when its tip reaches near the center line of the holes and a small crack is initiated from the boundaries of holes or the holes filled with another materials and it propagates to final fracture. The mechanical behaviors of center crack near another materials are also investigated.

• 한국공작기계학회논문집
• /
• 제14권6호
• /
• pp.74-82
• /
• 2005

This study investigates the behavior of fatigue crack propagating between holes or holes filled with another materials. When holes or the holes bonded with another materials exist near center crack symmetrically, crack propagation rate is influenced by the bonding force of brazing part and the elastic modulus ratio of another material to matrix. It is experimentally and analytically confirmed that the center crack stops when its tip reaches near the center line of the holes and a small crack is initiated from the boundaries of holes or the holes filled with another materials and it propagates to final fracture. The mechanical behaviors of center crack near another materials are also investigated.