• 한국정밀공학회지
• /
• 제20권1호
• /
• pp.7-25
• /
• 2003

• 한국산학기술학회논문지
• /
• 제13권11호
• /
• pp.4956-4962
• /
• 2012

자동차의 다양한 부품 중 자동차 시트는 인간과의 직접 접촉 부위로서 승차감을 평가 할 수 있는 가장 기본적인 항목이다. 따라서 자동차 시트는 승차감과 동시에 충분한 강성과 강도를 가져야 할 것이다. 본 연구에서는 자동차 시트에서의 시트 쿠션 프레임과 백 프레임을 3D 모델링하였고, 쿠션 프레임의 비틀림 강도, 수직하중강도 시험, 백 프레임의 강도 시험 3가지 실험에 대해서 시뮬레이션으로 구조해석을 하였다. 해석결과, 쿠션 프레임 비틀림 강도 시험에서는 초기 전변형량의 최대값은 5.8421mm가 나왔고, 영구 전변형량의 최대값은 0.02539mm가 나왔다. 쿠션 프레임 수직하중강도 시험에서는 쿠션 프레임 앞쪽 끝단의 전변형량은 2.1159mm이고, 뒤쪽 끝단은 0.0606mm이다. 하중을 더 증가한 경우는 전변형량의 최대값은 3.1739mm가 나왔다. 3 가지의 백 프레임 강도 시험에서는 최대의 전변형량은 0.18634mm로 나타났다. 본 연구결과는 자동차 시트 쿠션 프레임 및 백프레임의 과도한 변형 및 파괴가 없음으로서 승객의 안전을 보장하는 충분한 강성과 강도를 검증할 수 있었다.

• 연구논문집
• /
• 통권28호
• /
• pp.73-87
• /
• 1998

A pneumatic control system of compressed air as a working fluid has a variety of advantages such as low price, high respondence, non-explosion and good control performance and thus has many applications in the field of automobile, electronic and semiconductor industry. However, it has a difficulty in contolling a precise position due to quick response of system and compressibility of working fluid and. in particular, shock stress may occur due to an external load, resulting in fracture of a cylinder cap unless cushion device is equipped in the linear actuator. To avoid this, a cushion device should be installed for damping effect of the external load and the supply pressure as well as for decreasing shock stress and vibration caused by high speed rotation. Previous studies include dimensionless analyses and computer simulations of cushion capability and experiments of horizontally-mounted cylinder performances. A new attempt is experimentally made in this study using a vertically-mounted cylinder under an operation condition of 4, 5 and 6 (bar) as supply pressure and 40, 70 and 100 (kgf) as external load. It turns out that the cushion pressure is mainly a function of the external load rather than the supply pressure. The cushion characteristics was also revealed in the meter-in circuit.

• 한국정밀공학회지
• /
• 제17권2호
• /
• pp.97-104
• /
• 2000

Pneumatic cylinder is widely used for mechanical handling systems. Often, the impact occurs at the both ends points of pneumatic cylinder and generates destructive shock with in the structural operating members of the machine or equipment. To reduce the damage of system, therefore, shock absorbing devices are required. Cushioning of pneumatic cylinders at one or both ends of piston stroke is used to reduce the shock and vibration. The cylinder body have to withstand under high velocity and load. In this research, the pneumatic cushioning cylinder moving tests have been conducted for different load mass and supply pressure. The velocity of pneumatic cylinder actuation system with multiple orifice cushion sleeve which is set vertically controled with meter-in/out system. This study examines the dynamic characteristics of pneumatic cylinder with cushion devices. It turns out that the cushion pressure is mainly a function of the external load rather than the supply pressure. The cushion region characteristics was also revealed in the meter-in system.

• 한국자동차공학회논문집
• /
• 제21권6호
• /
• pp.24-30
• /
• 2013

This paper studies the comparative analysis on two different internal cushion devices (the types of needle and relief valve) used to absorb the energy which is generated when the pneumatic cylinder moves with the load at meter-out speed control system. The effect at varying the piston velocity under same driving condition is mainly investigated. The simulation results on pressure in the cushion chamber and the dynamic behavior of the relief valve type cushion device are compared with the needle valve type. Design and performance are improved with the cushion configuration of better quality at high-speed pneumatic cylinder. Based on the relation between absorbed energy and impact energy at cushion process, cushion performance at pneumatic cylinder is evaluated.

• 기계와재료
• /
• 제11권2호통권40호
• /
• pp.53-61
• /
• 1999

The paper describes a characteristics analysis for cushion pressure and cushion stroke time at hydraulic cushioning cylinder. In hydraulic cushioning cylinder, an inertia exaggerates a kinetic energy at a reciprocation that collide with an end of stroke and generate a destructive shock, noise and vibration within the structural and operating member of machine of equipment. In order to reduce which cause to undesirable noise, vibration and fatigue in hydraulic control system, it is indispensible measure a cushion parameters at cushion region of hydraulic cushioning cylinder. A cushioning device is applied to absorb high impact energy and to decelerate a fast travelling object, too. At an experimental results, it turns out that cushion pressure is mainly a function of the external load and cylinder input flowrate rather than the supply pressure.

• 한국공작기계학회논문집
• /
• 제13권1호
• /
• pp.76-80
• /
• 2004

Cushion sleeves are used in pneumatic cylinders to avoid impact force arising at the end stroke part between moving piston and cylinder cover. In this study low kinds of cushion sleeves are designed, manufactured and attached to the pneumatic cylinder to be experimented. The effects of cushion sleeves on cushion characteristics are investigated. e results are as follows; the pressure variation of cushion room with orifices are inspected to be smaller than that of cushion room without orifices. So sleeves with orifices are expected as protecting from impact and vibration of pneumatic cylinder. The object of this study is to provide data on the charactristics of pneumatic cushion sleeve in case of being used in industry.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2008년도 추계학술발표논문집
• /
• pp.456-458
• /
• 2008

RV 차량의 쿠션 패널을 생산하여 조립하는 공정은 작업자의 오류로 인한 불량이 많이 발생된다. 본 연구에서는 이러한 불량을 제거하기 위한 화상검사장치를 개발함을 목적으로 한다. 이러한 장치개발은 쿠션패널 고정용 지그, 카메라 인식영역, 이송을 위한 X-Y테이블, 카메라 모듈, 제어기 로 구성되어진다. 본 논문에서 제안한 화상검사장치를 설계하고 화상인식 프로그램을 통해 불량을 판정하여 화상검사 시스템의 타당성을 검증하였다.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2006년도 추계학술발표논문집
• /
• pp.73-75
• /
• 2006

본 논문은 현재 운행 하고 있는 과천선의 도시철도를 중심으로 충돌 속도별 인명 상해치를 연구 하였으며 더 나아가 에어쿠션의 유무에 따른 인명 상해치를 저감시켜 많은 인명을 구조하기 위한 에어쿠션의 개념 설계를 하였다. 그 결과 에어쿠션 장착에 따른 높은 인명 구조 효과가 있음을 제시 하였으며 개념 설계를 기초로 하여 시험을 수반한 해석을 실시한다면 선로 침입자를 위한 도치철도 구조장치를 개발 할 수 있을 것이다.

• 유공압시스템학회:학술대회논문집
• /
• 유공압시스템학회 2010년도 춘계학술대회
• /
• pp.44-48
• /
• 2010

Hydraulic cylinder is one of many part on the hydraulic excavator working. Cushion has the important function of protecting cylinder against the shock when the piston comes at end position. Also, the cushion of cylinder has a great effect on the operator's comfortable. In this study, we have done a comparative analysis through computer simulation and experimental value on pressure that occurs on a cylinder moving excavator.