• 제목/요약/키워드: 콘크리트 포장 덧씌우기

검색결과 47건 처리시간 0.018초

고속도로 접착식 콘크리트 덧씌우기 포장의 공용성 분석 (Performance Evaluation of Bonded Concrete Overlay in Highway)

  • 박종원;김영규;한승환;이승우
    • 한국도로학회논문집
    • /
    • 제16권1호
    • /
    • pp.1-10
    • /
    • 2014
  • PURPOSES : This study aimed to evaluate the long-term performance of bonded concrete overlay in Korean Highway, and factors influencing the performances. METHODS : The evaluation for long-term performance of bonded concrete overlay is investigated based on the following study : i) The pavement distress of number of bonded concrete overlay sections in Korean highway are collected through field measurement, and PCI for each section is calculated. ii) Performance of LTPP data of bonded concrete overlay sections in U.S.A is analysed. And it is compared with bonded concrete overlay of Korean highway. iii) An analysis of the factors influencing to long-term performance of bonded concrete overlay is investigated. RESULTS : Performance analysis was confirmed that the overlay thickness was affecting significantly on the Bonded Concrete Overlay life. The comparison of LTPP data(U.S.A) and field measurement data(Korean) was showed. CONCLUSIONS : It was showed that the performance of Korean bonded concrete overlay is relatively lower than that of the bonded concrete overlay in U.S.A. The cause of lower performance can be explained by the lack of overlay thickness.

아스팔트 덧씌우기의 반사균열 지연을 위한 지오그리드의 적용성 연구 (Performance of Geogrids for Retarding Reflection Crack of Asphalt Overlay Pavement)

  • 김광우;도영수;김번창;이문섭
    • 한국도로학회논문집
    • /
    • 제7권2호
    • /
    • pp.1-12
    • /
    • 2005
  • 본 연구는 노후된 시멘트 콘크리트 포장 위에 덧씌운 아스팔트 혼합물의 반사균열 지연을 위하여 바인더 2가지 일반과 개질, 바닥 보강재로 그리드 3종류와 Fabric 2종류의 효과를 평가하기 위하여 수행하였다. 보강재는 공시체 제조시 미리 슬래브 몰드 바닥에 깔고 가열 아스팔트 혼합물을 몰드에 부은 후 다짐을 하여 아스팔트 슬래브 공시체와 일체화시켜 콘크리트 블록 위에 덧씌우기 형태로 택코팅하여 부착하였다. 본 연구를 위하여 휨파괴(mode I) 및 전단파괴(mode II)반사균열 시험을 수행하였다. 시험결과, 일부의 그리드의 보강이 휨파괴 및 전단파괴에 의한 반사균열의 지연에 효과가 있는 것으로 나타났다. 특히 LDPE 개질아스팔트와 함께 사용하면 반사균열 지연에 큰 효과가 있음을 알 수 있었다.

  • PDF

고탄성 응력흡수층의 반사균열 저항특성 연구 (Behavior of High-elastic Stress Absorbing Interlayer for Reflective Cracking Resistance)

  • 박태순;이요섭
    • 대한토목학회논문집
    • /
    • 제26권3D호
    • /
    • pp.445-451
    • /
    • 2006
  • 본 연구는 노후 콘크리트 포장의 아스팔트 덧씌우기에서 발생하는 반사균열을 억제하기 위한 방안으로 노후 콘크리트와 아스팔트 표층 사이에 응력을 흡수할 수 있는 중간층 혼합물을 개발하기 위하여 수행되었다. 고탄성 응력흡수층은 휨 변형과 수평변형으로 인하여 발생하는 균열응력을 흡수 또는 분산 시킬 수 있는 탄성과 유연성, 균일성 및 불투수성이 요구된다. 본 연구로부터 국외제품을 모델로 국산 바인더를 개발 하였으며 이를 사용하여 제작된 혼합물 시편은 시방규격에 만족하였다. 기존 덧씌우기 공법과 비교한 시험으로부터 고탄성 응력흡수 중간층이 설치된 경우 설치되지 않은 경우에 비하여 전단파괴수명과 수평변위저항도는 약 4배가 증가되었으며 표층재료의 선정에 따라 전단파괴수명은 5배, 수평변위저항도는 9배가 증가되어 고탄성 응력흡수 중간층이 반사균열 억제에 우수한 것으로 본 연구에 나타났다.

동시포설 공법을 위한 택코트 재료의 기초 성능 평가 연구 (Basic Performance Evaluation of a Tack Coat Material for Use with a Spray Paver)

  • 조신행;김경남;;김낙석
    • 대한토목학회논문집
    • /
    • 제41권6호
    • /
    • pp.737-744
    • /
    • 2021
  • 최근 택코트 부착성능의 중요성이 높아지며 시공과정에서의 택코트 손실을 방지하기 위해 동시포설공법이 제안되고 있다. 동시포설공법은 아스팔트 페이버에 택코트 살포장치를 부착하여 택코트 살포와 동시에 아스팔트 혼합물을 포설하는 공법이다. 노후 콘크리트 포장의 아스팔트 덧씌우기 포장은 강성포장 위에 연성포장이 적용되기 때문에 이질적인 재료에 따른 부착성능의 확보가 더욱 중요하다. 이에 따라 동시포설공법으로 적용이 가능하고 이질적 재료에도 충분한 부착성능을 나타내는 택코트 재료가 필요하게 되었다. 본 연구는 동시포설공법을 위해 개발된 택코트 재료의 기초성능을 평가하기 위해 다양한 조건의 부착강도 실험을 수행하였다. 부착성능 평가결과 양생조건과 택코트 손실에 의해 부착성능에 차이가 발생함을 알 수 있었으며, 개발 재료는 동시포설공법과 동일한 시공조건 모사 실험에서 기존 재료 대비 인장접착강도 1.21배, 전단부착강도 1.99배 높은 부착성능을 나타내어 동시포설공법에 적용하기에 적합한 것으로 나타났다.

비접착식 콘크리트 덧씌우기 포장에서의 아스팔트와 Geotextile 중간층에 대한 영향 평가 (Evaluation of the Effect of Asphalt and Geotextile Interlayer on Unbonded Concrete Overlay)

  • 조성환;임정혁;황성도
    • 한국도로학회논문집
    • /
    • 제16권2호
    • /
    • pp.91-98
    • /
    • 2014
  • PURPOSES : The objective of this study is to investigate the effect of asphalt and geotextile interlayer on the fracture behavior of unbonded concrete overlay through a laboratory composite beam test. METHODS : In order to evaluate the effect of interlayer materials on the fracture behavior of unbonded concrete overlay, a laboratory test of composite beam was conducted with different types of interlayer. The test results of the composite beam using two types of geotextile interlayer with different thicknesses were compared to the test results of the composite beam using the tradition type of asphalt interlayer. The unbonded concrete overlay on the existing concrete pavement without interlayer was set for the control condition. RESULTS AND CONCLUSION : Overall, the laboratory composite beam test results did show the effect of asphalt and geotextile interlayer on the fracture behavior of composite concrete beams. The three-layer geotextile interlayer and HMA layer both increase the peak load when the first macrocrack occurs in the top concrete beam, while the HMA interlayer causes the smallest load drop percentage after the first macrocrack. The three-layer geotextile did show better performance than the single-layer geotextile through the greater peak load and smaller load drop percentage. It indicates that the thickness of geotextile interlayer will affect the fracture behavior of unbonded concrete overlay and the thicker geotextile interlayer is recommended.

접착식 콘크리트 덧씌우기 포장의 부착거동 연구 (A Study on the Bond-Behavior of Bonded Concrete Overlays)

  • 김영규;이승우;한승환
    • 한국도로학회논문집
    • /
    • 제14권5호
    • /
    • pp.31-45
    • /
    • 2012
  • PURPOSES: In Korea, rapid maintenance of distressed concrete pavement is required to prevent traffic jam of the highway. Asphalt concrete overlay has been used as a general maintenance method of construction for aged concrete pavement. AC overlay on existing concrete pavements experience various early distresses such as reflection crack, pothole and rutting, due to different physical characteristics between asphalt overlay and existing concrete pavement. Bonded concrete overlay(BCO) is a good alternative since it has advantages that can reduce various distresses during the service life since overlay material has similar properties with existing concrete pavements. Recently, BCO which uses the ultra rapid harding cement has been applied for maintenance of highway. BCO has advantage of structural performance since it does monolithic behave with existing pavement. Therefore, it is important to have a suitable bond strength criteria for securing performance of BCO. Bond strength criteria should be larger than normal tensile stress and horizontal shear stress occurred by traffic and environmental loading at bond interface. Normal tensile stress and horizontal shear stress need to estimated for the establishment of practical bond strength criteria. METHODS: This study aimed to estimate the bond stresses at the interface of BCO using the three dimensional finite element analysis. RESULTS: As a result of this study, major failure mode and maximum bond stress are evaluated through the analysis of normal tensile stress and horizontal shear stress for various traffic and environmental load conditions. CONCLUSIONS: It was known that normal tensile stresses are dominated by environmental loading, and, horizontal shear stresses are dominated by traffic loading. In addition, bond failure occurred by both of normal tensile stresses and horizontal shear stresses; however, normal tensile stresses are predominated over horizontal shear stresses.

초속경시멘트를 이용한 라텍스개질 콘크리트의 내구특성 (Durability of Latex-Modified Concrete with Rapid-Setting Cement)

  • 윤경구;정원경;최상릉;김동호;이봉학
    • 한국도로학회논문집
    • /
    • 제4권2호
    • /
    • pp.1-8
    • /
    • 2002
  • 최근 새로운 교면포장 재료로 사용되고 있는 라텍스 개질 콘크리트(LMC; Later Modified Concrete)는 부착강도 및 휨 강도가 우수하고 염분 및 수분침투에 방수효과가 있어 점차 활용이 증가될 전망이다. 또한, 초속경시멘트를 사용한 라텍스 개질 콘크리트(RSLMC; Rapid-Setting Latex Modified Concrete)는 3시간에 실용강도를 발휘하여 긴급을 요하는 공사나 보수재료로서 적합하나, 염화물의 침투 및 동결융해로 인한 내구성능 저하 등의 문제가 검증되지 않아 이에 대한 연구가 필요한 실정이다. 따라서, 본 연구에서는 RSLMC의 내구특성을 평가하기 위해 염소이온 투과실험 및 동결융해 저항성 실험을 수행하여 투수특성과 동결융해 저항성을 분석하였다. 실험은 ASTM 규정과 KS 규정에 따라 실시하였으며, 실험변수는 라텍스 혼입률 0, 5, 10, 15, 20%와 소포제 혼입률 0, 1.6, 3.2, 4.8, 6.4%로 수행하였다. 실험결과 RSLMC는 라텍스 혼입률 15%에서 소포제 혼입량에 상관없이 모두 100이하의 전하량을 나타내어 매우 낮은 투수특성을 보였다. 또한, 소포제의 혼입률 3.2% 이상인 경우 동결융해 300 싸이클까지 상대동탄성계수가 90% 이상을 유지하여 소포제의 사용이 동결융해 저항성에 효과가 있는 것으로 나타났다.

  • PDF